QUOTE(beplouis76 @ Apr 4 2017, 12:14 PM)
the file just 30GB+
all video play fine. It only happen after playing video more than 3 hours
Multi 2160p 4K UHD Bluray HEVC10 SDR Dolby Atmos 7.1. Inside have 5.1 audio also.
Optical to tv, q10Pro direct hdmi to TV
It just sound louder at 5.1. I am not talking about the effect. My question is why it loops?
May i know what is the different since I connect q10pro direct to the tv then optical send audio to sound bar?
unless the file u have is a short one, i doubt with such heavy specs it is as small as 30gb.
it should be >50gb, more likely 60-66gb.
hence, i suspect the ripping of that file is not well done.
u can try the same title but a diff rip, similar or bigger size and see if it is the same.
you can also get a diff similar specs file and try it, see if same problem occurs.
the audio part... i suspect the problem is coming from yr tv ARC.
for yr set up, it is better to have optical or coaxial audio output from q10pro direct to soundbar.
if u do tv optical back to soundbar, u are using the ARC function of the tv.
some devices do not work well with some tv ARC's and are known to cause problems.
also, tv ARC capability is typically not of high standard, may not cope with HD audio well - TV makers focus on video, not audio.
if u disconnect the soundbar, u isolate it.
then u can see if q10pro->tv hdmi video and audio eliminates a possible problem caused by soundbar and/or the tv ARC.
similarly, if u do q10pro audio->soundbar, audio is now independent of the TV.
so, if the audio loop problem persist, u know it has nothing to do with the tv or tv ARC.
if that solves the problem, u know yr tv ARC isn't good enough to handle HD audio.
bit by bit, u can narrow down the root cause(s)!
This post has been edited by AVFAN: Apr 4 2017, 02:27 PM