Then I afraid it may not be the case that the LEDs are dying, but may be due to some other electrical supply/components problem?

This post has been edited by Human10: May 21 2013, 12:02 AM

Spoonfeed delivered, ayam bought from here last tiem.
http://shop34410686.taobao.com/search.htm?...e&queryType=cat

BTW, ayam suggesting those square square one, since they fit in the led mount just nice.
Do note that the suggested size is 2x3x4mm one,
Eq,
http://item.taobao.com/item.htm?spm=a1z10....&id=2109929126&
http://item.taobao.com/item.htm?spm=a1z10....&id=2266466854&

Personal example,


This post has been edited by Human10: May 21 2013, 07:48 PM

Just from /K/, hence da strong Mangland.

Sorry mang, I failed due to da keyboard poison.

This post has been edited by Human10: May 21 2013, 10:10 PM

Sell it cheap cheap locally.

The position mounting stem for spacebar is different from normal (ducky, filco and so on) standard, thus incompatible.

lol, sadly keycool same standard as Leopold, trololol...

But if I not mistaken, some models of keycool do use different standard, and they do made aftermart spacebar that are Filco compatible IINM.

This post has been edited by Human10: May 23 2013, 12:03 AM

Not really sure bout it, but I suggest that you can get a individual spacebar from keycool (either those colorful rainbow ABS one or the black/white/grey PBT one) and compare them. IINM, KC made those spacebar universal.

Yup, this is the one made by KC.

I assume/bet that it is Ducky compatible, but ayam not responsible for any incompatible case.

Heh, meanwhile SS is using another standard of their own.

Aiyo, if you like ergo clear, the easiest way is to buy a PCB mounted TKL (probably Neo Zelia or PLUM96) with brown/blue/red switch.

Later, go taobao buy some vintage and old used but still new clear switch pcb for stem harvesting.

Meanwhile, you can start source for 62g spring already, as they should serve better than blue/brown/red spring (also, remember to count me if you manage to find source for the 62g spring ).

This post has been edited by Human10: May 24 2013, 02:57 PM

There isn't board that come directly with ergo clear, except may be some custom korean boards...

Also, as my previous post, try to get a PCB mounted TKL, it is super easy to mod with no need to soldering, even bangla can do it

Previously i bought it from here, the switches should be quite new cause I don't think that function key will be utilised to a great extend. But since I don't really own a whole new MX Clear board, thus can't give you a definite answer.
http://item.taobao.com/item.htm?spm=a230r....&id=14317941387

This post has been edited by Human10: May 24 2013, 03:08 PM

Hokay ayam sold, time for another bulk/interest check thread.

But only 100 spring may not be enough for fullsize users.

And when quantity is large, sure some spring will undergo some defects, so share among 4 ppl is safer option.

1. Buy PCB mounted TKL
2. Buy switches (or secondhand one if you want to cut cost)
3. Buy the 62g spring we discussed above
4. Combine them all
5. ????
6. Enjoy your ultimate board!!!

Neo Zelia and PLUM 96.

Actually I got quite a lot of this type of stabiliser left.
http://item.taobao.com/item.htm?spm=a230r....&id=14317941387

PMed.

rich fag spotted.