vga cooler, 4 9600
|
|
 Apr 21 2006, 03:43 AM
Return to original view | Post
#1
|
 
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary   
|
i wud choose silencer too...
|
Quote|
|
|
|
|
May 3 2006, 12:32 PM
Return to original view | Post
#2
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(Hiwatari @ May 2 2006, 04:35 PM) say...wanna put 92mm fan blowing to the card ermm....a forumer said this way will cool the vga better than those fancy hsf w/ bling2 any suggestion on the core heatsink? what brand can fit 92mm fan?prefer copper   bro, u wanna try out the FAN CARD.... u can DIY the FAN CARD, using 2 x 80mm FAN or 2x 92mm FAN and 1x PCI BACK SLOT and 15 pieces of cable ties.. U need an extra PCI slot underneath the AGP card to install this DIY CARD. U can use Stock AMD heatsinks on ur card.... |
|
|
May 3 2006, 12:35 PM
Return to original view | Post
#3
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(Amedion @ May 2 2006, 06:53 PM) i am more noob than u liao.. thermal paste can get from Computer shops, or u can even buy from some online forummers here in LYN. where can get thermal paste? izzit safe to do dat on my vga.. if spoil i no $$ to get new 1 edi ..  anyway, wat's ur current max core/mem for ur 9600 pro ? mine is 456.30 / 218.70// moderno / dinster / bombman they have a few thermal paste's for sale... |
|
|
May 3 2006, 09:28 PM
Return to original view | Post
#4
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(Hiwatari @ May 3 2006, 02:46 PM) where 2 get?xpensive?cable ties is what?like ide cable? 2 x 80 mm FAN (Can get from Garage sales for RM 5 - RM 10 / per piece)dun hv amd...running on p4  Cable Ties (Can get from Hardware Shop - RM 1 for 10 pcs - 20 pcs) Can get the amd heatsink from garage sales too around RM 5 - 25 .. Extra pci slot cover - from ur casing ... Have a Look... maybe u could find a cheap one to mod.. TOTAL : RM 10 + RM 1 + RM 10 = RM 21 If u need more, maybe i wud have to make a guide... but my camera sucks at nite time.... darn.... |
|
|
May 3 2006, 09:29 PM
Return to original view | Post
#5
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(sbz2000 @ May 3 2006, 04:05 PM) how do i pull off that original heatsink from the memory. it seem stuck hard. afraid of pulling it forcely.... Original heatsink from ur Grapich Card's Memory ? erm... try twisting it a bit.... ( MAKE SURE U HAVE PULLED OUT ALL THE CLIPS attached to the heatsink.) it should come off.... GOOD LUCK |
|
|
May 3 2006, 09:55 PM
Return to original view | Post
#6
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
hohoho...
no lah..... if u have everything i will show u how to put it together... erm... i will try and make a guide ASAP... now the camera with me but the lighting will suck. so maybe its best i do it during daylight.... its only to cool from bottom, if from top i dunt think its possible, but u could, be CREATIVE If u want something like artic silencer, then i suggest u get a PCI Exhaust FAN CARD, or ARTIC SILENCER the only cheap way to direct air out is PCI exhaust fan card. This DIY Fan Card is just a cheap option to cool down ur GC. thats all |
|
|
|
|
|
May 3 2006, 10:11 PM
Return to original view | Post
#7
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
Here is the image of My PCI EXHAUST FAN CARD. sucking air from my GC
NOT the 2x 80mm FAN CARD.  |
|
|
May 3 2006, 10:30 PM
Return to original view | Post
#8
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
yeah.... i agree....
i did'nt have time to DIY a new one.... erm maybe i ll make a quick one... just to show u how it may look... Maybe give me 2 days .... u should get urs and i will guide u in making 1 |
|
|
May 3 2006, 10:37 PM
Return to original view | Post
#9
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(Hiwatari @ May 4 2006, 12:34 AM) thanks man The one i am currently using is bought as is.... its called.btw, that pci card...u DIY or buy 1 piece like that?i mean complete w/ fan n director(what do we call that thing huh? ) that directs air out of the casingPCI EXHAUST FAN CARD / PCI FAN CARD the one i am about to DIY is from scratch. |
|
|
May 4 2006, 10:53 AM
Return to original view | Post
#10
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(sbz2000 @ May 4 2006, 11:47 AM) i heard not so good things about coolviva but i also heard good things from internet review, how is it rate actually? any pros and cons? i dunt know.... i tried COOLVIVA before.... I trierd OCing My GC, after a few hours i get artifacts and a lot of em.... so after that, my pc kept restarting each time it loads windows... i took out the GC and reinstall back the original Heatsink. and use a 2x 80mm FAn to blow at the heatsink. Wala... My GC is back to normal..... i prefer to use the 2x 80mm FAN than the CoolVIVA |
|
|
May 5 2006, 07:12 AM
Return to original view | Post
#11
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(sbz2000 @ May 4 2006, 11:04 AM) there goes my money going down the drain erm..... it sounds like u bought a COOLVIVA ?? anyways, if u already bought it, just give it a shot.. can always add the 2x 80mm Fan below the COOLVIVA |
|
|
May 5 2006, 10:12 AM
Return to original view | Post
#12
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
Try out the 2x 80mm Fan Mod. maybe it wud help
|
|
|
May 5 2006, 04:05 PM
Return to original view | Post
#13
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
yup...
maybe will do the mod tonite..... didnt get the proper fan yet... maybe ill just use the chapalang fan i have at home... Will show u the pics once its done |
|
|
|
|
|
May 11 2006, 08:00 AM
Return to original view | Post
#14
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
Will post is as soon as possible ... Got some unfinish work and exams coming up
Dont worry , |
|
|
May 12 2006, 05:35 PM
Return to original view | Post
#15
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
HERE is THE 2x 80mm FAN DIY
* SORRY for the PICS, CAMERA GILA... will update the pics once i have the proper time TOOLS 1. Cutter 2. Lighter / Something hot to shrink a heatshrink ITEMS needed 1. Cable Ties , around 20 or more 2. Black Tape or Heatshrinks. 3. 2 x 80mm FAN ( any brand, up to you ) 4. PCI SLOT Back Plate  1. Put the 2 80mm FAn side by side, and slide in the cable tie between the two fan.  so u will be attaching 4 cable ties to connect the two fan. 2. After that, tighten each cable tie nicely and cut the excess cable with cutter  3. Insert another cable tie at the end to hold the PCI SlOT BACKPLATE. Like in the pics. Cut the excess Cable...  4. Once u are done. Cut the two wires from the two fan evenly and Connect the wires between the two fan to a molex connector. 2 fan to 1 molex. remember RED to RED . BLACK TO BLACK  f you dont want to do any cutting u can use 2 molex to connect the fan together, if u want to make it look nice and neat, u can sleeve it THIS IS THE COMPLETED FAN CARD  If there is anything u want to ask, feel free to ask me GOOD LUCK This post has been edited by zahri: May 12 2006, 05:38 PM |
|
|
May 13 2006, 09:12 AM
Return to original view | Post
#16
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
owh....
Stacker user ehh.... envy u man..... hehehe.... blur2 , on what casing to get, Ammo for jalan2, and stacker to sit tight at home... |
|
|
May 13 2006, 07:41 PM
Return to original view | Post
#17
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
hehehe....
JUST GOT my ARTIC silencer today.... will pasang WEDNESDAY nite or evening hehe...... |
|
|
May 23 2006, 03:26 PM
Return to original view | Post
#18
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(HanevE @ May 22 2006, 08:21 PM) coolviva vs evercool VC-RF... I wud Say EVERCOOL VC-RF definitely ! which one is better??  |
|
|
May 29 2006, 12:37 AM
Return to original view | Post
#19
|
|
Senior Member
1,526 posts Joined: Jan 2006 From: Between Those Legs Position : Missionary
|
QUOTE(zhen^wei @ May 28 2006, 10:31 AM) where u bought artic silencer ? Got it from a friend,he bought it last year i think, but never used it coz, the GC went to heaven.... hehe... TOO BAD for ME..... THE HEATsink Wont fit my GC. need to grind the backplate a bit.. darn. !! |
| Change to: |  0.0189sec
 1.06
 6 queries
 GZIP Disabled
Time is now: 21st December 2025 - 01:26 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.