Alcatel One Touch Glory 2S [Official Thread], AKA T'POP
|
|
 Apr 24 2013, 04:37 AM
Return to original view | Post
#1
|
 
Junior Member
48 posts Joined: Dec 2009 
|
at step 9, when i load into CWM and then connect to pc, it shows me
-- logo.bin ...it is copied -- __nodl_expdb ...it is copied -- __nodl_yaffs_system.img ...it is copied -- __nodl_custpack ...it is copied -- __nodl_mobile_info ...it is copied --- task is complete --- --- Unknown ROM structure, backup NOT possible! --- ATTENTION! Recovery doesn't suit this phone! --- Unknown ROM structure, backup NOT possible! why is this so? i did step 7 and 8 very nicely...but this  |
|
|
|
|
|
Apr 24 2013, 07:12 AM
Return to original view | Post
#2
|
|
Junior Member
48 posts Joined: Dec 2009
|
wooho...bricked my phone and one touch upgrade cant unbrick it. after downloading all stuff..when i proceed to plug in the phone, it says [COM0] 4050 error.....zzz
then it asked me to unplugged and plug again...(all with battery out) followed all the instructions and still fail.zzz |
|
|
Apr 24 2013, 03:51 PM
Return to original view | Post
#3
|
|
Junior Member
48 posts Joined: Dec 2009
|
QUOTE(besheda @ Apr 24 2013, 01:08 PM) Connect ur phone without battery first. Windows detect or not? yes i did it without battery, windows detect...If detect, check at device manager if the correct driver is installed. If not installed the driver first If i'm not mistaken error 4050 is due to driver. Do try  but i still not satisfied with my drivers, i see Alcatel Andriod ADB and DA USB VCOM Port installed. is this correct? sometimes it shows YELLOW warning, sometime not. f***ED UP PC! |
|
|
Apr 24 2013, 03:55 PM
Return to original view | Post
#4
|
|
Junior Member
48 posts Joined: Dec 2009
|
QUOTE(wicktoria @ Apr 24 2013, 02:28 PM) Did any steps before went smoothly? In step 8, u didn't get a 8038 error? 1) yes, step 1-8 went smoothly, NO 8030 error (cause i change those custpack, nodl mobile info...bla bla)Hurm, how bricked? When you boot, does the screen only went as far as the white screen with alcatel logo on it? If so, maybe you can try this; when you arrived at that white screen, press and hold the power button until the phone turns off, then try booting up again. Repeat for 4-5 times (maybe even 10 times? lol!). My phone now have this issue where it was stuck there at the white screen, but, after some tries with the method above, it eventually manages to boot up normally. Happens every time i boot up, even after i managed to root it.  2) then in step 9, when i boot into recovery, plug in to MTK driodtools, then it shows the unknown device bla bla.. 3) the back up button, super su, delete china all "GREYED" cant click after duno what happen, my phone only boot into grey screen, without white alcatel screen where there is animations so i plugged into oneotuchupgrades, and it show me wrong device even thou i chose 4010. does anyone have the STOCK boot.img? maybe i can try to flash the stock boot into it.  |
|
|
Apr 24 2013, 11:01 PM
Return to original view | Post
#5
|
|
Junior Member
48 posts Joined: Dec 2009
|
Pure white user reporting with bricked phone
|
|
|
Apr 25 2013, 12:32 AM
Return to original view | Post
#6
|
|
Junior Member
48 posts Joined: Dec 2009
|
QUOTE(besheda @ Apr 25 2013, 01:02 AM) Edited. Will upload stock rom for u guys Now can't turn on already. But still can be detected by windows as MTK port.If still can turn on, boot to recovery and detect by windows it still far from totally 'bricked' The blue charging light still got when plugged in. Tried to flash with recovery.img and boot.IMG but error 8030 pop out Ps: I actually think it the driver/port that makes the problem. I can't seems to install driver as it is not digitally signed and even if I manage to install, it shows could not start(code 10) This post has been edited by nse890514: Apr 25 2013, 12:34 AM |
|
|
Apr 25 2013, 01:24 AM
Return to original view | Post
#7
|
|
Junior Member
48 posts Joined: Dec 2009
|
QUOTE(besheda @ Apr 25 2013, 02:06 AM) Install this driver. Its the complete set for MTK device. This should be no problem in unbricking & rooting. Im using on windows 7 x64 tried to install and it shows code10 error, driver could not start..- http://d-h.st/p3m Btw, uploading rom on broadband took ages  in MTK folder>backup>got recovery.img and boot.img, is it the STOCK.img? how do i flash back into the phone? i tried, loading the scatter file, then TICKED this 2 .img, the i run DOWNLOAD, plugged in the phone, and done(OK) then i put in the battery and turn on the phone, still FAILED. no response. P/S: what does the FORMAT, FIRMWARE>UPGRADE, and DOWNLOAD button does in SPFT? see what i did here(DOWNLOAD): 
This post has been edited by nse890514: Apr 25 2013, 01:27 AM |
|
|
Apr 25 2013, 02:21 PM
Return to original view | Post
#8
|
|
Junior Member
48 posts Joined: Dec 2009
|
QUOTE(besheda @ Apr 25 2013, 08:50 AM) One thing I notice is that u guys must have forgot to uncheck Preloader,Dsp BL & so on as suggested in the guide. i actually purposely check everything because i tried to check ONLY recovery.img but it does not work as well.As thats the common cause for bricked. Anyway, upload the ROM already Download here - ROM finish downloaded your ROM, what are the steps to flash it properly into the bricked phone. This post has been edited by nse890514: Apr 25 2013, 02:23 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0383sec
 0.61
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 05:42 AM |
Quote