to gain superuser at this alcatel 4010x (easier method)
http://www.mgyun.com/
DO THIS AT UR OWN RISK

in my case i have did this twice in 2 sets
-root it in current using state or u in factory reseted state both fine
-installed pdanet for android 4.12
-installed alcatel one touch manager
-and the most important root tools->刷机大师

if u cant read chinese/no experince on rooting please refer picture i had uploaded
1st- download the root tool from this website http://www.mgyun.com/
[attachmentid=3415866]
then install it on ur computer

2nd- in the phone pls check/tick the USB DEBUGGING(always check this when u root any phone) under phone setting>application>development

3rd- launch 刷机大师 and connect ur phone
[attachmentid=3415877]
connecting...
[attachmentid=3415870]
this mean box showing current root status=NO(one click root)
so click the red boxed area

4th- confirmation before root>click the red area to confirm root the phone
[attachmentid=3415875]
ps:it tells process will reboot ur phone(of course u can click the cancel right beside if u will lose ur ball when the phone happen sudden reboot)

5th- checking and all bla bla bla rooting process (takes around a minutes in my 2nd gen core i7 )
[attachmentid=3415878]

6th- phone rooted when on the 2nd boot with around 10 usb plugin and out sound around 10times please check the status same as mine means ur phone are ROOTED
[attachmentid=3415879]

for UNROOTING factory reset not working , i used the ONE TOUCH UPGRADE S 2.7.5 to reflash stock rom

beside i have tested the recovery provided by this 刷机大师 software [attachmentid=3415885]
-factory reset
-backup(file store at /sdcard)(takes more than 5 mins)
-restore(choose a file named userdata_xxxxxx_xxxxx.backup)
so,i guess this is the noob proof guide i can provide,any problem on the tutorial pm me to change,goodluck

Hi All, i found 1 app that able to root alcatel 4010x glory 2s, this apps in chinese and this application is very2 easy as using binary root app. download this.

https://www.dropbox.com/s/f77twwjxhimocxv/i...aji_root_sj.exe

install and just press green button..

1st make sure installed Universal ADB driver if not it will not work..
2nd install this app
3rd enable usb debuging on phone and thick allow mock location.

run app and click GREEN Button shown ROOT, just leave it.. it will restart several times. wait until it finish it self done.

THANKS to the ishuaji.