YUM YUM !

Astro 2nd hand dalam RM 950 last aku check la.
AGA-T2 is one of the most hardest Genesis Tank to setup, Even me being considered somewhat of a pro between my friends and the vape community, will take about 30 mins to set it up.

I sincerely suggest you bring the device to a pro for setup.

My recommendations. 4-5 loops on a 30AWG wire kanthal. Fire your evic to about 8w-8.4w or 4v-4.2v. that should be the best for vape and taste.

to remove hotspots try moving those kanthal that are not lighting up.

uik terra... apa kata hang tolong setup AGA-T2 kawan kiter tuh...

hahahahah...

lots of ways.. but I would recommend to meet up to teach, would be easier that way...

anyway below is from my previous post:

celicaizpower, on 03 Jun 2013 - 4:33 PM, said:

    Here are some tips to re-coil Genesis tanks yang orang biasa buat salah.

    1. Mesh terlampau padat. (either bagi lubang kat tengah atau cuma wrap 3/4 dari lubang yang mesh tuh masuk), aku punya kiraan for mesh is normaly 7cm * 3.5cm.
    2. Kanthal terlampau ketat. (Kanthal kena longar, dia cuma patut just touch the mesh je dan bukan hug the mesh)
    3. Properly oxidise (burn) the mesh and kanthal.
    4. Distance + pole ngan mesh (kena rapat, sebenarnye kalau mesh touch the pole pun takpe, janji kanthal lain tak kena, kalau tak nak mesh kena pole, letak je washer dan pastikan kanthal pun kena washer all the way dari +pole sampai mesh)
    5. Kanthal Ribbon is the best to use for re-coiling Genesis. (no doubt wire pun boleh, tapi ribbon is the easiest)
    6. Only adjust the kanthal that is not lighting. those yang menyala means the current is running till there and then gets blocked. so adjust those that are blocked or not lighting.
    7. The lesser the loop the easier the setting. Go for 3-4 loops, it's the easiest. But if you are using Voltage variable device, go 5-6 loops so that the VV can detect and fire.
    8. When using VV to re-coil, set the voltage to 3.0 or 6.0 watts. When using a mech mod to recoil, use an almost flat battery.
    9. Mesh touch bottom tank. (make sure mesh tak touch bottol tank, this might cause shorting depending on the type of the tank)
    10. Bila dah semua kat atas dah ngam, fire and while firing adjust those yang tak menyala in short burst mode (not more than 3 seconds)
    11. Patience & Practise makes perfect.

    hope this helps you bro.

sape kat sini pkai novice mod by chris creations ? 

cite sikit ade pape problem tak ?

newbie here

i had two mods, k100 and ds but i sold both because i feel like.. meh

so, now, i consider to get VGT, malaysian mod

the contacts are all brass, not copper.. but the price are quite mahal (for me) RM290..

anyone knows about that mod?.. the performance and all lah..

My new toy, sentinel clone with dont know the dripper tank name.taste and the smoke awesome

very hard to change other ppl mind
ppl see got vapor coming out from ur mouth = smoking
n they will cover their nose, their mind will tell them it's smelly

some even said vape will have cancer, i lazy argue wif them

the worst part i ever met, a smoker cover his nose n walk further to other spot to smoke at smoking corner while i vape bside him

i malas nak layan
lazy explain la.. tats y i still no vape at public such as indoor restaurant or shopping mall
anyone of u vape at those place? got kena cock stare?

Maybe because your vapor production is huge so she was shocked. Haha 

Bro sekalian, i am interested to start vaping to stop smoking since i'm concerned about my gf getting all those second hand smoke. Thinking of getting something lean like maybe ego, izit okay?. Got any good seller to recommend?

tak..tp similiar ngan isap okok....cuma kurang sket possibility nak kena penyakit kronik....

tp kalau takdir kena cancer or tumor or apa saja lar penyakit level tunggu masa, x isap apa2 pun mati gak..

sedap kot
btw try pride clone not bad la dual coil asap kentot