QUOTE(benny888 @ May 18 2013, 02:08 PM)
Update to tweaks done on my Vega No 6
I have successfully installed CWM Recovery v 6.0.2.8 and have done a nandroid backup successfully too. Have been looking up several Chinese, Korean, Hardwarezone.sg websites for solution , tested several methods and finally found success from HERE
This is ONLY a temporary CWM as after reboot , phone will boot back to stock recovery. You need phone connected ( do select it first to be in MTP mode) to PC to execute this CWM Recovery. Once CWM booted up, you can disconnect phone from PC. This point was never mentioned at all.
[attachmentid=3445039]
Stock Recovery :
[attachmentid=3444655]
CWM Recovery :
[attachmentid=3444656]
Nandroid Backup in Process :
[attachmentid=3444657]
How to install ?
With phone switch on and with USB debugging selected, connect phone to PC
Just run the A860 CWM batch file ( extract the zip first ) - you should see phone connected and your phone ID display - type in "y" to select
Phone will boot to Fastboot mode and subsequently boot to CWM mode
With CWM installed , you can now easily root it too ( if your phone not rooted yet) with the Root zip file. Copy this file to internal memory or ext SDcard of phone. In recovery mode, just select "install zip from sdcard"
Download these files from my BOX:
CWM file : https://www.box.com/s/f5le8u8i5qhj073tgpe5
Root file : https://www.box.com/s/2479vkgcan3rewa1rcut
Phone USB drivers installation : https://www.box.com/s/5m8if8kntpzrz081l0im
Hi i have problem with my pantech vega no 6( IM-A860S ) already rooted, but after i update software from Vega officer site(VEGA Station), it reboot and always in CWM Recovery page, i reboot also stay in CWM Recovery mode, how?I have successfully installed CWM Recovery v 6.0.2.8 and have done a nandroid backup successfully too. Have been looking up several Chinese, Korean, Hardwarezone.sg websites for solution , tested several methods and finally found success from HERE
This is ONLY a temporary CWM as after reboot , phone will boot back to stock recovery. You need phone connected ( do select it first to be in MTP mode) to PC to execute this CWM Recovery. Once CWM booted up, you can disconnect phone from PC. This point was never mentioned at all.
[attachmentid=3445039]
Stock Recovery :
[attachmentid=3444655]
CWM Recovery :
[attachmentid=3444656]
Nandroid Backup in Process :
[attachmentid=3444657]
How to install ?
With phone switch on and with USB debugging selected, connect phone to PC
Just run the A860 CWM batch file ( extract the zip first ) - you should see phone connected and your phone ID display - type in "y" to select
Phone will boot to Fastboot mode and subsequently boot to CWM mode
With CWM installed , you can now easily root it too ( if your phone not rooted yet) with the Root zip file. Copy this file to internal memory or ext SDcard of phone. In recovery mode, just select "install zip from sdcard"
Download these files from my BOX:
CWM file : https://www.box.com/s/f5le8u8i5qhj073tgpe5
Root file : https://www.box.com/s/2479vkgcan3rewa1rcut
Phone USB drivers installation : https://www.box.com/s/5m8if8kntpzrz081l0im
This post has been edited by biz_malaysia: Jul 11 2013, 11:29 AM
Jul 11 2013, 11:09 AM

Quote
0.0256sec
0.90
7 queries
GZIP Disabled