Outline ·
[ Standard ] ·
Linear+
Overclocking n Hardisk Error?, need insight tq
|
TSa_yu_volution
|
 Apr 11 2006, 09:02 AM, updated 20y ago
|
|
hi guyz..im a noob...
ive started to oc my p4 2.6c recently...can onli reach 230 fsb stable 1:1...but once in a while i notice tat to boot into windows took like forever...its booting but really at a slowwww rate...then after i reset to default windows can boot normal...but CHKDSK identified got 8kb of bad sector...
the hardsik was perfect previously....and i lock agp/pci at 66/33....using asus p4p800x...4x256 hynix d43 value ram...
my question ..could oc causes tat bs to my hardisk>??
thx...
|
|
|
|
|
|
raymond5105
|
Apr 11 2006, 09:06 AM
|
|
|
You need to lock the AGP/PCI by putting fix in the bios rather than auto.If not the frequency of the AGP and PCI will be increasing as you put higher fsb and results unstable issues.The worst case is hdd cannot boot in windows or maybe will corrupt.
|
|
|
|
|
|
TSa_yu_volution
|
Apr 11 2006, 09:24 AM
|
|
|
QUOTE(a_yu_volution @ Apr 11 2006, 09:02 AM) the hardsik was perfect previously....and i lock agp/pci at 66/33....using asus p4p800x...4x256 hynix d43 value ram... thx... errr....i did mah.... |
|
|
|
|
|
xeratos_85
|
Apr 11 2006, 09:30 AM
|
|
|
overclock can damage hdd? i've oc my P4 2.4 --> 3.0GHZ and my hdd will crazy . got "keyak-ketak" sound and hang . but now after use defaut clock no more "ketak-ketak" sound . i think my 250gb damage already .  |
|
|
|
|
|
raymond5105
|
Apr 11 2006, 09:32 AM
|
|
|
Have to remember that the higher fsb is push,more latancy will be added on the ram.Another thing is your RAM is hynix D43 but which version?BT,DT or TCP verison?The best RAM of the Hynix family is the DT version.The BT version will be max out at 230Mhz normally and the TCP can go to 240Mhz.The DT version can go at least 250Mhz without any tweaking.
|
|
|
|
|
|
raymond5105
|
Apr 11 2006, 09:34 AM
|
|
|
QUOTE(xeratos_85 @ Apr 11 2006, 09:30 AM) overclock can damage hdd? i've oc my P4 2.4 --> 3.0GHZ and my hdd will crazy . got "keyak-ketak" sound and hang . but now after use defaut clock no more "ketak-ketak" sound . i think my 250gb damage already . You try to put back the origianal settings in your bios see this happens or not.I think that is not the hdd damage. |
|
|
|
|
|
low yat 82
|
Apr 11 2006, 10:36 AM
|
|
|
QUOTE(a_yu_volution @ Apr 11 2006, 09:24 AM) 66mhz locked is not so trustable.. put it at 67... hope this help... btw, ram timing also can caused hdd to damage.. go to technical thread at pinned section...  |
|
|
|
|
|
raymond5105
|
Apr 11 2006, 10:40 AM
|
|
|
QUOTE(jason18689 @ Apr 7 2006, 02:39 PM) lol.... carerra GT is VOTED the best car in NFSMW lehhh... QUOTE(low yat 82 @ Apr 11 2006, 10:36 AM) 66mhz locked is not so trustable.. put it at 67... hope this help... btw, ram timing also can caused hdd to damage.. go to technical thread at pinned section... Put at 67 and 33?Then it will function like normal?But normally people will locked it one is it? |
|
|
|
|
|
xeratos_85
|
Apr 11 2006, 10:40 AM
|
|
|
QUOTE(raymond5105 @ Apr 11 2006, 09:34 AM) You try to put back the origianal settings in your bios see this happens or not.I think that is not the hdd damage. as mention above , running at default clock my hdd ok already. |
|
|
|
|
|
low yat 82
|
Apr 11 2006, 10:44 AM
|
|
|
QUOTE(raymond5105 @ Apr 11 2006, 10:40 AM) Put at 67 and 33?Then it will function like normal?But normally people will locked it one is it? errmm... sort of.. coz cyclone87 long time stated that he tried to locked it at 66mhz, and found out it runs away... then he try 67mhz, it locked there.. btw, lockin at 67mhz also good for d gc... dun ask me y coz i dun how to explain it... |
|
|
|
|
|
antonio
|
Apr 11 2006, 10:52 AM
|
AMD Phenom II & Intel i7 Overclocker
|
I'm my experiance...even the powerfull Expert, SLI-DR, Fatality SLI, K8N (MSI & Gigabyte)...All should set PCIE/PCI or AGP/PCI manually...not to say do not ttrust the figures, but sometimes it is called 'preparation'.
|
|
|
|
|
|
TSa_yu_volution
|
Apr 11 2006, 12:04 PM
|
|
|
err my board can lock at 66.66/33.33 , 75.00/37.50, 80.00/40.00 oni....
i guess im out off option liao...btw its BT...so tats explain y my wall is 230....
This post has been edited by a_yu_volution: Apr 11 2006, 12:11 PM
|
|
|
|
|
Quote
0.0158sec
0.52
5 queries
GZIP Disabled