for my case, i lower down the HT frequency, raise a bit nf4 voltage... no need to raise the vcore.. then hit 300HTT, the current problem is temp reading which reached almost 50c during idling....
MSI K8N Neo3, mobo good to OC or not?
|
|
 Apr 24 2006, 02:05 PM
Return to original view | Post
#21
|
 
Senior Member
1,414 posts Joined: Jan 2003 From: 47300  
|
|
Quote|
|
|
|
|
Apr 26 2006, 04:15 AM
Return to original view | Post
#22
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
does this mobo lock the sata clock?
|
|
|
Apr 26 2006, 06:23 AM
Return to original view | Post
#23
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
Hi guys, i would like to share this modded bios file with those who r u using this exactly same mobo. I got this file from the MSI forum which modded by BOSSKILLER. The full picture can be cleared through here
I tried it out and it works for me...  File This post has been edited by swgiant: Apr 26 2006, 06:24 AM Attached File(s) 
neo3_183.zip ( 231.79k )
Number of downloads: 13 |
|
|
Apr 26 2006, 11:43 AM
Return to original view | Post
#24
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
yeah, like dfi one... suit for those who r using dDR500. i havent tested it yet as my ordered gskill ddr500 has not arrived yet...
|
|
|
Apr 27 2006, 11:09 PM
Return to original view | Post
#25
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
then what is your previous settings?
|
|
|
Apr 29 2006, 12:38 PM
Return to original view | Post
#26
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
i will show your about mine settings once received gskill 2gb ddr500 from the bulk of kingmaker_20
|
|
|
|
|
|
May 4 2006, 02:58 AM
Return to original view | Post
#27
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
but if you set 1:1, isnt the FSB speed is limited by the RAM? as RAM is unable to work as high as FSB...
|
|
|
May 4 2006, 10:18 PM
Return to original view | Post
#28
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
Hm, i hope my sempron can reach 320FSB, so far stick with 300FSB. Currently limited by my RAM as iam still using DDR 266 @ 153MHz...
|
|
|
Jun 21 2006, 08:51 AM
Return to original view | Post
#29
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
QUOTE(boban pantovic @ Jun 16 2006, 08:22 PM) Amazing mobo, wow, the latest bios do the trick on the speed? I oc my Sempron64 3000+ up to 2.6GHz (306x8.5) with latest bios, although I had to do it from Windows. ClockGen and A64Tweaker is all you need. memory (DDR400 2.5c): 3-8-8 tRC:8 tRFC:16 Max Async. Latency: 5ns Read Preamble time: 6ns Idle Cycle Limit: Enable tWTR: 3 tRTW: 2 freq 200Mhz tREF 200Mhz(15.6us) set HTT to 3x set CPU multiplier to 8.5 A64Tweaker Set freq to 166MHz and Apply Set tREF to 166mhz(15.6us) and Apply ClockGen Raise FSB 'til memory reach almost 200Mhz A64Tweaker Set freq to 133MHz and Apply Set tREF to 133mhz(15.6us) and Apply ClockGen Raise FSB 'til memory reach almost 200Mhz result:=2.6GHz   Arent those MSI bios programmers lock the bios and dun allows us to OC it? Are you sure you are using the latest BIOS @ v1.7?  |
|
|
Jun 23 2006, 08:32 AM
Return to original view | Post
#30
|
|
Senior Member
1,414 posts Joined: Jan 2003 From: 47300
|
remember to report back, if you tried it...
 |
| Change to: |  0.0188sec
 0.52
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 07:41 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.