zeone
GaGa uses 90amps alternator. Anytime u start the engine already full force charge the tiny 70 bat3.sound drag competition, novice level uses 100amp alternator, intermediate uses 120amp. Whereas experts uses 150amps. So, r u on sound drag? Ayam just chasing the perfectiÓn in an implausibru way

FLX. Garubenjamin, wanna exchange car for a week? Now I kinda understand that sg999 mentioned erictioh doesn't go well after 4krpm liao. It is quite noticeable in Gary's car that power band has been smoothen out. I felt that its not a losing power thing, its the smoothness makes 1 think it looses some sprint after the 4krpm region. Overall, well moded car. I rike it very much. Thank you Gary for lending me your ride. Great TT! Great company!

Your case very hard la, since you got the UFO kontol unit at your desbod, press the button to ECO gao dim. Anyway, when you have vacuum meter, that's another story, can cerita more on your car to you when you have that.

Already say it's for my Sawi lok. If u want next time I make another 1 for u la

C2KBAS2005
If it need, it should be already in the car Take a look at your voltmeter, don't you satisfy? If you still want to give it a try, can also geh, but don't put too much hope la.

Marhaihai
Oh! This 1 hor, like that geh. However, its not quite applicable lar. But then, it still serve another purpose, so I still think its a good idea. Anyway, I will suggest v12kompressor ar, kenjilew ar, r3apers they all so we all practice the same concept. Choi dai gat lai si next time need to trouble shoot that time, underneath engine bay immediately can see which 1 is this which 1 is that lor. Thank you for your input

I guess that's the only way they can make profit lo. My point is, last time when I bulk that time, cable quality, 300amp lug, 200amp lug, everything ady maxxed out to came to a concluded 19.40 costing, and that have not even include the rugi"ed" shrink wrap I topped up. So, if wanted to do something similar to my cable and selling for RM25, he's either another YAB or he's cigaoxin RM25 will never make profit if same quality as mine. I roughly guess la, other seller would have cut down to 3ft, by justify from the picture, the added casing suggested the insulation inside does not exceed 25mm², so most probably it's a 200amp cable or below. From the picture, it shows a 100amp NICKEL lug because the size of the lug and color is silver Plastic casing should be RM3/meter(around 3ft). From what I see, those are not shrink wrap, should be wire tape. So, my guess for their production cost is below:

3ft 200amp power cable = RM2.50 x 3 = RM7.50
Nickel lug = RM0.50 x 2 = RM1.00
Plastic casing = RM3
1 wire tape for many-many unit of cable = few cents?! Let's make it 10cent.

Total production cost = RM11.60. If selling for RM25, profit will be RM13.40, which is 53.6% margin, totally make sense

Btw, this guy


uses nickel coin to do welding


whilst most people thought it was a myth


May be that's why other seller said they're doing it on different basis. Their ultimate goal is to melt the lug on the connector

It was because, the lock hook and the door lock assy does not allign. Manual worker will have to sit inside the car, shut the door and adjust it from the inside, so the door will shut tight align with body. HOWEVER, usually they only remember the tighten this 1

Then,

This side forgot to tighten then straight away pasang the door trim

1) Alarm control unit got problem, need to replace
2) Esoba bengkok or spring mounting lari. Bengkok esoba need to replace, spring mounting lari boley kasi ejes baleks
3) Definte kenot start. Wuekekekekekekekekekekekeke but injin tak mau hidup or, tik tak tik tak starter talak jalan or, pusing kunji langsung talak bunyik. Veli subjective, like u go see doktor, bagitau doktor gua x sihat. Mana x sihat, entah semua saket

Oh! the interval sound not the 1 going through uneven road kena sound ar. then u r rite. brakeshoe pakei bosch, plobrem settled

Welcome. Added to proud owner list

Oh... I had both brake cylinders and brakeshoes changed



Long time no see. I tot recently u say wanna go yulek eat char koay teow? Ayam still waiting

You dont need a list. Your priority is 3MAX 4 point slut bar, coz turning in from the LRT Bdr Tasek Selatan U-turn already found your car late steering response compare to OUR cars. Then on the way back, we went WOT at the huge corner before KL exit, even with Matthew and Eqmal at the back, but the ass is shifting out. 3MAX 3 point rear seat brace. Last but not least, atleast a layer of sound proof on the hood la please. Summoning Mahihi.

dared

In marehsia magician term, "blek bong" is the commonly known term for brake cylinder pump. Even u send PoPi to SC service brake, they'll still refer it as "blek bong"

KIntos

Where got loctite in Plotong cars Blue ICI paint isn't it Or is it liquid paper correction fluid

It may, also depends on how you drive after you saw off the catcon. Anyway, please take back the Catcon and sell to me RM10 Ayam serious, tengkiup

Why you laugh? Your's wanna sell or not

p/s: You know why right? We still got puspakom need to go



My taxi hasn't Remember when you chop it off, bring it back from me. I want the 1 chopped off from your BLM, I don't want another Iswara/old saga catcon thrown in by the exhaust shop

This post has been edited by davidke20: Apr 7 2013, 02:53 PM

Can't brain why buying used catcon would imply of selling my car. Besides, I did mentioned my car still running with catcon. Actual reason is got a project car need to go for full puspakom inspection, which also require to pass emission test.

Another thing is, an efficient catcon will not jeopardise horse power by 5%. Don't see the need of removing anyway. If I get another unit for cheap, after puspakom inspection of project car, next its gonna go into my Shawie coz ady bocor.

I love catcon. It make the exhaust less smelly, it reduces emission of poisonous fume to the atmosphere.

Ma wasted all your mods lor Might as well this 1

Oh... dun wan original ar, other cars 1 can ar

Oh... interesting fact