can CLLI works as a surge protector?
I'm more worried about voltage surge in my hostel rather than being strike by lightning.

Hi lyn forumers, wanna add some credit to this seller.. he is a very nice and friendly seller, most importantly he explained and assisted me to choose the right product.. and prompt reply too Even for COD time and place he also try to match with me, really a recommended seller with good product..

But for those tv user with booster, u might wanna check out the compatibility.. bcos im having this problem.. but glk83 is still helping me out therefore, don't hesitate to purchase items from him

hiye there
i might need protection for this scenario, would appreciate advice

within a house, i want to isolate and protect just one room
within the room, there are pcs, and few electrical appliances
there is only two source of possible damage, one is the one and only wall socket (which is then splitted to 10 devices), and one LAN connection from a switch

is there a model that can secure both entry points?
thanks in advance

if both entry not located at the same place...

for the power source from wall socket... get MDSC0039 which support up to 10A (2000w), but afraid u will overload cal-lab units since u using 10 devices... so i may need ur help to calculate to total power comsumption come from wall socket...

for the lan connection, if only have 1 lan port going into ur switch, get SD-4C or MDSC0039 + SLAN1236 to protect the power and lan cable...

possible draw a floor map regarding the entry point and how u locate ur equipments within a room?

This post has been edited by gkl83: Jul 15 2007, 10:03 AM

thanks for your advice =D

actually, the area is just a room
but the switch, and modem is outside of the room far away
i just want to protect the room, hence, protect the the LAN cable that enters my pc, and the power that comes out of the socket

the appliances are all PC accessories, and phone chargers, nothing that draws too much power
both the LAN cable and power cables are in same proximity
would

whats the difference between getting the SD-4C or MDSC0039 + SLAN1236 setup? would getting the sperate setup be less effective than the combined setup? or are they the same?

thanks!

Thanks for smooth trading

both combination have the same protection...
the difference for SD-4D ( power + lan cable) and MDSC0039 ( power ) + SLAN1236 ( lan cable )...

if u expect for easy portable and better look... get SD-4C
if u expect for easier and cheaper replacement exchange cost... get MDSC0039 + SLAN1236 separately...

if ur lan module on SD-4C was damaged, u have to change whole unit even the power module still working...
if separately, only exchange the modules accordingly...

good seller, received SD-4C from TS

hi, need help....am looking to protect my modem n pc setup with cal lab products. what should i get?

Am looking to protect a simple pc setup configuration, with pc, modem and wireless router...all on one socket in the same room.

my wireless router got hit once...must be thru the telephone line...

thanks.

still recommended to protect the power as the same time to prevent back surge...

if just protect a simple pc setup as what u said, SF9812DSL will sufficient for u... it used to protect 1 set of PC, 1 unit of modem and 1 unit of wireless router if u have any within a small area/room...

Does the SF9812DSL affect my broadband speed? Am quite a heavy user...

was thinking maybe a simple SP9201DAF/DSL (not sure wats the diff) would do. Already have an old Adaport surge protector for the power.

wont effected broadband connection speed... none of LYN forumer complaint after used cal-lab except wrong installation...

SP9201DAF same with ADSL splitter filter... it able to protect analog telephone and digital broadband at the same time
SP9201DSL only protect digital broadband for modem only...

cal-lab not recommended to protect tel line for ur PC setup only, and unsure how effective is ur old adaport surge protector... if u insist to protect tel line only, u have to bear the risk yourself since the surge may come from power line although ur tel line protected by cal-lab...

i had a LYN forumer insisted to protect tel line only and i mentioned bear the risk himself although i recommended him the correct model and correct installation... result: his modem burnt after few months...

so far, none complain from LYN forumers who using recommended models, correct installation and correct equipments, except 1 of them done the wrong installation after investigated by cal-lab staff which his installation caused back kick...

Do you have a basic one for internet that doesn't slow down or deteriorate the streamyx signal?

sure will have some dropping on broadband but not significant, around 1-2%...
more devices/components, more Ohm...

here my latest speedtest... using 512 streamyx...
broadband signal filter by 2 models - SF9512DSL (RJ11 cable) and SLAN1236 (RJ45 cable)


if u just intend to protect simple pc setup... i recommended SF9812DSL and get a SKPXDSL for spare module purpose

Hi fren, i am facing a lightning problem here, my modem always get hit by ligtning. So i would like to ask you about your product here. From so many product you sell here. I really dnt know how to measure the differential between them.

Can you futher explain to me? What i need here is it can protect both of my pc equipment, normally i plug my pc socket into one wall socket only and my modem direct to the telekom socket. It danger my modem, everything get hit by lightning. I have thrown 3 modems recently, one power supply. It caused me a lot of trouble here.

So what i really mean here is i need this lightning protect to be pluged into wall socket and i plug my pc socket into lightning protect socket. At the same time i can plug my telephone line into lightning protect data socket and link to modem. IF can, i also hope it can protect my telephone too when i talk on telephone. Most important is it can secure my pc and modem, secondary is telephone IF can. Preferable fuses system product. Coz i can replace it easily.


Do you think S9812 (DSL module ) is suitable for me??

The most important thing is, any fuses inside this lightning protect product??? do 3 pin or 2pin and telephone socket have its own separate fuses??

As my knowledge fuis will furnish when lightning hit it, and it will stop further damage to my pc and modem. After that i still can replace with new fuses inside? sory ,my english not very good, if no understand , please ask me. I hope you can answer me quick, its urgent.

Correct me if wrong?

1. SF9512, Protect:PT(modem) - Two side?? 2 telephone socket, one power socket?

2. SF9512DSL - Two side?? One 3 pin socket, 2 telephone socket???

3. SF9512DSL-MS2+3 - Two side? one side with 3 + 2 leg socket, other side with 2 + 3 leg socket, 2 telephone socket.


4. SF9812 (+SKPX DSL module) - Is it support ADSL modem? any further explain on this?

5. SF9812 (+SKPX Digital module - Digital for ??

6. SD9623, Protect:PTT - i see SF9512 and SD9623 pic is the same? both have one socket, 2 data line socket, duno what different??

This post has been edited by kingsthii: Jul 24 2007, 01:19 AM

bro, I am wondering whether getting another SF9812DSL will protect my system even better. Dual SF9812DSL.. Hehe

allow me to make your scenarios in simple ways
1. want to protect 1 unit of modem and 1 set of pc
2. want to protect analog telephone as well
3. dont have other PCs or other networking devices connecting to your modem and your PC
4. all the equipments (telephone, modem and PC) located at the same room and areas

in order to fulfill ur requirements, MDSC0039 + SP9201DAF is ur choices
MDSC0039 protect power line which used to feed your PC and modem
SP9201DAF act as ADSL splitter filter, it split the telekom line into analog signal (telephone) and digital signal (modem)

SF9812DSL with SKPX (fuse) module but unlucky tat it used to protect digital signal only which splitted by ordinary ADSL splitter filter... it cannot used to protect analog telephone... otherwise broadband signal quality will be decrease and telephone may not protected bcos SF9812DSL designed to protect digital signal interface...

all of the cal-lab products doesnt come with replaceable fuse, it wont work well... it used to BURNT while overvoltage, it not used to detect or isolate or arrest the surge...

SF9512 (Digital + Analog interface) used for dial up modem, fax machine and 512 streamyx
SF9512DSL (Digital interface only) used for higher speed of broadband
both of them come with 1 @ 3pin power socket and telephone module

SF9512DSL MS2+3 is a multi socket of SF9512DSL
it have 2 @ 3pin and 3 @ 2pin power socket and telephone module for broadband

SF9812DSL basically same with SF9512DSL, difference is SF9512DSL doesnt come with SKPX (fuse) module for telephone line

SF9812 (digital) same with SF9512, protect dial up modem, fax machine and 512 streamyx

SD9623 used for unique equipments which used 4 pins of the telephone line, such as ISDN connection
normal telephone and broadband used 2 pins (pin2 and pin3) only of telephone line
the protection level will same with SF9512 and SF9812, used to protect dial up modem, fax machine and 512 streamyx


1 unit of cal-lab product will sufficient for ur PC equipments loh...
u can try with "Dual Protection" if u not confident on the cal-lab products yet... but i cant confirm hows the broadband signal quality since tel line filtered by 2 units of cal-lab... i tested with 9512 + 9812, my modem cant detect streamyx signal...
but i using SF9512DSL (protect power, tel line) + SLAN1236 (protect lan cable), my torrent speed still able to reach 50kb+/s with my 512 streamyx... below is my connection speed with both models...

wat is mean protect digital signal?? Digital signal for modem OR telephone??


So, SF9812 (+SKPX DSL module), have fuses?? can protect PC, Modem (without speed down), telephone?

OR

SF9812 (+SKPX Digital module), have fuses?? can protect PC, Modem (without speed down), telephone?


i dnt get wat is Digital module and DSL module.



if i only use to protect modem and pc ONLY, can use which one this ?


i got one ADSL spliter black which can plug in telephone and modem line together in it.

This post has been edited by kingsthii: Jul 24 2007, 08:19 PM

DSL version only used to protect modem, not for telephone...

u can use SF9812DSL for ur modem and PC set... but not recommended to locate ur telephone beside ur modem and PC... otherwise will cause the back kick, the surge may pass thru the telephone and the surge able "jump" into ur modem and PC set, lastly ur equipments still will damaged, although ur modem and PC protected by cal-lab at the front end...

This post has been edited by gkl83: Jul 24 2007, 08:20 PM