Kindly quote me the best prices for
1. SP9201-daf
2. STV9511-MS1+3

To Kuching, Sarawak.

no longer have STV9511 MS1+3...
or u can get STV9511 or SFTV9622FC MS2+3 instead?

ok quote me both, and 9622-FC

Also, this Promo AV, i see it has 2 faceplates? Are they connected with cables? Any alternative pic to better show it?

Thanks.

This post has been edited by fx20: Aug 24 2013, 01:00 PM

AV pack is "double sided"
meaning connect the power socket from left and right instead... as usual power socket design is connect from top only...

PM me pricing pls + shipping.

481. vandoren - 3*SF9812DSL, STV9511 (PosLaju, Sent 04/06/13, Received 05/06/13)

Hi TS,

One of my SF9812DSL seems to be faulty, which the phone line are not working (the power outlet side works fine). Wanna ask;

1. How do I check for lightning strike or voltage surge? It doesn't seem to have strong smell or burn marks.

2. How can I get service for repair/replacement? I saw that Perak area have Cal-Lab Associates, is it possible to go there for repair/service?

3. Can I get the module(SKPS-DSL CUSTOMIZED) and DIY it myself?

This post has been edited by vandoren: Aug 29 2013, 09:56 PM

1. try to get a normal telephone plug onto SF9812DSL and heard whether is normal dial tone...
if dont have dial tone or buzz noise only, confirmed is damaged by lightning...

2. All resellers doesn't provide repair / restoration, only Cal-Lab HQ are the dedicated center for repair and restoration...
you can email to callabkl@gmail.com and callabhq@gmail.com for the process of restoration and payment method...
Please do inform them that is SKPXDSL module...

3. Yes, you can buy additional unit for spare / standby purpose for in case the failure of existing SKPXDSL...

Hi Gan,

Between SD-4C and SD-8C, I'm using it for Unifi's IPTV (running on the LAN cable).. not sure which one I need.

Does SD-4C only protects 4 wires or all 8 wires of the LAN cable?

Hi

Do you have powerline-ace? If yes how much is it? Thanks.

Cal-Lab do have the models for powerline-ace such as Aztech Homeplug...
I will get back to you soonest with the models and pricing...

Hi, I would like to order 2 unit of SKPX-DSL-customized, deliver to Ipoh.
May I know how much?

Same here, please PM for the "Powerline-ace" price as well. And do u have any recommendation to protect LED TV for surge protection, which model should i used?

for standard AV protection, you can use SFTV9622FC as recommended to protect power, aerial antenna, satelite dish and analog telephone...

as Powerline ace model, here the RRP price and discount will be provided later...
TRM-NIF-3-BU : RM108 (Base Unit to Power-source w/o bottom or top connectors)
TRM-NIF-3+PE : RM128 (BU+Power +Earth connectors on top)

Hi Gan,

We spoke on the phone, I'm Adon Hsu from Sarawak, need your expert advise on the SKPX module suitable for our PABX setup. Apologies if this is not within your area of expertise.

According to this:
http://www.cal-lab.com/downloads/09-How%20...20Equipment.pdf

There are three types of SKPX module:
1.SKPX-M(AR) = for analog PSTN line only
2.SKPX-D = Digital-Analog version for slow-DSL / ISDN or Analog + Caller ID
3.SKPX-DSL = For DSL only

Our office is using E1 ISDN PRI (2 pairs of copper wire) + Streamyx 8mbps (2 pairs of copper wire).

From my limited knowledge, I would say I need:
1. SKPX-D for my E1 ISDN PRI
2. SKPX-DSL for Streamyx 8Mbps

Can you help me verify? If not too troublesome.

bro STV9511 MS1+3 got stock? tq

STV9511 MS1+3 no longer in production... otherwise maybe consider for SFTV9622FC MS2+3?

owh that model also protect tel-line & astro dish rite? best price? TQ

Hi...
U dont hv only 4x3pins without the 2pins?

SLMS4 is the choices...

Sorry...which one is this? Cant find it in yur catalogue.