Modding is personal wan lar, I personally chose black cause clean n simple. Don't like all the fancy colors.

After finishing your mod, i can summore look at yours n learn new things.

Cheers

Hahaha i was just joking lar... at least when i look at other modders' black internal i have a rough image of how mine's gonna look as well and can make early changes if something comes to mind. Good luck with ur mod, hope to learn how to put the rivets back from ur worklog

Hello, thread starter, can i know do u modding this i cute casing ?

Yes...
Yes he did...

Why bro?
Interested on modding you're pc?

Go send to the god of case modding: IANHO...

He'll turn a beast to a beauty...

if me i dun wan my pc to be pretty...wan the ganas ganas 1...like IANHO's king kong

LOL i also want LIKE IANHO's King Kong 1...esspeacially the CARD

Wooooooooooooooooo..................... Almost finish, will upload pics tonight.

Finally.......

I will describe all the parts that i have modded.

Cut a blow hole from 8cm to 12cm

Another view after installing the fan.


Same for the back of the casing. 8cm-12cm


DIY round IDE cable


Spray paint the casing black internally and externally.
Look at the mirror shine. (See the reflection)


More to come.

Just one suggestion why dont u have the whole case fan area cut out

grab a piece of acrylic and cut the 12cm fan hole

Screw the acrylic back to the case with nut and bolt or rivert it ....

make sure to paint the acrylic black or just get a one in black color....

Applicable to both front and back blowhole ......it would make ur mod to perfection ....

the horror!!! the horror!!!!!!!!!

dude.. .the IDE cables is really bad la wei... dun use electrical tape man... either use proper sleeves/tube, get proper rounded ide cables, or fold them.

other than that... looking good so far.

EDIT: n i agree with Doom. that would cover up the leftover holes... at least no cockroach or cicak can enter ur case

This post has been edited by mADmAN: Sep 26 2006, 01:12 PM

Thanks guys. I know the ide cable is not prefect. Was in a rush, Going to take out the electrical tape n use cable tie to tie up the tubing.

For the Blow hole, have to wait lar. No time now liao.

This post has been edited by zzzz52: Sep 26 2006, 02:17 PM

Front Bezel. Took out the old arcylic n redo a new one. Change the Power LED to blue color. Polished the front plastic frame to mirror shine.

Nice arr the blue effect
somemore the second bay i mount the UV CCFL controller into it.



Slap a arcylic on the bottom to have a shining effect n hide the cables below.
Also install a uv CCFL at the bottom.


Modded the PSU with a window, redo the wiring to have a modular effect n install 2 blue LED inside. But 1 of the LED is dim, going to change it. Also painted the PSU black.
As you can see one of the connectors is opened.




Install the UV CCFL in the casing.
I have also cut 2 pcs of angle aluminium to run my wires along it.
All wires r also extended to reach the neccessary places.

Extended the GC power cables.(Haven't sleeved the section to the floppy. Shorting problem with the floppy drive)

A close up.


This post has been edited by zzzz52: Sep 26 2006, 09:19 PM

Redo the side panel. Spray n polish to mirror shine. Added 2 bolt to attach the arcylic.


Messy cables. Have to tidy it up


An overall view of the casing.

Some final finishing work will be done.

1. Touch up
2. Change LED in PSU
3. Sleeve remaining wires.
4. tidy up wires behind the drive cage
5. cleaning n polishing.
6. Front fixture for fan controller.

Will post up the final pics when all r finish.

This post has been edited by zzzz52: Sep 26 2006, 09:18 PM

wow not bad this your first time ???

where you get the tools ??? you bought them ???

i got one cacat casing now as well planning to mod it but not sure whether want to invest in the tools or not

u should take a look at the first page of the thread and see what it was like BEFORE this mod.

@zzzz52
bro...interested in ur PSU mod la... can give more details on the modular thingy? especially the connectors u used... been looking for those but cant find it anywhere near me.

EDIT: if its not too much trouble mebbe can take pix of the internals and external as well?? if u do then thanks... but if u dont...its okie... i understand





This post has been edited by mADmAN: Sep 26 2006, 07:11 PM

Wow It Looks Nice i like ur front panel

I also used a rotary tool.

What internal n external do you mean??

The connectors i think easy to find lar. I bought it at a electronics components shop. I took a sample to them n they somemore ask me wan 2,3 or 4 pins. I bought 4 pins one. It's also quite cheap, i think it was RM5 for a pair (male n female).

Thanks

any idea what the connector is called? and wanna see how u did the internals for the connector of ur PSU.. but like i said la..if its too much trouble then its ok...

Just curious why dont u have ur sleeve color change to red ... it would match the color of the PCB board for both mobo and gc.....

since u visited the eletronic shop... i would recommend u to grab some molex connector for custom cable for ur HDD that is kind of a lot there....

u could custom the length so that it has least exessive cable... it make it cleaner .....

further more with the zip tie base u could have some wires stay close to the case rather than hanging around ....

just suggestion only ....