2day going to do my spray project lol.

Yah on my gaga, hope it look nice. But worry raining. Coz getting darker.

Quite confem today, after yesterday night took out the "accidental ground cable", I can notice the throttle lag is obvious again. The subwoofer is "burping" again, as aircon kicks in, RPM will drop until the car felt like shutting off Next project is definitely Ground Cable!!! I knew some will say its not related, I oso can't explain it as previously ayam as well disbelief GC & VS will effect engine performance. Ayam impressed by the butt dyno and willing to let people call me an ignorant, but I know what I want for my butt.

Aiya, a bit cacat tim. Sum kena a bit black paint. I thinksanding tht time make the tape loose.

Ok Ok! Here's the detail It was a super silly mistake. I was wondering how does it look like if I hook up LEDs on the hood, so I used my jump start cable directly connect from battery, pull the jump start cable all the way to the hinge, use duct tape hang both cables(+ve & -ve), and the cable clamps on the super bright LED H3 bulbs. After the soft test run, immediately I unhook the positive cable, meanwhile I clamp the negative cable on the lifter hook(near by purge valve on AFM, got 1 engine hook for lifting up engine), plan to keep my positive cable first only come back and clear up the mess. Mana tau, kept the positive cable, come back immediately forgot the negative cable and busy pulling off duct tapes After that been left the cable clamp on the engine hook whole day until night time

hi bro zeone,
saw your post here
http://forum.lowyat.net/index.php?showtopi...&#entry45196469
and are you still using that OEM ABL module??
or you already change it to proton ABL module (which some forummer here say that we can unlock our door using the reset button)??
because my newly bought 2nd hand car seems like the previous owner already install it(auto brake lock)..
but i couldn't found it on the boot...

here is a pic (sorry..take it last night..so it wasn't so clear  )

there's one black box and the product number is PW856127 (i assume this was the alarm right??)

and to my knowledge the B-Line for BLM 1st edition(without signal on the fender) doesn't include a reverse sensor also right??
but mine have...
so my conlusion maybe the previous owner install another alarm module which feature a auto brake lock and reverse sensor...
which i found it on the driver side door panel...but i'm not really sure what it is

so the MAIN question is...where can i buy this "original" proton ABL module
and are the "original" proton reverse sensor include in the proton "original" alarm???
or it is what i can see from your picture...seems like there were 2 black box in there...
while mine only have i black box(PW856127)

Jump start cables are damn thick like 400A capacity?

You can go Eneos or Tesco, cheap ones are 300A, slightly better ones are 400A.

Home electrical voltage is 240V, the P=IR yields you similar wattage despite car jumper wires has 300A capability.

12V x 300A = 3600W
240V x 13A = 3120W

And home electrical cables take long term load, like 24/7 for years. Car jumper cables are intended for temporary use only.

guys my rim scratched pavement!! ahhhhh. can just buy those silver spray n it will be ok ka? =S

Juz minor 3 line only. 2 like hairline and 1 slightly fat. But the outcome not bad. If really got a lot time will respray whole bumper but need to find the color as close to our stock white.

door panel？ the side mirror cover can pull out one，door handle，try kasi senget sikit

here is the picture, but still not perfect yet~!

give sum comment, so i can improve it    ... btw already skip one procedure...

Does anyone still has the link to the seller in Cari forum who sells door rubber strips? The one that unker David used to troll other Saga owners at car wash...

10q.

Helo to zeone and coolkwc,obd arrived but juz now went to two poslaju branches,dun have the rm6 plastic bag,lol...i tomolo oni send la har,haha...paiseh

do we have like filter at the front grill to filter the dust? if not, why bother seal the gap? maybe can improve airflow to the intake?

Last month i go service my car at sc, .................then i ask about the rubber seal, sa check our cars chassis number say both our car is not in the list, then i ask, not all FLX can have it meh? because latest batch FLXs got rubber seal as standard, but at last he paste for us FOC and just ask us to sign the receipt. So i dunno is it all older FLX can have it FOC or only some older FLX in the list?

@zeone
do you want the timer ignition key? I am currently at proton edar and gonna get myself one unit, but need to wait a week for the parts to come.