zeone
mengsuan

Seriusly, I don't really care huat is in the cable. I know welding cable is 300a onwards, and the kedai logam tauke did suggested to use those welding cable to make jump start cable. However, the jump start cable that I accidentally grounded was cap ayam RM9.90

I, most probably is gonna get the 500a welding cable & stuff it on my engine hook Trouble is, the lug will be too huge, need to find a way to tie it up

why not coated engine rocker cover? like this: http://forum.lowyat.net/topic/2387929/all 

mengsuan
Plan to use hammer :notsure:

kenjilew
Gimme time

r3apers
Matt black is consider SOLID paint category. Applying clearcoat BEFORE matt black wld mean easy to chip off when hitting sand stone, unless u use corse ground sanding before applying matt black. Let's just say the matt black bond very well with your clear coat, does not mean the clear coat wouldn't fall off. Korek way to effectively apply mat black is, wet sand the original surface thoroughly, make sure its very clean. Apply SEVERAL thin layer of matt black to ensure its thick enough & bond well.otherwise a month or 2 later u will be squating down patching white dots with marker pen liao

v12k
Yes korek. Too long I even more worried, later tiao taio feng.

r3apers
Tats why I said ROUGH ESTIMATION. I will work around my budget, eyeing between 200-500amps cable as long as within budget. However, if all that doesn't work out, might as well buy another set of jump start cable, split with kenjilew we take 1 cable each Got clamp sumore

r3apers

Merz TT, seriusly considering. CNY around the konar liao

oic... coz later wana go EA after waxing~!

talking about carwash, anyone here using optimum no rinse.

thinking of getting that, to prevent heavy swirl mark on the car. I am living in flat, no facility to wash car. is it real just can use 1 bucket of water can wash the whole car? no need to rinse first with water like the normal carwash do?

http://forum.lowyat.net/topic/1720414/all

Rm88 for 32 car wash. less than Rm3 for a car wash, tempting

Currently using ONR. Can get from Muyo or Seech. Master KC is sibeh busy one. 

dang.anyone arranging for bulk? 
will not send car to be scratch by car wash anymore then.

Selling away > Used around 5000KM Works drop in filter for RM80. For Saga BLM year 2008 onwards. Thank you

why so senyap

Guyz need help here !

Where can i repair and cover it on Pj area and will cost how much ?

attached the pic http://img145.imageshack.us/img145/5639/20130129091739.jpg

Puteh-puteh go USJ 1 round to find out not enuf magician tibai 70km mileage claim from hu? 10 bucks yo

Yap. spoiler holez

solution 5 : use kenji's finger to cover the hole.

What kind of nut to cover up  = =?  The car wont kena cancer ? ( Rust )

Imagine someone's severed gugujiao sticking out like that.

Wohoo!!! Keyring light delay timer module bulk closed

1) Mingwei
2) Zeone
3) Davidke20

no need DIY liao. Smell burnt resister dunno smell how many times ady

aih... Huat happened to me. Kenji FML too much liao ar. Shawie haven't repair, now BLM oso sicked liao. In clinic now

maybe this one can help u...lolz   


our car start engine already loud, so apa mcm?

Dont understand, FLX+ has 2 airbags get 3 stars, FLX standard gets 1 star. So FLX exec gets what?
Itu ranjiao myvi A pillar deformed mcm ni pun pass ah?

kenji style...