haha if the sata data cable one can make it shorter arr ? i mean i just wanna short one..

Nope, I dont think you can cut the cable & make it short.

Definitely not. lol. You need a short SATA data cable to begin with.

owh k k like that one ha

edited

This post has been edited by infernoaswen: Dec 31 2013, 02:37 AM

edited

This post has been edited by infernoaswen: Dec 31 2013, 02:38 AM

11 fans for about 800 is not too bad ok. Try about 3xx for 3 fans.

its still expensive m'kay

Hahaha. Yes. Definitely. By worth it

Did some wiring on the fan cables & seems like 22awg wire is just nice for crimping. Will be restocking 24awg wires as well soon because for making fan spliter, 22awg is a little too thick. The most is you can cramp two wires into 1 pin therefore if you plan to split single 3pin to 3x3pin that might not be possible.



Had some idea with red leds, credit goes to keir though since I saw him doing it for his mod & decided to copy it to mine hahaha iirc he used acrylic to give the nice underglow effect but I am not that OCD & this is my own personal build so decided to go with plain led.



solder the wires to the led as usual





It gives a nice red underglow effect eh? Pretty sweet, although using acrylic would be better but lazy la. Need to make custom acrylic, glue it, measure, fit it etc...



It even lit up the rog red line section & nope I didnt power up the board yet


This post has been edited by infernoaswen: Dec 31 2013, 02:36 AM

Just a few shots on the current progress. My gpu is back from RMA already, will be getting some thermal pads on monday from HoNeYdEwBoY & my loop should be up by night All I need now is lamptron cw611 & the build will be done I guess, just some minor touch up here & there like the fan sticker etc. Hopefully will be ready before 4th October & I am sure you all know whats on 4th october right?









Not much modding today, just adding up the red led so made some custom wires for my customer & a psu jumper for me to test the leds. Oh & I also will need to get 2 corsair force gs ssd for this build. Will be modding the SSD too




This post has been edited by infernoaswen: Dec 31 2013, 02:35 AM

Bro are you using stok tube ?
btw nice rig setup

stok tube? I am using primochill advanced lrt tubing

owh nice :3 sorry im newbie

haha no problem we all start as a newbie anyways

Plan to change the tubing to acrylic tubes maybe next year during the next maintenance

Just got myself SSD, will be modding these soon. Just found out the dvd rom is not working due to loose contact with the sata power cables. I guess my method of pushing the wire into the EZ crimp connector is wrong Will need to redo the sata cables & also the hdd part.



This post has been edited by infernoaswen: Dec 31 2013, 02:34 AM

Just saw this rig in facebook today. Seems like the red led at the mesh looks pretty cool so I might be copying the idea

Actually I did think of inserting leds in the mesh area but didnt really go for it because the red leds that I have is pretty bright so I am afraid it might not turn out that good. I think I might have a solution for that though, going to sleeve the leds to reduce the brightness if its too bright



This post has been edited by infernoaswen: Sep 29 2013, 01:31 PM

How about put some resistor?

I could do that too

Nothing major, just got myself a lamptron cw611 today. Going to be busy for this few weeks since lots of deadline to meet so wont be doing any modding anytime soon



This post has been edited by infernoaswen: Dec 31 2013, 02:34 AM