Thanks for your reply. The whaferdale has a sensitivity of 86db and is a 6ohm speaker. My rotel ra-06 Amp only has 70w/channel, it is good enough to drive my Dali lektor 6 floor stander which has a sensitivity of 90.5db, but not for the whaferdale. My question is have u personally tested the tp-60 with a 6ohm / 86db speaker? Thanks.
We have not personally tested it for 6ohm / 86db speaker, but would you be interested to try it out at our store 1st...Thanks
Can you tell me if it's compatible with raspberry Pi ? If it support HardMix, meaning the ability to modify volume from the software (not the volume button).
Hi, sorry to inform you that we were unable to answer your question. However I will send this to the manufacturer and hope they will feedback to us asap. Thanks.
Received TP22 last week, direct order via his website. Got to say the amp is good, able to drive my KEF Q300 and same loud sound with volume set at 12 o'clock to my Yamaha 100w x2 integrated amp which volume set at 9 o'clock. I also used it on my Hifiman HE500 via speaker taps.
Thanks bro, glad to know that you enjoy the amp and it is good to drive your KEF Q300.
Received the tp-32 today, but no USB DAC cable in the box?
Dear Ed,
The manufacturer has just started to include an usb cable for their products delivered in end of 2013 only. Therefore some of the stock does not have an usb cable included. Do hope you understand that. Thanks
Because you was stated the cable included in thread ? right?
Dear Ed,
Can you indicate to us where did mentioned that usb cable is included for the tp32. If yes, we will honoured what we have stated. We cannot remember that we mentioned that usb cable is included in our thread. We are supplying the product as per the manufacturer delivered to us. Up till this point, the manufacturer only supply tp30 with usb cable to us. Thanks
can tp-60 drive paradigm monitor 7 v6 floorstand speaker well?
thinking of getting one
For your Speaker : Amplifier Power Range 15 – 180 watts Maximum Input Power 130 watts Impedance Compatible with 8 ohms
For TP-60: Output Power 2 x 80W @ 4ohm, 2 x 50W @ 8ohm
It will be able to drive your speaker based on the specification. Would you like us to reserve 1 unit under your name as stock for tp60 is running low. Thanks.
Dear seller guys do you have tp60 in stock ? Thinking of biamping with toppings
FYI readers,
Topping tp60 need 5vpp or 1.767vrms of line input to achieve that tube like sound nirvana stuff ( iphone/ipad only 1.0 ~ 1.2vrms ) . Either do a " Lampizator snip-it " on your source or go buy a Guanzo 6N3 tube preamp ( this one is better than the 3 tubes version, marantz 7 clone and little dot mark2 preamp ) or you can do both to reach that super high end transparency, tube like palpable presence, extra wide sound stage, nice smooth solid midrange and the most natural sounding amplifier comparable to ones costing upward of 10K, I sh!t you not.
anu.
Hi, Thanks for the great info. We would really like to try out the configuration you mentioned.
We still have stock for tp-60 at this moment however stock is running low. Would you like us to reserve 1 unit under your name. Please do let us know. Thanks
I have a bose companion 5 speaker, will these things work on my speaker? and if yes then which one work best for my speaker?
Hi, the bose companion 5 is a powered speaker system. Therefore you won't need any high power amp to drive it. But you can consider TP-30 or TP-32 to enjoy it excellent USB-DAC conversion compare to normal onboard music card.
Hi there! Still selling? I'm going to build a pair of MLTL 2-inch speakers and I need an amp. The TP-30 will do. It's for nearfield listening anyway.
Hi, we are still selling, but TP-30 is out of stock at this moment. We only have a demo unit for TP-32 at this moment which we are selling at RM330 including free postage within peninsular malaysia. This is the last unit please do let us know if you are interested. Thank you.
Sep 2 2013, 11:48 PM
Quote
0.0275sec
1.06
7 queries
GZIP Disabled