I got a similar setup celeron d 2.4G and p4p800 dlx. my celly is running at 3.15G default voltage (175 mhz, DDR350). I can't get it above that no matter what voltage i pump in. what's the problem? someone plz help..
p4p800-x cold boot problem
|
|
 Mar 24 2006, 12:07 AM
Return to original view | Post
#1
|
 
Senior Member
1,075 posts Joined: Jan 2003 From: Dusk till Dawn  
|
borrow thread
I got a similar setup celeron d 2.4G and p4p800 dlx. my celly is running at 3.15G default voltage (175 mhz, DDR350). I can't get it above that no matter what voltage i pump in. what's the problem? someone plz help.. |
Quote|
|
|
|
|
Mar 24 2006, 07:34 PM
Return to original view | Post
#2
|
|
Senior Member
1,075 posts Joined: Jan 2003 From: Dusk till Dawn
|
it's actually 1:1 already - RAM at DDR350 only
|
|
|
Mar 24 2006, 07:56 PM
Return to original view | Post
#3
|
|
Senior Member
1,075 posts Joined: Jan 2003 From: Dusk till Dawn
|
pretty basic
Celeron D 320 (2.4Ghz) Asus P4P800 Deluxe 2x512MB Twinmos SP (UTT CH-5) - does 2-2-2-11@240Mhz@3.3V on my old nf2 board Antec 480W SLK947U + 92mm Delta |
|
|
Mar 24 2006, 11:14 PM
Return to original view | Post
#4
|
|
Senior Member
1,075 posts Joined: Jan 2003 From: Dusk till Dawn
|
yeah, only 2.85V. i know the Ch-5 requires a lot of voltage. but this is just DDR350 at SPD timings and it still wouldn't budge from 175Mhz. in fact i can even run on the most aggresive timings with turbo mode at DDR350. but at fsb 180mhz (ram at DDR360 SPD), the system won't even post.
|
| Change to: |  0.0152sec
 0.57
 6 queries
 GZIP Disabled
Time is now: 30th November 2025 - 07:45 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.