If you don't want to get the ac68u now, then wait for this model

http://forums.smallnetbuilder.com/showthread.php?t=18697

AC3200 doesn't stand up as well and only 3x3 streams. I want a 4x4 streams RT-AC87U that can stand up..haha.

http://pcdiy.asus.com/2014/01/rt-ac87u-the...-mimo-ces-2014/

oops, i updated it by clicking on the link after i logged in to the router settings page...hope it works as well.

ASUSmy
My router rt-n16 is almost 2.5 years old. Can still claim warranty if broken? Go back to the shop or Asus service center to do claim?

Thanks

This post has been edited by yoonlim: Oct 11 2014, 12:14 AM

hmm, actually right,why do you even want 4x4 stream? as far as I know there are no wireless client which even supports it? even 3x3 is rare

honest question here

What's wrong with your RT-N16?
Is it dead or bricked?

power on no light.

Have you tried with a different AC adapter?
Find an AC adapter that comes with the same polarity, same tip size, same voltage but with the same or higher AMP.
Do not use an AC adapter with a lower AMP.

Example:
The original AC adapter comes with 12V & 1.25AMP
Using an AC adapter that comes with 12V & 2AMP is fine.

If you have the older HyppTV that looks like in the picture below, you can use the AC adapter from that.



If your router still doesn't work even after using a different AC adapter, then that means your router is dead.
And since the warranty for your RT-N16 is already over (RT-N16 warranty is only 2 years), you can open the casing & check all the capacitors, see if they are bulging.
If any of the capacitor(s) is bulging, then all you need is to replace the bulging capacitor(s).

lex can help you replace the bulging capacitor(s). At a cost offcourse.
In fact, he can help you replace the capacitors with a higher quality so your RT-N16 will stay alive a lot longer.

This post has been edited by sHawTY: Oct 11 2014, 12:53 PM

Hello, would like to ask
I'm using Asus rt ac68u for a few weeks now with unifi 10MB
Sometimes its giving me this problem



You failed to access to the web page that you want to view.
Reason for failed connection :
No response from the remote server.

We suggest you: (Need account and password of administrator.)
Go to Quick Internet Setup Page to automatically detect the connection type and RT-AC68U will detect your WAN type automatically.




I already tried restarting the modem,router repeatly
Alas no solution
I have to wait for 30 minutes-1 hours
Then it fixed by itself,this does not









How do I fix this? i was just surfing normally and it happened.
TQ before using the router given by unifi
Is there any solution?

This post has been edited by hafez13: Oct 16 2014, 08:57 PM

I've upgraded to the lastest as you stated.

I realise that the problem maybe due to the fact that I can't rate limit the bittorrent traffic
within download master because at my traffic manager the QOS already states that the bittorrent
traffic is at the lowest.

The moment I removed the rate limit on the download master, it doesn't disconnect anymore.

That was before I upgraded the firmware from 3.0.0.4.***.1*** the one before the lastest firmware.

Thanks

Morning Asus technical,

The RT-N66U when it fail-over successfully from Unifi to YES 4G usb dongle (infomark from Korea),
it receives a 10.*.*.* ip address.

The system logs states that the DDNS client will attempt to ns1.asus.*.* to update the FQDN.

Then it states that the ip address (10.*.*.* from YES 4G WIMAX) is not valid ?

May I know why ?

I was looking at another YES 4G device called YES ZOOM gateway and in its technical specifications,
the ZOOM supports DDNS .

May I know how come ZOOM can support DDNS but not the YES 4G usb GO dongle ?

As you know when the DDNS client doesn't get updated when it fails over to the YES 4G connection,
there is no way for me to connect back to my home network.



Separately, how do I deny bittorrent traffic for users that connect to my wireless guest network or my
wireless 2.4 GHz or 5 GHz network ?


Lastly, is there a way to tell the Asus router to disallow bittorrent traffic or disable download master when it
failover to the YES 4G connection because the YES 4G is pay as you use at 9 cents for every 3MB !



Sorry, one more question, does the Asus RT-N66U support the Celcom LTE 4G usb dongle currently ?
I have a problem whereby in one particular location the YES 4G dongle is unable to get a connection.
I was thinking of using another 4G device.

Thanks.

I m using ASUS RT AC66U.
LOVE IT.

For wireless settings, which normally u guys set?
1) WPA-AUTO-PERSONAL or
2) WPA2-PERSONAL.?

No security.
But I'm using Wireless MAC Filter.

Hi yoonlim,

ASUS networking device are came with 3 years local warranty. Do send back to the place you bought for warranty claim.

Thank you

Hi hafez13,

May I know when this happen, is the DSL light on the modem still on or off or blinking?

Do try to update the firmware to the latest, the latest firmware version is 3.0.0.4.376.1663.

http://www.asus.com/Networking/RTAC68U/HelpDesk_Download/

Thank you

Morning Asus technical,

I've purchased the YES Zoom and configured it at 192.168.1.3.

Connected it to one of the LAN port of N66U. (192.168.1.1) in router mode.

N66U is connected to unifi.

The problem now is that I can't ping 192.168.1.3 once I connect to the
switch port of the N66U. Is this because of the VLAN implemenation due
to the unifi setup ?

If I connect directly from my PC to the YES Zoom and ping 192.168.1.3,
it is fine.

Because YES Zoom has a DDNS client, I would like it be connected back
to N66U so that should the unifi link fail, I can still access the network from
outside.

Thanks.

Instead of using YES Zoom DDNS client, why not seting up DDNS in the N66U.

Which ever line you use, it will still accessible from outside.

As far as I know DDNS client in YES Zoom can't be used if your Unifi connection is connected. This due to your internet connection using this line instead of YES Zoom.

Hi ASUSmy
May I if the latest ASUS RT-N12 C1 Firmware Version 3.0.0.4.374.813 supports Unifi?

The reason why I can't ping my Zoom at 192.168.1.3 is
because it was on port 4 of the RT-N66U which is configured
with a VLAN 600 for IPTV.

I tried to do a manual configuration to remove this VID 600
on the LAN port 4 because I don't use the unifi IPTV but
I can't.

Kindly advice.

I did explain previously that I was using the YES USB GO dongle on the
RT-N66U in dual-WAN mode.

And it fail over to the YES from unifi just fine.

But the ASUS ddns client says there is a failure to update the FQDN because
of the ip address given by YES .

That's why I went out to purchase Zoom because it has a DDNS client within it.

Do you want me to provide you with the error output from ASUS system log when
the DDNS fails to update correctly on the YES USB GO DONGLE ?