Sempron 2800+ OC with default voltage to 2.84GHz
|
|
 Mar 22 2006, 04:12 PM
Return to original view | Post
#1
|
 
Senior Member
4,060 posts Joined: Jan 2003 From: Penang / PJ  
|
QUOTE multiplier=6X external clock increase to 400 400X6=2.40GHz Ram set to 100MHz=DDR400 Because of high external clock, the performance must higher than your current 2.6GHz I don't think it's true. Running 2.6GHz with faster RAM will perform better. The external clock has nothing to do with performance if you are talking about HTT bus. |
|
|
Mar 22 2006, 04:38 PM
Return to original view | Post
#2
|
|
Senior Member
4,060 posts Joined: Jan 2003 From: Penang / PJ
|
There's no FSB anymore in A64 system. I'm a bit vague in my previous statement about the external clock. In yr statement :
QUOTE lower your CPU multiplier to 8X or 7X According to the setup above, 2.4GHz with 6 x 400 is impossible to outperform 2.56GHz @ 320X8. It is because the 2.56GHz system has higher CPU clock and RAM speed than the 2.4GHz counterpart.external clock increase to 300 above let say 320 320X8=2.56GHz Ram set to 133MHz=DDR426MHz multiplier=6X external clock increase to 400 400X6=2.40GHz Ram set to 100MHz=DDR400 Because of high external clock, the performance must higher than your current 2.6GHz External clock can boost performance only if u hv a fix multiplier, let's say 6x. 6x 400 of course will be faster than 6x320, However, 6x400 wont be faster than 10x300. the low superPI score of magiara system is due to slow RAM (185MHz only), but not the CPU. I believe if he is able to make 2.5-4-4-8 @ 233MHz, the superPI result will be a lot faster  Anyway, may i know where u bought this BIOSTAR?  This post has been edited by charge-n-go: Mar 22 2006, 04:41 PM |
| Change to: |  0.0124sec
 0.35
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 08:10 AM |
Quote