Price is quite reasonable since it only has to be changed once every 80,000KM in my opinion, unless you're speaking original parts and from Proton themselves .

This post has been edited by TDUEnthusiast: Jan 17 2013, 08:36 PM

Workmanship for changing all four for me was RM80 if I remember correctly. Front two RM120 per piece, rear RM130 for both. All KYB Gas absorbers.

This post has been edited by TDUEnthusiast: Jan 18 2013, 02:40 PM

Any idea on where to get cheap but good clay bars? Meh guai yeh's Clay kit is seriously expensive .

Tried looking at Ace Hardware at Ikano today but couldn't find the Permea Glass clay bars . My next stop will probably be Carrefour since I saw them there before.

Where's the shop you bought yours from?

Alright, hopefully I'll find them cause I don't want to spend RM176 on some clay kit

How much does the ONR cost and where do you get it from?

Ok thanks. Guess I'll be using car shampoo as a lubricant instead.

Adjusted hand brake to be very tight at one or two clicks awhile back, now it can go more than that already . Brake shoes wearing out too fast? Or maybe adjustment going off? Or maybe the brake shoes are already gone long ago.

This post has been edited by TDUEnthusiast: Jan 18 2013, 08:16 PM

Who's the guy? I kennot read china .

Quite cheap considering the size.

Damn, I still can't get over the painting job issue with my car . Quite a bad mental torture. But I will have to live with the nightmare for many years to come .

Who's the girl in your avatar?

. If you use the car on a daily basis, it would be very hard not to be disappointed every time , and not to mention that there's the fear where the peeling part under the door side moulding on the left front door may worsen ( it wasn't fixed ). My abah decided to visit the shop without my knowledge when the rectifications were going on, and told them that they don't have to remove the door side mouldings to repaint the area not covered when they told him the thing may break. . So now end up the defects are not fully fixed, but I don't think I want to return there for another rectification round again. A lot of time wasted and money from travelling seriously.

I think I'll consider sending the car for touching up at another shop in the near future for the boot number letterings and that peeling part for a peace of mind.

. Seems very interesting but what happens if the removal is very messy later, considering that our weather is like seriously hot when it's hot .

She looks like a little girl at times. You planning to take-over Manlet's position ke .

Can accept monthly instalment?

Leaking from window?

So far I have only got a 3 point front strut bar installed. The car corners pretty well for my liking, even with almost bald CC-1 tyres it doesn't feel like it's going to skid .

Later her face melt if you bring her back to Malaysia .

Went to the air-cond shop happily, came back unhappy because they were quoting RM3xx for the job, which involves taking the whole dashboard off. End up using Febreeze instead, and end up messing the whole car's interior with the thing, which will be very sticky when it dries .

And I discovered that my blower somehow keeps coming on and off even when the switch is turned to off . Screw this car seriously.

Eh? How to take the blower out? I want to clean them. I think they're clogged with dust, as I can hear friction noise when they spin at times. Sigh . Buy used car but not willing to do proper maintenance on it. . When cheapskates buy car you end up with a car that becomes more shitty as it ages .