I am using HTPC with E6750 and 8800GT. I have problem playing mkv, espeacilly those 13GB. At certain time, it would hang or reboot pc, and most of the time stutter, stop the play.

I was wondering if the media classic player can allow more buffer to avoid stutering.

You need the .170 patch for TrueHD Streaming on the TMT3.

Depending on receiver model, you would need EDID override.
Yahama, Pioneer AVR does not require EDID override.

---

Added on March 1, 2010, 7:10 pmYou would need to set it to dxva enabled. Upgrade to latest MPC-HC would do.

This post has been edited by ronaldjoe: Mar 1 2010, 10:52 PM

Any recommendation on NAS (2 HDD)?

Try used EDID but still no trueHD light-up on my receiver.
Can i use vista to bitstream hd audio?

BTW, i'm using yamaha rx-v465

This post has been edited by minimize: Mar 1 2010, 07:49 PM

You dont need EDID mod if you are using Yamaha. What is the card you are using to bitstream? If ATI, which model?

I'm using ATI HD 5570. Running on win vista ultimate

can you share with me where to get the DTS-HD 100mb sample file? PM me if not convenient to share....

btw, IMHO; I found that commercial player quite troublesome, free player player like MPC are more easy to configure. I had try WINDVD2010, TMT3, PDVD9 before.
by using MPC-HC, we can select any decoder, any filter, any setting or combination we like....

I'm not quite sure how to help you, Have you applied the patches for TMT3? Do you get bitstream through MPC-HC?

To stream using TMT3, you have to meet the following 2 requirements
1) patch .170
2) HDMI audio driver installed must be ATI and NOT Realteks.

Original sample (100MB)
http://www.sendspace.com/file/txz7i7

Remuxed by TsMuxer (101MB)
http://www.sendspace.com/file/yx8agd

From film Wanted

Both vista and win 7 can bitstream well without fail

Rule of thumb is to get DTS-MA bitstream first before you try on trueHD media.

This post has been edited by ronaldjoe: Mar 1 2010, 10:45 PM

Thanks for the help guyz..

After a lot of try and error, at last i successfully can bitstream TrueHD to my receiver using TMT3. Quiet satisfied when trueHD light up on receiver.

Have to use Win 7 instead of vista. I try everything on vista but totally fail.

What i use is
1- Win 7
2- ATI HD 5570
3- TMT3 with .170 patch

Want to try using windows media center after this.

You can but I read in the forum you need to use MPC-HC audio filter to bitstream HD Audio. Win7 is more straight forward as it can use directsound. Suggest you upgrade to Win7 for less headache.

Yes agreed.. Win 7 is very easy to setup than vista. Anyone successfully bitstream HD audio on vista?

---

Added on March 1, 2010, 11:34 pmAs for vista, it's advisable to clean up all previous ATI drivers before installing new driver to bitstrem.

This post has been edited by ronaldjoe: Mar 2 2010, 01:32 PM

hey, which chipset is good for HTPC?

G43 or G45??

thx bro...


H55, H57

This post has been edited by djlah: Mar 2 2010, 08:38 AM

No prob.. It is DTS-HD light up on ur receiver?

------------------------------------------------------------------
What best resolution for HD ready LCD TV 32" when using HDMI?
My new HD5570 seems not fully fit my tv screen. I can see a black border.

I haven't download it yet......
the black border are very common issue.
open the CCC, open your monitor properties, look for scaling options: adjust to 0% or whichever that can get full screen....