Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
126 Pages « < 28 29 30 31 32 > » Bottom

Outline · [ Standard ] · Linear+

 PROTON SAGA BLM, FL, FLX CLUB V36, I can carry 56 liulian. No belip me ah?

views
     
dares
post Dec 5 2012, 01:41 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(eqmal197 @ Dec 5 2012, 01:40 PM)
talking about gabby, why people if can try to evade buying amt?
*
coz AMT gearbox is problematic, those inexperience drivers will have a hard time getting it fixed.
eqmal197
post Dec 5 2012, 01:44 PM

Getting Started
**
Junior Member
110 posts

Joined: Sep 2011
QUOTE(dares @ Dec 5 2012, 01:41 PM)
coz AMT gearbox is problematic, those inexperience drivers will have a hard time getting it fixed.
*
no wondor nobody want to buy my dad's gabby. althought all problem regarding its GB has been solved. its still kickin' on the road cry.gif
alister88
post Dec 5 2012, 01:48 PM

Regular
******
Senior Member
1,367 posts

Joined: Feb 2007
From: KL


QUOTE(iskazulka @ Dec 5 2012, 12:10 PM)
u missing the point....  whistling.gif
*
i din see any missing point...
u edit the post means u are into it la... nak attention but u tumpang people's post to get attention.. tongue.gif

p/s: leona's hand on my shoulder and mine on her's while we take pix.. no need photochop wan... laugh.gif
eqmal197
post Dec 5 2012, 01:52 PM

Getting Started
**
Junior Member
110 posts

Joined: Sep 2011
QUOTE(davidke20 @ Dec 5 2012, 01:30 PM)
» Click to show Spoiler - click again to hide... «
unker, talking about comparo between new mirage and gabby, just to compare its engine
mirage is 1.2 wit 3 cylinder if im not mistaken
gabby is 1.2 wit 4 cylinder
and also mirage smaller than gabby, which people assume its lighter then gabby

i suppose this is why mirage more fuel save than gabby

just my 1 cent opinion
dares
post Dec 5 2012, 01:55 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(eqmal197 @ Dec 5 2012, 01:52 PM)
unker, talking about comparo between new mirage and gabby, just to compare its engine
mirage is 1.2 wit 3 cylinder if im not mistaken
gabby is 1.2 wit 4 cylinder
and also mirage smaller than gabby, which people assume its lighter then gabby

i suppose this is why mirage more fuel save than gabby

just my 1 cent opinion
*
Mirage = MIVEC + CVT
iskazulka
post Dec 5 2012, 02:06 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(alister88 @ Dec 5 2012, 02:48 PM)
i din see any missing point...
u edit the post means u are into it la... nak attention but u tumpang people's post to get attention.. tongue.gif

p/s: leona's hand on my shoulder and mine on her's while we take pix.. no need photochop wan...  laugh.gif
*
u said before u not really like her.. it's more like brother & sister taking picture only. tlololololol.
at least my love for her is pure .. oops.
btw, it's paintchop.

This post has been edited by iskazulka: Dec 5 2012, 02:24 PM
r3apers
post Dec 5 2012, 02:14 PM

Getting Started
**
Junior Member
225 posts

Joined: Feb 2010
From: Subang Jaya


QUOTE(dares @ Dec 5 2012, 01:20 PM)
ask r3apers....bila cabin lite TT?
*
whn i get hold of the stock...

QUOTE(DaBestOne @ Dec 5 2012, 01:28 PM)
Hot chick with nice car  laugh.gif
*
the car owner is the chick~!
davidke20
post Dec 5 2012, 02:50 PM

New Member
*
Newbie
3 posts

Joined: Mar 2012
From: Kuala Lumpur


Eqmal,

Here's some butthurt fact for Gabby AMT. AMT is not an automatic tranny, its a fully functional MANUAL tranny, with a robot seating in your engine bay shifting gear & pressing clutch!!! Imagine, when u push ur shift lever, then a transformer inside your engine bay press clutch then push 1st gear laugh.gif

When it comes to maintenance, many can deal with the gearbox, but NOT the robot itself. Some people after stop at traffic light unable to downshift, kena mati engine hope the robot sendiri reset balik to Neutral, start fresh with N baru keta boley jalan. This normally caused by the shifter problem. What if its the robot problem? Turn off engine will not reset the robot back to "N", for all auto cars if gear engaged kenot be start!!! Which is also why often saw AMT broke down by the road side.

I assume u know where is RS Auto, coz its located near DHL area. They know exactly what happened and able to REPAIR instead of replace. We've heard many butthurt owner spent 6k to replace the robot, which can be repair with a reasonable cost. Just like any other motor base movement generator. It needed carbon shaft surrounded by copper coil, in the existence of electricity to spin the shaft. When the robot gets weaken, it means the carbon terlampau nipis unable to generate strong movement. By changing carbon plate can revive the robot & make it useable again, call it refurbish. I've heard DIY refurbishment of AMT robot at the cost of RM60. If u know the problem & able to DIY, the car is the most economical auto car one can own in a life time. Stop sending Gabby to any other workshops, besides of those pakar Frenchie such as RS Auto(puchong)/Renautech(subang)/Osman Baba(klang)/kairol san(kedah). These are the experts in SERVICING Gabby instead of asking u to import replacement parts from France. Best part of it was, I've seen people couldn't start Gabby due to faulty sensor, 1 of these workshop able to WELD the sensor back in place and the car was fully restored, even better than factory setup!!!!! shocking.gif
dares
post Dec 5 2012, 02:57 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(iskazulka @ Dec 5 2012, 02:06 PM)
u said before u not really like her.. it's more like brother & sister taking picture only. tlololololol.
at least my love for her is pure .. oops.
btw, it's paintchop.
*
Woi Funker Iska, nie dah lampau creepy, mcm stalker pulak

user posted image
Anni
post Dec 5 2012, 02:58 PM

Getting Started
**
Junior Member
90 posts

Joined: Feb 2009
Hi everyone.

I been driving my saga fl for 18 months while experiencing a wind leaking noise all the time. The noise started to kick in when i hit 90km/h and above, and the noise becomes louder as speed increases. I sent to proton service multiple time and wasted weeks putting my car there but problem was not solved.

Does anyone have the same problem? or what may be the causes?

Recently, i accidently drop a pen into my dash board from those little ovally hole. Is it easy to remove the dashboard? The workshop I asked was gonna charge me 200-300 to open the dashboard sad.gif
eqmal197
post Dec 5 2012, 03:12 PM

Getting Started
**
Junior Member
110 posts

Joined: Sep 2011
QUOTE(Anni @ Dec 5 2012, 02:58 PM)
Hi everyone.

I been driving my saga fl for 18 months while experiencing a wind leaking noise all the time. The noise started to kick in when i hit 90km/h and above, and the noise becomes louder as speed increases. I sent to proton service multiple time and wasted weeks putting my car there but problem was not solved.

Does anyone have the same problem? or what may be the causes?
for me its normal. saga fl & flx has very bad noise insulation

This post has been edited by eqmal197: Dec 5 2012, 03:13 PM
zeone
post Dec 5 2012, 03:19 PM

A Friend...
*****
Senior Member
784 posts

Joined: Jan 2003
From: Rice Bowl of Msia


QUOTE(Anni @ Dec 5 2012, 02:58 PM)
Hi everyone.

I been driving my saga fl for 18 months while experiencing a wind leaking noise all the time. The noise started to kick in when i hit 90km/h and above, and the noise becomes louder as speed increases. I sent to proton service multiple time and wasted weeks putting my car there but problem was not solved.

Does anyone have the same problem? or what may be the causes?

Recently, i accidently drop a pen into my dash board from those little ovally hole. Is it easy to remove the dashboard? The workshop I asked was gonna charge me 200-300 to open the dashboard sad.gif
*
Hi...
My FL is 20 mths oledi...
Road/tyre noises?
Yup, plenty got!! That's characteristic of Our Gagas!

Wind noise?
Nope.
No such wind noise, even up to 120kph... smile.gif
Mayb cos all my doors hv xtra OEM rubber seals?

Which hole?
1. Aircon vents on dashbd facia?
Or
2. those holes below the w/screen?

If (1), then need 2dismantle those vents & air hoses...
If (2), the pen shld hv dropped down to the floorboard cos there's nothing below those holes!!

If pen not giving any probs, why not save yr $$$... cheers.gif

This post has been edited by zeone: Dec 5 2012, 03:22 PM
iskazulka
post Dec 5 2012, 03:19 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(eqmal197 @ Dec 5 2012, 04:12 PM)
for me its normal. saga fl & flx has very bad noise insulation
*
not mine.
eqmal197
post Dec 5 2012, 03:21 PM

Getting Started
**
Junior Member
110 posts

Joined: Sep 2011
QUOTE(iskazulka @ Dec 5 2012, 03:19 PM)
not mine.
*
got insuflex inside eh?


Added on December 5, 2012, 3:24 pm
QUOTE(zeone @ Dec 5 2012, 03:19 PM)
Hi...
My FL is 20 mths oledi...
Road/tyre noises?
Yup, plenty got!! That's characteristic of Our Gagas!

Wind noise?
Nope.
No such wind noise, even up to 120kph...  smile.gif
Mayb cos all my doors hv xtra OEM rubber seals?

Which hole?
1. Aircon vents on dashbd facia?
Or
2. those holes below the w/screen?

If (1), then need 2dismantle those vents & air hoses...
If (2), the pen shld hv dropped down to the floorboard cos there's nothing below those holes!!

If pen not giving any probs, why not save yr $$$... cheers.gif
*
i think anni's fl is standard no mods.
even mine still standard. wind noise sounded at 100kmh

This post has been edited by eqmal197: Dec 5 2012, 03:24 PM
nickzkuso
post Dec 5 2012, 03:26 PM

New Member
*
Newbie
10 posts

Joined: Jul 2012


QUOTE(eqmal197 @ Dec 5 2012, 03:21 PM)
got insuflex inside eh?


Added on December 5, 2012, 3:24 pm

i think anni's fl is standard no mods.
even mine still standard. wind noise sounded at 100kmh
*
he keep dreaming and telling himself that is no noise...thats why whistling.gif
iskazulka
post Dec 5 2012, 03:26 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(eqmal197 @ Dec 5 2012, 04:21 PM)
got insuflex inside eh?


Added on December 5, 2012, 3:24 pm

i think anni's fl is standard no mods.
even mine still standard. wind noise sounded at 100kmh
*
i drive town city 60km/h oni. trololololol.


Added on December 5, 2012, 3:29 pm
QUOTE(nickzkuso @ Dec 5 2012, 04:26 PM)
he keep dreaming and telling himself that is no noise...thats why whistling.gif
*
you definitely read my mind...


Added on December 5, 2012, 3:30 pm
QUOTE(dares @ Dec 5 2012, 03:57 PM)
Woi Funker Iska, nie dah lampau creepy, mcm stalker pulak

user posted image
*
inb4 hot chick car owner picture requirements.

This post has been edited by iskazulka: Dec 5 2012, 03:30 PM
eqmal197
post Dec 5 2012, 03:32 PM

Getting Started
**
Junior Member
110 posts

Joined: Sep 2011
QUOTE(davidke20 @ Dec 5 2012, 02:50 PM)
» Click to show Spoiler - click again to hide... «
yeah. i know where RS auto. have rekomended dad to go there. before this, he always visit SC to get the problem solved but still happened. then he heard about gabby specialist, sent to RS auto (dunno when my dad go), the gabby now problem free. only change carbon plate at robotic & change sensor. now he's happy. fyi, he had once change whole gb liao. luckily no charges as it still under warranty
Anni
post Dec 5 2012, 03:33 PM

Getting Started
**
Junior Member
90 posts

Joined: Feb 2009
QUOTE(zeone @ Dec 5 2012, 02:19 AM)
Hi...
My FL is 20 mths oledi...
Road/tyre noises?
Yup, plenty got!! That's characteristic of Our Gagas!

Wind noise?
Nope.
No such wind noise, even up to 120kph...  smile.gif
Mayb cos all my doors hv xtra OEM rubber seals?

Which hole?
1. Aircon vents on dashbd facia?
Or
2. those holes below the w/screen?

If (1), then need 2dismantle those vents & air hoses...
If (2), the pen shld hv dropped down to the floorboard cos there's nothing below those holes!!

If pen not giving any probs, why not save yr $$$... cheers.gif
*
I compared with my friend fl and concluded that it was mine that has a wind leak noise during high speed. Even the tech in proton admitted the noise but they just helped me to changed rubber on four doors and tighten up the door screw.

The pen was dropped into (2) the holes below wind screen that caused rolling and knocking noise with the stuff down there. It was really annoying sad.gif
I would like to try to open the dash board myself it it isn't that complicated. Or paying lesser to workshop who agrees to charge me less.

At speed above 100km/h, Tyre noise is a common issue but wind leaking noise sounded like wind coming in from a small little spot. Since I had the doors rubber replaced, the tech told me its from the front windshield rubber, but will water leaks in as well if that's the case?

This post has been edited by Anni: Dec 5 2012, 03:40 PM
davidke20
post Dec 5 2012, 04:09 PM

New Member
*
Newbie
3 posts

Joined: Mar 2012
From: Kuala Lumpur


QUOTE(eqmal197 @ Dec 5 2012, 03:32 PM)
yeah. i know where RS auto. have rekomended dad to go there. before this, he always visit SC to get the problem solved but still happened. then he heard about gabby specialist, sent to RS auto (dunno when my dad go), the gabby now problem free. only change carbon plate at robotic & change sensor. now he's happy. fyi, he had once change whole gb liao. luckily no charges as it still under warranty
*
So, tiada masalah. Orang takut sebab memang menakutkan bcoz they dunno RS Auto mar laugh.gif

QUOTE(Anni @ Dec 5 2012, 03:33 PM)
I compared with my friend fl and concluded that it was mine that has a wind leak noise during high speed. Even the tech in proton admitted the noise but they just helped me to changed rubber on four doors and tighten up the door screw. 

The pen was dropped into (2) the holes below wind screen that caused rolling and knocking noise with the stuff down there. It was really annoying sad.gif
I would like to try to open the dash board myself it it isn't that complicated. Or paying lesser to workshop who agrees to charge me less.

At speed above 100km/h, Tyre noise is a common issue but wind leaking noise sounded like wind coming in from a small little spot. Since I had the doors rubber replaced, the tech told me its from the front windshield rubber, but will water leaks in as well if that's the case?
*
Consider the rubber door seal is working fine, then most porbably caused by window rubber. The rubber use to kapik the window so it will not rattle and wind breaking noise should came from these gap.

Under the windscreen vent lead to nowhere besides the floor. If it sangkut meaning its near by ECU area, directly under the centre of desbod. Bring a torch light and search around la. Should be easily found.
alister88
post Dec 5 2012, 04:17 PM

Regular
******
Senior Member
1,367 posts

Joined: Feb 2007
From: KL


QUOTE(iskazulka @ Dec 5 2012, 02:06 PM)
u said before u not really like her.. it's more like brother & sister taking picture only. tlololololol.
at least my love for her is pure .. oops.
btw, it's paintchop.
*
at least she hold my shoulder and i hold hers... whistling.gif whistling.gif

126 Pages « < 28 29 30 31 32 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0332sec    0.67    6 queries    GZIP Disabled
Time is now: 10th December 2025 - 06:10 AM