im enjoying puffing my grape juice from kakivapor now. AWESOME!!

Bro, the burn taste will soon goes off, reason because it is still wet, and you already start vaping with the new liquid.

Keep vaping but at lower voltage, until all the juice soaked in you wick.

Selamat pagi...

ada sesiapa pernah try liquid from Vaping Not Fapping tak?

Yes bro, itu nama brand. try check kat FB.

Hi Munyen,
Thanks for the update, reason why i asked because i do travel on business alot.

Can you find out more about SG banning e-ciggy. Need more info about this, else i would bring it in my check-in luggage.

Changi is well known for their security check , altho sometimes i do carry 3 packs of cigarette on hand-carry (previous before i vape) and was NOT being questioned. I guess, if they check randomly.

wow. brazzers on friday morning.

liquid dia sedap tak bro? i asked the owner himself, and it seems that their quality control are good, unless someone else "fakes" / "rebrand" their liquids.

ingat nk beli gak nk rasa, tak pernah rasa brand ni lagi, but heard its going big walaupon flavor dia cuma dua je.

itchy ? i would suggest to reduce the voltage if you are on VV or VW.
try switching with another brand of e-liquid and vape at the same voltage as now, see if it does make a change.

Sometimes, e-liquid PV/GV are not as per seller claimed. becareful.

Sharing from ECF - from BiffRocko,

Before we get started talking about high voltage vaping though, let’s get one thing out of the way. High voltage vaping is a giant misnomer. We should be calling it high powered vaping. A bit of electronics theory, which we’ll get to in a moment, helps explain why this is the case. For now though, the important thing to know about vaping at higher power are the tangible performance differences.

High powered vaping provides several differences over low powered vaping. Chiefly, higher power produces a hotter vapor and requires less draw to produce an equivalent volume of vapor. It’s similar to the difference between sucking soda through a thin, narrow straw and a fat, wide one. The other major difference is in taste. Some juices have a stronger flavor at a higher power, while others have a stronger flavor at lower power.

A fundamental of electronics, called Watt’s law, is essential in understanding what high power vaping is all about. The best way to explain Watt’s law is by using an analogy.


Let’s imagine a boxer with big strong arms that is capable of packing a powerful punch. Now let’s imagine that boxer punching a heavy bag in the gym. The only thing slowing down the potential power the boxer can deliver is the resistance of the air in the gym. Air being relatively thin means he’s going to hit that bag with a lot of power.

Now let’s imagine the same boxer hitting the same heavy bag, but this time he’s under water. The water offers much more resistance than air does, so even though the boxer’s strength is the same, his punches is going to be much less powerful.

Electronics work in a similar manner. Voltage is potential, similar to the boxer’s strength, and resistance works the same as it does in the analogy. The more resistance there is, the less electrical power that’s delivered given the same voltage.


As usual when dealing with scientific topics, there is a mathematical formula which defines this behavior. This formula is Watt’s law.

Power = (Voltage * Voltage) / Resistance

Knowing this formula is vital to understanding what high power vaping is all about, and helps us gain a better understanding of how the different combinations of vaping equipment perform relative to each other. This is where the term high power vaping comes from. Let’s look at some concrete examples to see what I mean.


Most standard 510 atomizers have a resistance of 2.5 ohms. Mass produced PV’s such as the 510 and the eGo run around 3.2v. Using Watt’s law, we can calculate the power output for this configuration.

(3.2 * 3.2) / 2.5 = 4.096 watts

If we use a standard 510 atomizer, but instead step up to a 3.7v device our power output increases.

(3.7 * 3.7) / 2.5 = 5.476 watts


Let’s see what happens when we step up to a 5v device with the same standard 510 atty.

(5.0 * 5.0) / 2.5 = 10 watts

Now that’s a huge difference. 5v is considered by many to be a vaping “sweet spot.” Having seen these examples, you might think that 5v, with all that power, is the bee’s knees. But hold on a second! What happens when we change the resistance of the atomizer?


Most low resistance 510 atomizers are rated at 1.5 ohms. Let’s see what happens when we use a low resistance 510 atty on a 3.7v PV.

(3.7 * 3.7) / 1.5 = 9.127 watts

Holy high power, Batman! Our 3.7v device with an LR atty is now putting out almost the same amount of power as a 5v device. This is why you’ll see people saying that a 3.7v device with an LR atty simulates 5v vaping. It’s not a simulation at all. It’s just putting out slightly less power than a 5v device with a standard atty. It’s still high power vaping.


You might be asking if high voltage vaping is an incorrect term though. It’s clear that 5v with a standard atty is putting out more power than 3.7v with a LR atty. Let’s look at one more example to see why high voltage vaping is indeed a misnomer.

Some vendors these days are selling what they term high voltage atomizers. These atomizers typically have a resistance of 3.5 ohms. Let’s see what happens if we put a 3.5 ohm atty on a 5v device.

(5.0 * 5.0) / 3.5 = 7.14 watts

Whoops! Now our 5v device is putting out less power than a 3.7v device with an LR atty. The voltage is higher, for sure, but as we’ve learned here, voltage is only part of the equation - resistance being the other. Power output is what’s really determining the performance of the PV.


And that’s about it. Equipped with this knowledge, you should be much more prepared to make a decision about which configuration of PV and atomizer - or cartomizer, they have resistance too - works best for you.

You brew your own liquid? (saw your siggy).
If yes, then how to you control/maintain consistency ?

I have another noob theory, sometimes PVs also are produces instability of voltage. get what i mean?

So , better to test out with other brands of liquid first, then we can make some sort of conclusion. At least we know which brand to make our day happier for each puffs.

bro, does rebuilable tanks effect resistance too?

Alexloon, please bring more product for us!

Natzakaria is looking for tank coz he called me just now, and he choose yours i guess.

Happy vaporing!

Yeah, i believe good build up makes everything worth it.
How about maintainance of the carto ? Pakai buang or rebuilable ? If new carto how much will it cost?
How about yourself?

If maintenance is easy, then i might buy from you too.

Tarakhalalalalala... nanti2 leh lepak, nk usha gak MVP ko tu.

he meant the cartomizer yang pakai buang. lain boleh pakai balik la bang...

Thats a beauty!

haitt... awal bangun watedo.

That is one sexy clean picture!

If vapor berkurangan, is it time already to change wick in rebuildable ?