I don't think there is setting need to be done on the dashboard or on the modem itself.

Here is based on my experience using my office VPN, which doesn't use a standard VPN port. When I register with Umobile last year, I cannot use my VPN, after some complaints to them and waited for 2 months, finally they open my VPN port until today.

That's time I also use Maxis, which never had any issue. After I heard rumor on FB that Maxis started to closed some port, I not able to use Maxis anymore. But Maxis open back the port after receive some complaints from user.

I can use both Maxis and Umobile until today.

So, it's depend on which telco you use and what port. Streamyx normally will open all port.

Hi Boss, i think i did a silly mistake.
It's a problem with Maxis that i not able to connect to the internet, neither the modem nor router issue.
sorry for the inconvenient cause.

PM me bro the price..thanks

Ordered my E398 from Blacktubi yesterday, just now received it through Postlaju parcel in PJ area.

received the modem yesterday and tweaked to 2100..
nice speed as before this im using ipad 3 as a modem..
waiting for the antenna as the bulk order is needed,
trusted seller ..

already received my modem.. tq

pm me best price!:)

here for HUAWEI DataCard Client Software UTPS 23.009.09.01.983

Already posted here, anyway thanks for your effort

https://forum.lowyat.net/index.php?showtopi...post&p=60565370

im sharing this file bro...







tq

Second time buying from TS and as expected fast delivery of the modem.

Thanks a lot

received my modem today, tq bro

E398 Ping is superb



btw, what is the recommended "NV Pref Mode" and "NV Band Pref" for E398 ?

I am using NV Pref Mode = 0:4 and NV Band Pref = 0:0

Thanks

Hi Blacktubi, i able to connect to Maxis Wireless BB wth E398 + MR3420 V2.2 now.
But i have one query, at Network -> 3G/4G -> Modem setting. I cant see the E398 listed there.
Shouldn't it auto detect and appear at the Modem setting list? Do I need to do something to make it appears there?
Thank you.

That is a famous bug on Factory FW of MR3420

The fw i having now is below =)

Firmware Version: 3.13.27 Build 121206 Rel.60215n
Hardware Version: MR3420 v2 00000000

Any suggestion?

juz got the e398 and enjoying

Got my second USB from this seller, intended for my brother but if my dual 3G setup works fine I will need a third. Now I need a right USB hub since Belkin doesn't work good. Simple setup of 3G connected to my Mikrotik RB951G-2HnD.
Consistently above 10Mb/s (hovering around minus 79-85dB) download so far. Few times it was consistent to 16Mb/s (-71dB) but I forgot where and how I placed the modem. Noticed that a mere 10 degrees movement does have an impact on the speed consistently. Owell maybe due to tower placement around my area. Not sure if antenna will boost it much further, will need to further think about this option

head over to http://ofmodemsandmen.com/index.html

do some reading , select the correct ROOter FW, flash it ~ read carefully b4 starting your flashing adventure

more local stories here

https://forum.lowyat.net/topic/2657510/+1060#entry60696807

load balancing on same telco wont work, get a Celcom LTE and Maxis LTE simcard to do load balancing

btw, is it easy to configure double modems on a Mikrotik, can teach ?

Get a powered USB hub as USB modem draws a lot of power.

Yes, you might get a different tower just slight change of direction. Anyway, if Mikrotik has the ability to read CELL ID. Try get it written down.