Proton Waja Club, For LowYat.net
|
|
 Sep 3 2006, 12:56 AM
Return to original view | Post
#1
|
 
Junior Member
18 posts Joined: Dec 2005  
|
My waja manual yr 05 mitsubishi is at 2900 rpm at 110 km/hr.
My I ask what is the issue when my car (13800 km)just have some vibration when the rpm reach 2600 rpm? no vibration hen rpm (lower and higher) out of the 2600 rpm range. I go to SC and they just tune my idle rpm from 650 to 750 rpm and my car still vibrate after the tuning Please advice . Thank you Victor  |
|
|
|
|
|
Sep 3 2006, 06:42 PM
Return to original view | Post
#2
|
|
Junior Member
18 posts Joined: Dec 2005
|
QUOTE(BridgestoneRE711 @ Sep 3 2006, 02:58 PM) what kind of vibration ? The vibration is some rattling at the range of at 2600 rpm, I feel my dash board is vibrate a bit and this happens on 2600 rpm besides this rpm the waja is okay.last time i had that problem , i found that it is casued by the fender . something inside the fender is not right , not tight i assume . when touch on it , revv at 2700-3000rpm ,. no noise , let it alone , got bee sound .  What is the fender? please enlighten me Thank you |
|
|
Sep 4 2006, 06:36 AM
Return to original view | Post
#3
|
|
Junior Member
18 posts Joined: Dec 2005
|
QUOTE(nairud @ Sep 3 2006, 07:32 PM) are you sure it's the engine or is it just because your wheel's balancing is off? It vibrates on 2600 rpm whenever I engaged on the fifth gear and fourth gear and 3rd gear. I suspect this is from engine since it is rpm depended and not speed depended.double check it, i have vibration when i touch 100kmh, b4 and after no prob. Till now i havent do the other type of wheel balancing other than On wheel balancing, and normal balancing. There's another type mentioned by eddywmw , bend3r they all, but i forgot what's the name already I try to speed until 150 km/hr (short while), my steering not vibrate and car is stable. no vibration transmitted at my steering. SC have check using MUTII they said the onlty idle rpm is low so they tune engine forn 650 to 750 rpm using a screw driver at the screw near the white metal inlet (don't know what it call) before the engine between the engine and the front body(with stock insulation material) |
|
|
Sep 4 2006, 06:39 AM
Return to original view | Post
#4
|
|
Junior Member
18 posts Joined: Dec 2005
|
QUOTE(myhvictor @ Sep 3 2006, 06:42 PM) The vibration is some rattling at the range of at 2600 rpm, I feel my dash board is vibrate a bit and this happens on 2600 rpm besides this rpm the waja is okay. I check the wikipedia, fender is the part above the mud guard? Are this you means?What is the fender? please enlighten me Thank you |
|
Topic ClosedOptions
|
| Change to: |  0.0351sec
 0.21
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 02:41 PM |
Quote