Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
44 Pages « < 2 3 4 5 6 > » Bottom

Outline · [ Standard ] · Linear+

 Tp LInk TL-MR3420 Owner CLub V2

views
     
TSchuahcs79
post Nov 20 2012, 08:20 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(hairul @ Nov 20 2012, 08:16 PM)
OpenWRT Report In :-)

This is easier way to upgrade

Tools Needed
1) MR3420
2) 2nd Router + 3G Modem
This is my step : -
1) Login Standard Firmware And Upgrade Openwrt Firmware. Then Reboot And Set Router Password
    (Dont Plug Any Network cable From Router No 2)
2) Plug Network Cable From 2nd Router with 3G Modem to MR3420 WAN Port
3) Ping 8.8.8.8 1st. When Internet Available (Ping Got Reply) ,Then Run Putty and Go to 192.168.1.1

4) Copy Paste this into Putty
1st Step
opkg update

2nd Step
opkg install chat comgt kmod-usb-acm kmod-usb-serial kmod-usb-serial-option kmod-usb-uhci libusb luci-proto-3g mini-sendmail usb-modeswitch usb-modeswitch-data kmod-usb2 kmod-usb-ohci kmod-usb-serial-wwan

5) Reboot And Login
6) Go To Network>Interface>Edit WAN
7) Switch Protocol And Choose UMTS/GORS/EV-DO and Fill-up APN & Others.
8) Setting WIFI ETC and Reboot Again
9) Use
*
yea is much faster to use putty to SSH to your router and make your router update all the packages,..

notworthy.gif
stevenlee
post Nov 20 2012, 08:20 PM

look @ my Star *o* ...hoho
*******
Senior Member
3,158 posts

Joined: Apr 2005
From: -Butterworth, Penang-
QUOTE(digilife @ Nov 20 2012, 08:12 PM)
mf680, dun care hot as i dun hold it one  laugh.gif  laugh.gif

there you go............

[attachmentid=3166191]
*
some how duno why so slow when attach to router haiz....
cry.gif
TSchuahcs79
post Nov 20 2012, 08:21 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(stevenlee @ Nov 20 2012, 08:20 PM)
some how duno why so slow when attach to router haiz....
cry.gif
*
have you try your router with other usb modem ? hmm.gif
stevenlee
post Nov 20 2012, 08:23 PM

look @ my Star *o* ...hoho
*******
Senior Member
3,158 posts

Joined: Apr 2005
From: -Butterworth, Penang-
QUOTE(chuahcs79 @ Nov 20 2012, 08:21 PM)
have you try your router with other usb modem ?  hmm.gif
*
dont have other...
by the way chuahcs...
between open wrt and official firmware...
what the different?
any good using open wrt as i see more complicated to set up
digilife
post Nov 20 2012, 08:29 PM

The MNP guy, its me yeah.
*******
Senior Member
8,025 posts

Joined: Feb 2005
From: Planet Boleland
QUOTE(hairul @ Nov 20 2012, 08:16 PM)
OpenWRT Report In :-)

This is easier way to upgrade

Tools Needed
1) MR3420
2) 2nd Router + 3G Modem
This is my step : -
1) Login Standard Firmware And Upgrade Openwrt Firmware. Then Reboot And Set Router Password
    (Dont Plug Any Network cable From Router No 2)
2) Plug Network Cable From 2nd Router with 3G Modem to MR3420 WAN Port
3) Ping 8.8.8.8 1st. When Internet Available (Ping Got Reply) ,Then Run Putty and Go to 192.168.1.1

4) Copy Paste this into Putty
1st Step
opkg update

2nd Step
opkg install chat comgt kmod-usb-acm kmod-usb-serial kmod-usb-serial-option kmod-usb-uhci libusb luci-proto-3g mini-sendmail usb-modeswitch usb-modeswitch-data kmod-usb2 kmod-usb-ohci kmod-usb-serial-wwan

5) Reboot And Login
6) Go To Network>Interface>Edit WAN
7) Switch Protocol And Choose UMTS/GORS/EV-DO and Fill-up APN & Others.
8) Setting WIFI ETC and Reboot Again
9) Use
*
Abang, where to download the necessary files and one more thing, if i wan to flash OpenWRT onto my WR1043ND, same steps too?
TSchuahcs79
post Nov 20 2012, 08:33 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(stevenlee @ Nov 20 2012, 08:23 PM)
dont have other...
by the way chuahcs...
between open wrt and official firmware...
what the different?
any good using open wrt as i see more complicated to set up
*
openwrt is setup complicated a bit, using it it is better, because response of it faster than official firmware,..

and it is a DIY firmware, u add what u need into it,.

official firmware is a fixed firmware, V1~V1.3 version is laggy while V2 firmware is quite responsive fast as well,. notworthy.gif

Added on November 20, 2012, 8:34 pm
QUOTE(digilife @ Nov 20 2012, 08:29 PM)
Abang, where to download the necessary files and one more thing, if i wan to flash OpenWRT onto my WR1043ND, same steps too?
*
steps is the same,. notworthy.gif

only different openwrt firmware for WR1043ND notworthy.gif

This post has been edited by chuahcs79: Nov 20 2012, 08:34 PM
digilife
post Nov 20 2012, 08:55 PM

The MNP guy, its me yeah.
*******
Senior Member
8,025 posts

Joined: Feb 2005
From: Planet Boleland
Now peak period rite

But, twin Router + 8dBi does the JOB well

user posted image
TSchuahcs79
post Nov 20 2012, 09:21 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(digilife @ Nov 20 2012, 08:55 PM)
Now peak period rite

But, twin Router + 8dBi does the JOB well

user posted image
*
wow your first peak hour get 10Mbps , congrats,

finally u get your area feng shui brows.gif


n0v1ce
post Nov 20 2012, 09:22 PM

Casual
***
Junior Member
316 posts

Joined: Oct 2009
Sifu , possible to check RSSI with TL-MR3420's stock firmware ?
hairul
post Nov 20 2012, 09:33 PM

** Learn From The Mistake **
*****
Senior Member
944 posts

Joined: Jan 2003
From: SHAH ALAM
QUOTE(digilife @ Nov 20 2012, 08:29 PM)
Abang, where to download the necessary files and one more thing, if i wan to flash OpenWRT onto my WR1043ND, same steps too?
*
Same step and using upgrade files for your Router tongue.gif
TSchuahcs79
post Nov 20 2012, 09:44 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(n0v1ce @ Nov 20 2012, 09:22 PM)
Sifu , possible to check RSSI with TL-MR3420's stock firmware ?
*
nope, it is impossible, since not support by the router,.

it only show color signal bar & % in V1 and V1.3 ,

in V2, no color signal bar only %

Added on November 20, 2012, 9:45 pm
QUOTE(digilife @ Nov 20 2012, 08:55 PM)
Now peak period rite

But, twin Router + 8dBi does the JOB well

user posted image
*
now i reverse my setup

Panel antenna -> CRC9 -> Maxis set E372 ( handicap added heatsink open cover ) -> V2 -> lan out -> V1 -> lan out to laptop

result is everything really stable thumbup.gif

user posted image

This post has been edited by chuahcs79: Nov 20 2012, 09:45 PM
n0v1ce
post Nov 20 2012, 09:49 PM

Casual
***
Junior Member
316 posts

Joined: Oct 2009
QUOTE(chuahcs79 @ Nov 20 2012, 09:44 PM)
nope, it is impossible, since not support by the router,.

it only show color signal bar & % in V1 and V1.3 ,

in V2, no color signal bar only %

*
the signal bar =/= RSSI right ?
the signal strength seems not so accurate as I could get better speed at 40% compare to 60% rclxub.gif
TSchuahcs79
post Nov 20 2012, 09:50 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(n0v1ce @ Nov 20 2012, 09:49 PM)
the signal bar =/= RSSI right ?
the signal strength seems not so accurate as I could get better speed at 40% compare to 60% rclxub.gif
*
stock firmware is very buggy itself notworthy.gif
khairilyazit
post Nov 20 2012, 10:22 PM

Casual
***
Junior Member
406 posts

Joined: Sep 2010
From: Papar, Sabah
QUOTE(blacktubi @ Nov 20 2012, 04:39 PM)
Consider upgrade the FW of your modem nod.gif
*
modem update = done
router update = done

QUOTE(chuahcs79 @ Nov 20 2012, 06:46 PM)
what model & brand of your modem ?
*
modem = Huawei E372
router = TL MR3420 V1.3

router detect modem, then identifying again.. detect again, identifying again..
haish
TSchuahcs79
post Nov 20 2012, 10:57 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(khairilyazit @ Nov 20 2012, 10:22 PM)
modem update = done
router update = done
modem = Huawei E372
router = TL MR3420 V1.3

router detect modem, then identifying again.. detect again, identifying again..
haish
*
have u add in modem bin file in modem setting in your V1.3 ?

u are using stock firmware from tplink right ?
khairilyazit
post Nov 20 2012, 11:00 PM

Casual
***
Junior Member
406 posts

Joined: Sep 2010
From: Papar, Sabah
yup.. gonna flash openwrt now.. i'll show u kernel log..
TSchuahcs79
post Nov 20 2012, 11:24 PM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(khairilyazit @ Nov 20 2012, 11:00 PM)
yup.. gonna flash openwrt now.. i'll show u kernel log..
*
huawei e372 confirm = /device/ttyUSB0 In modem device at openwrt
khairilyazit
post Nov 20 2012, 11:27 PM

Casual
***
Junior Member
406 posts

Joined: Sep 2010
From: Papar, Sabah
QUOTE(chuahcs79 @ Nov 20 2012, 11:24 PM)
huawei e372 confirm = /device/ttyUSB0  In modem device at openwrt
*
problem is.. ttyUSB0 didn't come up.. still experimenting.. modem now on my other lappy.. serving internet.. lol
hairul
post Nov 20 2012, 11:28 PM

** Learn From The Mistake **
*****
Senior Member
944 posts

Joined: Jan 2003
From: SHAH ALAM
QUOTE(khairilyazit @ Nov 20 2012, 10:22 PM)
modem update = done
router update = done
modem = Huawei E372
router = TL MR3420 V1.3

router detect modem, then identifying again.. detect again, identifying again..
haish
*
Dialer using OPenwrt very fast.. almost same like standard MR3040
TSchuahcs79
post Nov 21 2012, 12:13 AM

Look at all my stars!!
Group Icon
Elite
6,931 posts

Joined: Apr 2011
From: Bolehland for sure ^_^
QUOTE(khairilyazit @ Nov 20 2012, 11:27 PM)
problem is.. ttyUSB0 didn't come up..  still experimenting.. modem now on my other lappy.. serving internet.. lol
*
u have to select custom and manual set in : /device/ttyUSB0

reboot twice after that,.. notworthy.gif
« Next Oldest · Networks and Broadband · Next Newest »
 

44 Pages « < 2 3 4 5 6 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0249sec    0.26    6 queries    GZIP Disabled
Time is now: 8th December 2025 - 04:04 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.