Updates...

Since i have completed the painting of my case...i decide to mount my pc into the painted case.

Below is the pc which will be running wif the celeron proc..its a cheap gigabyte rz series mobo.


Since i hasn't got my hands on any heatshrink sleeves...i have to do the cable management wif some cable ties.


This is how the top deck is gonna look alike..i dislike the old mounting position of the psu since it will obstruct most of my components rendering my uv mod useless.


In an attemp to match colour of the whole case...i painted the diskette drive's front black.


This is my current P4 rig...the reason mounting it in is to provide a my pc wif grounding.


I hope my CM rounded ides will arrive via poslaju tomolo.

Note:The steel rack in the pic hasn't being fixed...although i made the fix..i dun have time to upload it.

wat makes u think so? The rough surface rite....i painted it during a cold day. thts why...i will fix it wif some clear coats.

No..i din...i open it...put some paper to block the vents, the plug and the wires...then paint. Actually stripping oso easy oni mar...4 screws holding down the PSU's PCB...thts all.

Standard psu has oni 4 screws holding the PCB down...those high end type i dunno la...fans oso got 4 screws....if u have a soldering iron then u can remove the power lines and the whole unit is off the case.

Wat i did to mine was..jus cover the cable and spray...its a cheapo anyway...some paint did enter the psu but nvr screw it.

My PSU heart transplant....
The new cheapo i got doesn't have AC out...which means i can't connect all both my psu then plug my monitor power in as well.

The cheapo psu...working unit.


The dead psu...i brought it home after i help my not so computer enthusiast fren changed his dead psu. It has 3 rows of vents instead of 1 which is why i choosed it.


New heart in..old heart out...now tht old stuff is gonna feel like its in its mid 20s


Updates coming soon...psu sleeving with some black heatshrinks i got from Jln Pasar.

I think its a heatshrink...its a something like a flattened black rubber tube.
Erm how a sleeve like? those like a net?

A lot of shops in jln pasar got sell heatshrinks...i bought mine from the furthest shop from lrt. they also have other colours as well...blue,red(if not mistaken) and black.

And the nuts are welded off..unless he brings a cutting torch...i can't do much about it then

This post has been edited by radioactive: Mar 30 2006, 04:22 PM

My psu heatshrinking...not the heart transplanted unit...its my 230w unit...gonna get more heatshrinks tomolo.

Since i can't possibly get my atx wires off...i decided to remove the wires via desoldering it from the PCB


Split into 2 bands as i oni got the 8mm dia heatshrink tube.




The 12V atx wires.


Slide it in...


Lets burn!!!


Wires bounded into 1 band.


Results...



Will spray the cables wit flourescent paints so tht it will come to life wif the UV radiation.

I nvr put macro mahh..jus pont and shoot oni. nobody help me take pics...have to hold 1 item in hand and snap wif the other

Got my CM's rounded UV reactive IDE and floppy cables from kevinn7 on Wed

4 IDE and 2 floppy


I put it under blacklight as soon as i took it out of the box...1 problem though...blue and purple looks alike...even wif naked eye.

Thnxx...will reduce size.

This post has been edited by radioactive: Mar 31 2006, 06:06 PM

Yup...thts true...its a bit stiff...jus in case i dun like it..i'll strip it off and get a sleeve.

Heres the rounded cables in my current rig...no uv yet though and a lot of mess from the psu wires as i ran out of heatshrinks


PS:will take better pics next time...tht day the low light condition seems to make the cam unable to focus properly.

This post has been edited by radioactive: Apr 1 2006, 10:02 AM

NTBD now.....jus sitting around in the morning...college is gonna start on monday
Maybe going Jln Pasar to get heatshrinks

Heres some pics of the fixed 'senget' rack....i chopped of the top and trim each beam to equal length then weld it back on. Cannot see the super 'senget'ness anymore rite.

FYI..heres the unfixed version.




Gonna start welding the screws of the walls today.

Yay..blady tmnut fixed the slow speed problem ade......now im bak in my spamming business of spamming this thread wif more pics.

FDD front spray painting...

Tape it wif masking tape to make a cleaner paint and cover up the holes jus in case the paint might be conductive.


The finished paint job...2 layers black and 1 thick layer of lacquer to protect the paint from being damaged from usage.


PSU spray painting...

Like the FDD..i taped the plug sockets to maintain its efficiency from the paint getting into the sockets.


Taped the label so tht i still have info bout my psu jus in case i wan to refer to it in the future.


Completed psu....its the heatshrinked psu...my transplant patient is yet to receive its heatshrink.


My college start ade liao...im at Travex college...any1 from there too? Oni have time on saturday and sunday to do my moddings ....the Tt shipment oso not yet arrive to M'sia...so cannot start anything on my water cooling system.

Know to take out the front plastic i do....lazy i am....more easy i choose.

Nvr happened cuz i taped up all the holes and i spray properly ma....not spray until paint drop everywhere....
If ruined then throw away la...now oso not the fdd age ade...now its the thumbdrive age...i add fdd jus to make it complete oni.

More comin

This post has been edited by radioactive: Apr 7 2006, 07:57 PM

Waiting for bombman's supply to arrive....and rather busy wif my college.