Same happened to the tiny head sensor for the Advanced Hazel. I just approximately cut out a tiny rectangle, then stuffed it in using a blunt, thin edge of my used pen knife blade. The tiny excess sticker is cut using the sharp sharp tip of the new pen knife blade. The end result was rather superior.

Too darned small? I'm even moar amazed with a Hazel airbrush guide featured on an issue of Dengeki Hobby, where the guy used airbrush to color everything, including the neon green eyes (mad masking techniques FTW!) D:

I've a question, what is the name/type of knife that is used to deepen shallow panel line grooves? If possible please provide additional link/images

ok i will help u check for it

If u ineterested any of the following model can PM me

1/60 Big Scale Strike Gundam
1/60 Big Scale Freedom Gundam
1/60 PG Strike Gundam + with the Sky grasper
1/60 PG Strike Freedom Lightning Edition
1/60 PG Strike Gundam
1/60 PG Skygrasper + Aile Striker
1/60 PG W-Gundam Zero Custom

1/100 Aile Strike Gundam [01]
1/100 Force Impulse Gundam [01]
1/100 Aegis Gundam [02]
1/100 Gunner Zaku Warrior Lunamaria [03]
1/100 Sword Impulse Gundam [05]
1/100 Destiny Gundam [08]
1/100 Gundam Seed Strike Freedom [09]
1/100 Gundam Astray Red Frame [10]
1/100 Gundam Astray Blue Frame 2nd L [12]

1/100 MG Zeta Gundam Ver. 2
1/100 MG Sazabi
1/100 MG Char's Z'Gok
1/100 MG RMS-106 Hi-Zack
1/100 MG Freedom Gundam
1/100 MG Strike Rouge
1/100 MG GAT - X105 Aile Strike Gundam
1/100 MG Wing Gundam Zero

1/144 HG Strike Rouge + IWSP
1/144 HG Meteor Unit + Freedom Gundam
1/144 HG Murasame
1/144 HG Gundam Astray Red Frame
1/144 HG Destiny Gundam
1/144 HG Freedom Gundam
1/144 HG Strike Freedom Gundam
1/144 HG Shiramui Akatsuki Gundam (Gold)(NEW)
1/144 HG RX-121-1 Gundam TR-1 [Hazel Custom]
1/144 HG RX-121-2A Gundam TR-1 [Advanced Hazel]

Gundam FIX Cosmic Region #7003 Strike Freedom
Gundam FIX #0003 GP-01


This post has been edited by sorcecold: Mar 10 2006, 09:08 PM

Any pen knife or hobby knife would do.

I use this:

I hope this will help u decision making...hehe.

It might work on narrow grooves, but there are also wider grooves which are too wide for hobby knife to evenly cut them

I'm sure there is a special knife that for this particular job

You mean something like this?

http://img.photobucket.com/albums/v409/Leo...on/IMG_2190.jpg

For narrow grooves, i use needle..

Are you sure that this is a Perfect Grade??? According to my source, it's just a Big Scale which Bandai promise that it will be a NEAR Perfect Grade model. BTW how much is the PG Strike??

This post has been edited by Guyver: Mar 11 2006, 11:39 AM

NOT Perfect Grade. Just a full blown 1/60 scaled kit with better proportions compared to the 1/100 kit.

heh thanks dude...seen it a few times already....i wanna get but dunno if i should just add a bit more n get the ori CORE-WOrKS version as it comes with a cool looking box as well

oh izzit? haha soli i also not very familiar about gundam model

He he thank you...kinda bought Nu Gundam but really low grade

heloo~ new person here XD, i looove collecting gundam but there's 2 problem i'm suffering : lack of space and cash rofl. i have 2 master grade gundam : AMX-004 QUBELEY and Char's Gelgoog(i hope i spelled it right).

where to get tis? look interesting....

yeah, the ori box is very nice indeed. sure u have seen it b4, rite ? hehe

http://www.core-works.com/

This post has been edited by StormV: Mar 12 2006, 01:44 PM

no! don't promote some more! later i scared sold out again!

j/k

heh...ok well right now im still in the process of budgeting my cash...if everything goes well i should be ordering between this week n next week

erm, i want to ask a question. Why is it in the picture at the box and manual for BB gundam model blaze zaku phantom iclude the stand? But there's actually no stand comes with this model..

Cool~!!! Can't wait to see it.

But even i promote it, I doubt there will be many potential buyer from here. consider the price and u need a MG Freedom also. Best bet is wait for MG release.

J/K.

i think it mean the Stand is sold separately. and the Stand is come with SD Force Impulse Gundam only.

This post has been edited by StormV: Mar 12 2006, 05:57 PM

What is a conversion kit? What does it do actually?

conversion = convert a model kit into a different one
the SF conversion set is a set of parts made of resin for SF to be fitted on the MG Freedom Gundam frame...so u'll need to buy both an MG Freedom & SF conversion parts by CORE-WOrKS...but just to let u know that only little of the MG Freedom parts is used so u'll have A LOT of wasted parts...unless ur planning to use the parts on modding other kits later

edit: btw StormV, im probably gonna get Bandai's version if they ever release one as well...gonna collect both as im very sure they'll have a lot of difference between the 2 kits

This post has been edited by sousuke: Mar 12 2006, 06:19 PM