Jun 2 2013, 05:09 PM
QUOTE(wiszboyz @ Jan 21 2013, 11:11 AM)
Hi all..I've just got the new lousy TMnet router L7. I've set the PPPOE Internet Connection Type as static IP. then the TMNet technical told me static IP cannot be used for Wireless.
is there any solutions for this..
u need to tick dual LAN to enable in static IP mode..so if u have 1 static ip mean u can use only 1 LAN cable only...but u can use wifi as many as u want in IP range...normal 100-199...so u have 99 user can connect...but just wifi...LAN only 1 pc only...usually is server or switch or firewall...is there any solutions for this..
INFO
and for fix Wifi L7..u can try these software... DOWNLOAD or DOWNLOAD ...download and open the L7_FixTool_v1.00b05.exe...MUST USE CABLE FROM PC TO ROUTER...and just RUN..wait till finish...
QUOTE
Merujuk kepada perbualan kita, berdasarkan pengalaman memang akan terdapat masalah untuk MAC (apple) sekiranya wireless channel RG di”set”kan sebagai auto mode. Ini adalah kerana RG TM dapat menyokong 802.11n dimana terdapat penambahan wireless channel 12 dan 13 (some of 802.11n draft devices don't support these channels). Di antara solution yang boleh digunakan ialah :
1) Fixed wireless channel to 7 or 8 (not recommended to set below 6 due to interference)
2) Change the wireless mode to b/g only (to eliminate 802.11n wireless broadcast)
Disertakan juga configuration & troubleshooting guideline L7-N-R2000 untuk rujukan pihak tuan.
1) Fixed wireless channel to 7 or 8 (not recommended to set below 6 due to interference)
2) Change the wireless mode to b/g only (to eliminate 802.11n wireless broadcast)
Disertakan juga configuration & troubleshooting guideline L7-N-R2000 untuk rujukan pihak tuan.
FIRMWARE UPDATE L7 1.06 (MOST STABLE VERSION)
Download
if L7 problem like connect but not browse, wifi problem, please see ur version in 192.168.0.1..if use 1.08 please downgrade...
OTHERS [GUIDE TO SETUP]
PowerPoint & PDF
This post has been edited by shuyina: Mar 19 2014, 08:36 PM
Quote
0.0148sec
0.15
6 queries
GZIP Disabled