i have an asus rt-n16... if i get unifi can i use tomato firmware with unifi somehow? can tomato do those what vlan tagging etc..

[attachmentid=3143763]

mind helping me with this?

this is currently the setup on streamyx still, gonna have unifi soon. this is shibby tomato latest ver.

i'm currently referring to http://klseet.com/index.php/setup-walk-thr...setup-for-unifi for setup

but i'm still a little confused

what should it look like ultimately? as in the screenshot
should I modify VLAN1 and set the vid to 500 as well as tag it?
or should i add VLAN3 and set vid to 500, tag it an set as wan port?

so currently its like this:
vlan[1] vid[1] port1[y] tag[n] port2[y] tag[n] port3[y] tag[n] port4[y] tag[n] wanport[n] tag[n] default[y] bridge[LAN (br0)]
vlan[2] vid[2] port1[n] tag[n] port2[n] tag[n] port3[n] tag[n] port4[n] tag[n] wanport[y] tag[n] default[n] bridge[WAN]

what should it look like for unifi setup?

thanks in advance

yes it works already

Thanks so much

You'll need a VLAN for just the port connected to the BTU.
Enable that port and tag it with a VID value of 500.

As simple as that.

• 
  

If people wish to use tomato firmware with unifi, you need to set VLAN as above.

Hope this helps. Do subscribe unifi through me - anywhere in Msia. I'll be glad to offer further assistance in setting up -- as well as guest networks, etc.

If my memory serves me right,

Create a new VLAN number of your choice (e.g. 3)
Set VID to 600

If you choose to use port 4 for IpTV,
Select Port [4] [TAG]
Select Port [WAN] [TAG]

So result is:
VLAN3 | VID 600 | Port 4 [x] Tagged [x] | WAN Port [x] Tagged [x]

However, this is untested, but it works on my openwrt router.

Im using tomato right now, but had previously used another  openwrt router but had to use that unit for other purpose.

openwrt is more stable