Hi guys,
Did you guys experience b4 cannot browse internet but bittorent and MSN running ??? I usually on my PC 24 hours then the next day i open the internet xplorer then i type a website the page cannot be displayed but my msn n bittorent still downloading.....
I need to Switch off my router then on back again Then only i can surf the web... aNyone xperience this b4? how to solve it.. i'm currently using linksys v2.2 firmware is 4.20.7.. If i flash to DD-WRT V23 will it solve my problem?

oh ya i also having the same problem with u cannot connect to internet and after a reboot it back to normal.....ya i'm same with u on 24/7.. i need to reboot my modem every day!!!!...anyone knows wat problem are we having here?????i also got post earlier but seems no reply... i've already flashed with this new version WRT v23

Oh ya by the way i tell u this version WRT v23 got QOS and i'm using it...ITs awesome!!!!!...surfing web no lag....BT Still running quite fast....

yeah v23 SP1 rc1 rocks....nice firmware to use!!!!..i bet the v23 SP1 final more rocks!!!tested this v23 SP1 rc1 out and cool man even the QoS works even better....Great work by Steve Horbachuk, Sylvian Bothorel, Pierre Belanger, Eko, LawnMowerGuy1, Nbd and all known and unknown testers...Gambateh guys!

wow interesting...wat a big memory u have...i only have 13.7 MB / 16.0 MB Total Available memory but urs is 32MB wow.....wat a difference...man buy wrong version liao me...me only Ver 2.2 but nvm la already used to this ver router for one year liao..thanks to the DD-wrt final!!!..great job especially in the QoS..working fine for me for 1 year liao

oh yeah this is another way for the access to the modem if its plugged to ur internet port in ur WRT54G.

Oh this thing only work for those firmware like eg DD-WRT that can run command. in administrator ->diagnostics page

For Ur Modem configuration
You need to put ur modem in bridge mode
then just change ur aztech modem ip to 192.168.0.1 netmask 255.255.255.0

For Ur WRT54G configuration

Set ur router IP to 192.168.1.1

go to administrator ->diagnostics page

put this 2 command in the command box

ifconfig vlan1:0 192.168.0.2 netmask 255.255.255.0
iptables -t nat -I POSTROUTING -o vlan1 -d 192.168.0.0/24 -j SNAT --to-source 192.168.0.2

click save firewall
reboot router.

Then u can access ur modem via 192.168.0.1
then u can access ur router via 192.168.1.1

iayo if hassle ma dun use the encryption lor...just disable it. then hide ur SSID...

iayo u no need so bad to block bittorent!!!... u got QOS use it la dude.....i sharing with other ppl using wireless and still i able to surf n torrent as well as playing game...set ur donwlink 80% of ur real bandwidth test speed and 80% of ur real bandwidth upload speed...and set the rules for torrent to bulk....that's all...no need to so cham block torrent...then wat for use broadband????

Use the QoS Setting la then u can browse any website without killing the bandwidth when the bittorent is on. best setting is around 700 for download 250 for upload if u are on 1 MB Package..

use that 700 down and 250 up when u wanna play games such as battlenet. if not then put to 800 down and 350 upload... just play around with this number... Have fun with it!!!



This post has been edited by stmu: Oct 7 2006, 10:50 AM

oh that is my battle net port 6113....i enable it so that my game is smooth while bt is on

4) Is there any surge protectors that can support telephone n LAN ports? My house have the tendency to blow anything when it comes to lightnings

Yes there is CAL-LAB http://www.cal-lab.com/

wah why so lazy to read this earlier tread....

read this thread DD-WRT Thread

then u ma able to access the modem lor

This post has been edited by stmu: Mar 3 2007, 11:26 AM

dude why not ur fren connect from DSL600E --> WRT54GC --> SD216

1. set the dsl600e as bridge in the modem menu in Advance -> Wan -> quickstart

Type = bridge
Encapsulation = LLC
Select = Lan group 1
VPI = 0
VCI = 35

Then set ur modem ip as 192.168.0.1


2. Set ur router wrt54gc as PPPOE Put in ur Streamyx login ID n Streamyx password. Set ur router ip as 192.168.1.1

3. Follow this step Access from Router to modem

4. Plug in ur switch

This post has been edited by stmu: Mar 4 2007, 12:45 PM

ok then assume that ur modem is IP 192.168.1.1 and subnet mask 255.255.255.0

then u just plug in ur switch

1 . then u configure ur router to DHCP in Basic Setup
IP 192.168.1.2 and subnet mask 255.255.255.0 and gateway is 192.168.1.1

2. now go to the wireless basic setting menu and put in ur prefered SSID

3. if the wireless connection succesful then only u go to advance and put to WEP/WPA or any of ur choice in the wireless security.

yes you can.pls refer to the following website for setup

Wireless Bridge

dude 192.168.X.X id different than 10.0.X.X how can the thing detect wor

if u wanna set like that then u have to set ur router to 10.0.1.1

ok i explain wat it means by the code if u configure like this

ifconfig vlan1:0 192.168.1.2 netmask 255.255.255.0
iptables -t nat -I POSTROUTING -o vlan1 -d 192.168.1.0/24 -j SNAT --to-source 192.168.1.2

VLAN1 is actually ur WAN which means == ur modem (Not all dd-wrt uses Vlan1 as wan)you have to check this in Setup-VLAN

so ur modem must be in same ip group that is 192.168.1.X and the dchp modem range must start from 192.168.1.1 to 192.168.1.X and netmask 255.255.255.0

to actually communicate with ur router you must set ur router in same segment that is 192.168.X.X and different group

eg u can use 192.168.2.X , 192.168.3.X or so on in your router

192.168.2.X = group #2
192.168.3.X = group #3

you set different group is just to avoid clash of ip with the modem and ur router.

---

Added on March 5, 2007, 10:06 pmif you read my above explanation of course it cannot. but if can just tell us lor. logically it cannot.

---

Added on March 5, 2007, 10:09 pmi didn't get wat u mean.. plase put example of ur modem n router ip

This post has been edited by stmu: Mar 5 2007, 10:09 PM

yup that's right...but do make sure u download the correct firmware or else u'll bricked ur router and u need to mafan a bit go find the Tftp software and the original linksys code.bin to unbrick back.