Hi guys, i am new to this DD-WRT thing, I had flashed to the latest V23 and is wondering how to turn off the secure easy setup? Anyone can guide me, thanks in advance!!

Ya, because the original linksys firmware has an option to disable the secure easy setup under the advance settings. I usually disable this option to turn off the SES light. Therefore, i am wondering whether is there an option to disable it in the latest DD-WRT V23? After i flashed to this DD-WRT the SES light is lid on, i wanna turn it off. Thanks !!!

Just hold it???? Did you mean I need to press and hold on that SES button??? Thanks!!!!

I got another question, I noticed that my wireless network card require a longer time to acquire network addresses from the linksys router around 10 to 15 sec because i set it to automatically obtain address. I don't have such problem before I flashed to this DD-WRT, I mean when using the original linksys firmware. So, now I manually set the IP address for my network card.

To prasys: I press and hold on that SES button for few seconds and it turn white color but it did not lid off. After i switch off the router and turn it on, the SES light lid on and turn yellow again, swt!!! heheh!!! dunno why

Bump!!!!!!!!!!!!!!!

Hi all, may i know what is the port number to be set in the QOS for Ragnarok? Cause my brother wanna play RO without much lag while BT. BTW, how to check which port is use for particular application or other online games? Thanks!!!

Using the V23 sp1 final at the moment, was wondering why that option to select both the UDP and TCP for port forwarding was remove??? I thought we need both right???

[quote=Forever94539,Dec 4 2006, 05:11 PM]
I've a question regarding QoS, I have already set the ports for BT, emule and etc, but for HTTP, which port u guys using ? 80 or 0-80 or what ? How bout online video streaming, ftp downloading those ? need to set as well ? or just set 0-80 or 0-1024...etc ?

1) Can someone enlighten us on matter above??

2) BTW, how to capture all the ports that use by BT to put in QOS??

3) Under the packet scheduler got 2 option to choose from, HTB and HFSC. Whats the diff between the two?

4) Another things is, i find it confusing when using the netstat -n to identify ports use by some programs, i dunno which is the actually the port number stated there. Thanks in advance!!!!!

This post has been edited by danielwoo: Dec 20 2006, 03:48 PM

Under the netstat -o, I notice that there are 2 types of numbering stated just behind the local address and the foreign address of each processes, are these also port numbers?? Should I be using them or just take the PID number? Thanks!!!

[Which port to use in QOS for the attachment below??]

This post has been edited by danielwoo: Dec 20 2006, 09:49 PM

The funny things is the PID number change everytime i load the same program. So, not that accurate oh. For example, now I play WOW, the PID shows 1234 but when i restart my com and play WOW again it got a different PID number like 2345. So how to fix that?? Thanks!!

This post has been edited by danielwoo: Dec 21 2006, 12:21 AM

Thanks for the detail explanation, another question is regarding the port u mentioned above:-

1) I should be taking the port under the Local Addresses or the Foreign Addresses column to put in the QOS???

2) Whats the diff between the port from local and foreign?? Thanks !!!!

3) Regarding the ports for BT, what port range u all put in the QOS to be set in BULK option??? Is it the port that is use to port forward??

This post has been edited by danielwoo: Dec 21 2006, 11:58 PM