noticed that WRT54 has many models so which one do you guys recommend anyway?
do you guys use it as router + modem or just plain router/modem?
does this router really work with charm after flashed with DD-WRT like everyone said?
i've an existing linksys AG241 though

so which WRT54G model should i get?
GL? or plain G? or GS?
mind to advise?
thanks

thanks for answering my Q
i'll get GL then
looking forward to join this party!

is it worth to buy Linksys WRT54GL now since Linksys WRT300N is out now?

is it?
but i saw on thursday (7th of dec)'s in-tech

i see i see
thanks for the clarification

any comments on linksys WRT54G v5?
i'm planning to buy one because can't find any GL
please give me feedback
thanks

i seriously need help here
i just bought a WRT54GL v1.1 and i flashed the router to DD-WRT v23 SP2 and straight away i connect to PC without reading the instruction and CD although it says there "run cd first before connecting cables"
now, i'm having a bit of trouble here

the layout of my internet connection:
Streamyx -> Linksys AM300 -> Linksys WRT54GL -> 2 PCs

i understood that WRT54GL still needs a modem to work with
once i plug into the "internet" port, i get no connection from my internet
but if i plug into the normal ethernet port, everything will lag a bit (ping is 500ms to yahoo)
what should i do? please advise...
thank you

*both of the routers are same IP - 192.168.1.1

This post has been edited by andyjyneo: Aug 9 2007, 09:56 PM

yes, i did
when i set modem (linksys AM300) to 192.168.0.1, i cannot login at all

thanks waifaq
i've successfully connected my WRT54GL with AM300
but the latency is unstable
sometimes i get 300ms, sometimes 234ms...
seems like not stable compared with last time
i'll give it a try for a few days first
thanks again

wahlau eh
i just bought a linksys WRT54GL for my office
so i paired linksys WRT54GL with linksys AG241
linksys WRT54GL as router ; linksys AG241 as modem - currently my setting is AG241 connect to WRT54GL's internet port
the problem now is when one of the user on BT, the rest of the computer cannot jalan
what should i do now?
any advice?

This post has been edited by andyjyneo: Sep 10 2007, 12:21 PM

oh yes
using v23 sp2

i just flashed my linksys WRT54GL (previously with DD-WRT) to tomato
looks cool
anyway, there's a section in DD-WRT to set P2P in administration section but i couldn't find that option in tomato
will my torrent affect my surfing & gaming speed with tomato default settings on?

last time when i used DD-WRT, it's fine because i can limit
now, i can feel my gaming speed is affected a little

This post has been edited by andyjyneo: Jan 22 2008, 01:33 AM

anyone here can help me with tomato firmware on linksys WRT54GL?
settings are all default, but with some changes in PPPoE, port forwarding & wireless only
when i on bitcomet, bandwidth are sucked, but bitcomet isn't moving very fast
the rest of the PCs couldn't even connect to internet
i've just flashed from 1.16 to 1.17... and yet to test

which firmware is better? DD-WRT or tomato?

below are the screenshots of my QoS config
i've enabled QoS and DMZ as prasys said

This post has been edited by andyjyneo: Apr 10 2008, 06:06 PM


Attached thumbnail(s)

but funny, my home's WRT54GL (runs on tomato 1.15) doesn't hog bandwidth at all
i'm running on utorrent with VPN

only my office's WRT54GL has this problem when run on bitcomet
some things are fast on bitcomet... i've no choice

i'm facing problem with tomato firmware again
just now, i tested with new utorrent 1.8 beta
boom! bandwidth hogging is back again