My latest uptime 20 Days


Attached thumbnail(s)

Anyone tested the version v24 alpha? :-) 3ssid with one router is just like Cisco Airnet Access point

I found WRT54GL the Linksys Centre at Lowyat plaza sell them for RM 270 ( I think expensive )manage to buy 8 port switch for RM 89 from them

They also have WRT54GS Ver 4 in their stock selling at RM 350

WDS Enable my neighbour pay me RM 30 monthly for sharing my Wireless Network hehehe he bought an Access Point we tested the WDS function on it and it improved the Signal

Hehehe i already QOS his Mac Address for no P2P or Bittorent allowed

This post has been edited by MX510: Jul 28 2006, 04:52 PM

again some months are over, but we all within the development team are sure that its
time to release v23 SP2 as final to focus our work full into v24.
i hope the time till v24 gets final will not be so long but from the current project state i'm pretty sure it
will before christmas

major changes in this release: (beside fixes and enhancements noted in changelog.txt)

additional supported hardware:

Linksys WRTSL54GS
Buffalo WZR HP G54
Belkin F5D7231-4
ASUS WL500G-Premium
ASUS WL-300g
ASUS WL-500g
Siemens Gigaset SX550i

new software features:

- as always colorful and shiny
- polish language support
- dutch language support
- italian language support
- french language support
- pppoe support for micro edition
- pptp support for micro edition
- new dyndns client with additional options and dyndns provider support
- radio switch on/off scheduler
- pushbutton on WRT54G v3 - v6 models can be used to switch off wifi radio too
- dhcp leases can be stored in a persistant space
- improved help
- pppoe relaying support (special edition only)
- and uncounted smaller improvements, gui changes and fixes as well as updated linux packages

Thanks for all help, patches and support especially to
Steve Horbachuk, Sylvian Bothorel, Pierre Belanger, Eko, LawnMowerGuy1, Nbd
and all known and unknown testers.

© 2006 Sebastian Gottschall aka BrainSlayer (info@dd-wrt.com)


ah and note. Username = "root", password = "admin"


I will test this today

http://www.dd-wrt.com/wiki/index.php/DD-WRT_Docu_%28EN%29

Check this out man RTFM

Pleease read the wiki on DDWRT before flashing

My snapshot for SP2 just manage to have free time to flash it seems to be improving



This post has been edited by MX510: Oct 4 2006, 12:51 AM

Yeah earlier version of WRT54GS :-) GS Rocks because lot's of memory has been online 24/7 since i bought it no problems at all :-) SpeedBooster also rox

Going to hunt WRT54G or WRT54GS tommorow at Lowyat plaza if i am lucky i will fine those router hopefully WRT54L sold there tommorow it's for family house hehehe just managed to registered RM 20 packages will switch username hehehe

This post has been edited by MX510: Nov 22 2006, 07:47 PM

I bought WRT54GL today for RM 250 at the Level 3 Linksys seller cannot bargain anymore no choice, i saw the antenna sold for RM 180 kinda expensive i think at the moment increasing the mW power source in the antenna already boost the signal no need to buy unless few of my neightbours wanted to subscribe my WiFi Networks

WRT54GL

DD-WRT v23 and higher supports this router.

The stock firmware from Linksys on the WRT54GL v1 won't accept a firmware image over 3MB in size (you will get the error: "Upgrade are failed!"(sic) if you try) so you will need to flash the mini version of DD-WRT onto the router BEFORE flashing the std or voip versions. (Remember to hold reset button for 30 sec after flashing mini version.)

The WRT54GL Ver 1.1 stock firmware will accept a firmware image of at least 4MB in size; Flashed the memory with DD-WRT standard version (V23sp2). Did not see any success or fail message, however when completed got a blank page in IE. After rebooting Windows, was able to reach the new DD-WRT screen.

[Comment added 07/08/06 by Wayland] I found it best to start with factory settings before flashing WRT54GL for the first time.

[Comment added 23/09/06 by Ullapra]After flashing my WRT54GL to v23 SP2 I was unable to access the web administration page at first. It turned out that the httpd process was crashing every time I tried to access it. I found this workaround in the forums and it fixed the issue:

nvram set language=english
nvram commit
reboot

After the reboot my httpd was back and running. I suspect that the initial error was caused because I hadn't explicitly reset to factory defaults (I assumed that the just-out-of-the-box router would already be at default). The original thread is HTTP device admin not responding

Any idea which version should i use for the mini?

This post has been edited by MX510: Nov 23 2006, 08:35 PM

Ok i made it the router have 16 MB total Memory compare to my WRT54GS which have 32MB Total Memory just flash it just now first to mini then to standard version now testing heavy load on it

Heh all my WRT54GS can be pulas by hand jer x payah open whole thing pun pelik betul ada gambar?

I'm using tm.net.my broadband i also kinda weird

PPPoE
Login Status
Connected
IP Address
224.239.174.42
Subnet Mask
255.255.255.255
Gateway
224.239.174.42
DNS 1
202.188.1.5
DNS 2
202.188.0.133

Here is the details in the modem it shows like this

Currently testing the router heavy torrent rite now 2 torrent at the same time working just fine no effects on surfing DD-WRT the best

I also thought new range for Tm.Net.my tommorow will use my old WRT54GS will bring this WRT54GL back to Perak on Monday

No throttle for the torrent working just fine with Utorrent with encryption enabled

This post has been edited by MX510: Nov 24 2006, 02:28 AM

The latest version is version 7

Pulas arah lawan jap should remove both antenna

You're statement is referring to newer version Of WRT54G / GS series i'm and some of the people are the pioneer using the good old days version of WRT54G and GS version which have bigger RAM of course with newer version 2MB nothing much can be done. I'm sure you're quite jeolous hehehe go get WRT54GL still have 16MB ram inside it can flash to DD-WRT anytime

Anyone here have configured their DD-WRT working as hotspot?

QOS working on LAN and WIFI to filter WIFI you can add their mac address in the DD-WRT QOS page :-)

Tick the catch all p2p connections under Internet Policy



Hope this fix ur problems