musang api = firefox

sort of. Some people love to buy new processor and sell it off after 1 week. Some people love to change GF every month. But you can call me wifi enthusiast, i think thats the correct term.

But i'm way far from this fellows. I think if i going to be like them, MCMC will sure kacau me.

Hmm... with the wifi hardwares currently available on the msian market, how far can a wifi signal go? the maximum possible that is.
Just curious.

i confident with my current gears, it can go up to 2km LOS.

I had that kind of problem too when i just flash the router. Now its working superbly with some new adjustments on the settings..

RC are pre beta release and have some minor problems like memory leak etc etc, if you are unsure u can just use the stable version to avoid the hassle. Not that im saying that RC is bad, they sometimes gives more features and better compability compared to the previous version. Pick your choice.

I've one WRT54G V3.1(stated at sticker below the router), and I've been using HyperWRT 2.1b1 quite sometime already, and I have some questions to ask, hopefully any sifu here can help.

I've been using HyperWRT 2.1b1 along with cFos for internet connection optimization, but recently I saw one guy mentioned that DD-WRT can do as what cFos does, is it true? Also how come in the configuaration page I saw the firmware is v4.30.1 instead of the V3.1? Can anyone give me a guide of how to flash my current firmware to DD-WRT? I remember that u've to reset the firmware or something so just want to ask to confirm, also recommend the best DD-WRT firmware version as well.

Thanks in advance.

firmware version and ur router "hardware" version is totally different thing...
if u wish to flash to dd-wrt, i am not too sure but u should flash to original linksys firmware then only flash to dd-wrt...
if u dont wan to try out the rc... get the generic broadcom standard v23s2...
about cfos i hav no idea sorry... but just go to dd-wrt wiki for more info... thanks...

This post has been edited by osxchd: Dec 16 2007, 01:25 AM

ive juz bought a whr-g54s and flashed it to dd-wrt v23 sp2. Any recommendation on the Xmit power and i would like to give priority to webpages rather den my p2p when im using the line. So when im not using 100% back to torrents. How can i do this ?

i got two linksys

1. WRT54G v 2.2 = openwrt
2. WRT54GS v 1.1 = faizurawrt

Both has txpwr 255mw and kismet drone running...

together with tnc linksys 7dbi antenna

This post has been edited by spayre: Dec 25 2007, 01:15 PM

Hi
I just got my first wifi router
WRT54GS v1.1
i would like to know
which 3rd party firmware is the best for this router
i've went to dd-wrt.com, but i dont know which one to download

RTFM all the instructions manual. Follow all steps or you will suffer the consequences

First flash to mini

http://www.dd-wrt.com/dd-wrtv2/downloads/s...ini_wrt54gs.bin

Then go to standard

http://www.dd-wrt.com/dd-wrtv2/downloads/s...v23_wrt54gs.bin

okay i downloaded both files
but the problem this router is preloaded with open wrt Version: WHITE RUSSIAN (0.9)
what should i do?

can i use this page to flash it?

should i erase Erase JFFS2 partition?

first i need to flash to mini rite?
then after that to standard?

White russian is a very good firmware man. Its one of the best one. I like white russian , with your router you can load heaps of stuff !

Guys, I have some problem with my WRT54GS flashed to dd-wrt v23 sp2. It has been running fine for almost a year until my housemate recently start downloading p2p heavily. He use to have 1 download rig and now he uses 2-3 rigs all running utorrent and thunder5 (I got this readings from the UPNP page). Anyhow, he crashed my router last week, the router just hang and when I reboot it came back online loosing all my settings and streamyx password. I reconfigure everything and from that day onwards my WRT54GS is slow. Slow as in it takes my 5-8 seconds to load the admin page. Last time it use to be 1 second or less. Any idea what happen?

I used to have this problem aslo. Router work fine for 1 years + then suddently become frequent hang, laggish and other problem. Tried to reflash still the same.

I would suggest U, do a hard reset..then reflash. If u have done that and still cant solve. I suggest U give tomato firmware a try. It work for me....now my router work flawlessly...

This post has been edited by mikelanding: Dec 27 2007, 09:52 AM

hard reset.. do you mean pressing the power button for > 5 second?

Will this go back to WRT54GS original firmware or go back to DD-WRT clean default state? I might need to download dd-wrt v23 sp2 first if it will revert back to buffalo's firmware.

Btw, just a quick check. I am using streamyx RM66 package (512k) so I set in my QoS default bandwidth to be 400 down and 200 up. Is that ok?

Okay , GreenJellyBean

You need to do hard reset. This is how it works

Firstly , press and hold the reset button for more then 5 seconds (you should see DMZ Light up or power LED blinking continuously , if you see this. You have restarted the modem successfully). Next up , you should flash back to the default firmware. Just go to upgrade and flash back to a linksys firmware (This step is optional). Then once you are in the linksys frimware , flash back to DD-WRT and it should be okay

The other option is to go with Tomato. Tomato offers a better QoS service and its not bloated as DD-WRT. I would suggest you to try tomato a shot.

hi all.. i just updated to ddwrt v23 sp2
problem is i'm not sure how to setup the qos
totally newbie
i'm on 512kbps jaring
can anyone post ur screenshot here?

This post has been edited by arafat: Dec 30 2007, 05:36 PM

damn ..... guys .... bought wrong router ......
got the WHR-G125 instead of WHR-G54S ...... damn damn ....

nevertheless although i can flash it with DD-WRT ...

the goal that i wanted is to actually MOD it using SD/MMC but found out that this WHR-G125 looks like cannot coz no information ...

just to try luck ... anybody knows any known SD/MMC hack for this router?
thank you VERY MUCH

if not, looks like i gonna get another soon .... broke

thanks and Happy New Year

Anyone know shop(LYP) that have stock for WHR-G54S with pricing <=RM150.