And also I wouldn't say it is much harm but the harm will certainly increase when you increase the power rate.
THE DD-WRT V1, For Linksys WRT54G/GL/GS Fans -ONLY-
|
|
 Oct 22 2006, 09:46 AM
Return to original view | Post
#101
|
 
Staff
12,089 posts Joined: Dec 2004 From: Malaysia  
|
|
Quote|
|
|
|
|
Oct 25 2006, 11:32 PM
Return to original view | Post
#102
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(sotong168 @ Oct 25 2006, 11:29 PM) hi, i have set the static ip for my wireless & wired connection, i checked my BT's listening port with http://www.canyouseeme.org/ , the site always can see the port with wireless connection but not wired one, anything i set wrongly? FYI on BT running, with wireless i could see many remote clients but wired only shown local clients with much much slower spd. Appreciate your help, thks~ IMO, you only port forwarded to the wireless connection and did not port forward to your wired connection. |
|
|
Oct 26 2006, 12:30 AM
Return to original view | Post
#103
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(sotong168 @ Oct 25 2006, 11:42 PM) thks for reply, i already portforward both Alright, I tested out that site you gave and I don't think it is really accurate for me. I did try that and the ports that are opened for mine seems to be not detected by them wheres uTorrent detected it was opened. |
|
|
Oct 30 2006, 11:13 PM
Return to original view | Post
#104
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(HiT-AbLe @ Oct 30 2006, 11:04 PM) I'm using WRT54G V3.1, last year I flashed it with HyperWRT_G_tofu10 until now. This firmware served me well compare with buggy orgianal firmware so I didn't follow up to flash the latest firmware. Well there shouldn't be any problems but if you are worried you can still flash it back to the original Linksys firmware first and then proceed to flash with DD-WRT.Until recently my brother keeps using BT to download his stuffs, and my connection will hang or die after half hour or so, but his connection is still active and rocking, that's really annoying me! So I want to know whether this DD-WRT firmware can solve this kinda problem? Can anyone explain to me how to do flashing to DD-WRT firmware for my case, remember I'm using HyperWRT not the orginal one so I wonder any different about the flashing method. |
|
|
Nov 3 2006, 09:41 AM
Return to original view | Post
#105
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(pds_disi @ Nov 3 2006, 07:26 AM) help: wrt54gsv4 flashing - newbie question For a peace of mind I would recommend you to use the wrt54gsv4 file though. I too used that file to flash my router and it works like a charm now.this is my 1st time flashing a router, my new wrt54gsv4 is totally incompetent to surf net + run bt together, so i decide to try on other firmware by looking into this page http://www.dd-wrt.com/wiki/index.php/WRT54...lation_Tutorial i know i need to flash dd-wrt.v23_mini_generic first, then flash dd-wrt.v23.std.zip i have a little question before my first flash in my life, i found there are dd-wrt.v23_mini_wrt54gsv4 and dd-wrt.v23_wrt54gsv4 available in dl section, which v4 is my router version so my question is, flash using generic and standard file as showm in tutorial or flash using wrt54gsv4 file to suit my router? or it doesn't matter ? thanks in advance |
|
|
Nov 5 2006, 10:42 PM
Return to original view | Post
#106
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(Haratio @ Nov 5 2006, 09:39 PM) I am learning to set the QoS. What is the ideal value for download and upload in kbps? i heard many says to set the value at 85%-90%. I use calculator to compute and it has decimal points. What value should i use? Well the best is do a bandwidth test first. From there, then only you set it to about 90% of the download speed. Same way goes to the upload.I am on the 512kbps/256kbps package. |
|
|
|
|
|
Nov 18 2006, 11:08 PM
Return to original view | Post
#107
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(andyjyneo @ Nov 18 2006, 10:26 PM) noticed that WRT54 has many models so which one do you guys recommend anyway? WRT54G family is not a router + modem combo. It is just a pure wireless router which can be flashed to a 3rd party firmware for much improved stability and features.do you guys use it as router + modem or just plain router/modem? does this router really work with charm after flashed with DD-WRT like everyone said? i've an existing linksys AG241 though |
|
|
Nov 19 2006, 08:09 AM
Return to original view | Post
#108
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(CalvinCLK @ Nov 19 2006, 04:26 AM) The shopper told me that the factory even can detect it after we reflash back to the original firmware, wondering how they detect it. If I flash it many times dunno they can detect it or not, tempting to overwrite the flash memory inside. I did it twice just now.. No problem. I don't think they will be that free to check your firmware though. My WRT54G was struck by lightning before and I sent it back for RMA and they were willing to replace a new one for me after it was checked by the service centre. |
|
|
Nov 20 2006, 09:41 AM
Return to original view | Post
#109
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(andyjyneo @ Nov 19 2006, 04:50 PM) so which WRT54G model should i get? In this case I would recommend the WRT54GL. If you go for WRT54G or GS now, most likely they are all the batch with reduced RAM memory thus you need to flash it to the micro version of DD-WRT.GL? or plain G? or GS? mind to advise? thanks |
|
|
Nov 23 2006, 11:01 AM
Return to original view | Post
#110
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(Pennywise @ Nov 23 2006, 09:59 AM) Just curious... I am using WRT54GC v2 (the one with antenna). Will I be able to use this firmware as well? Here are the list of routers tested and supported by the DD-WRT team :» Click to show Spoiler - click again to hide... « |
|
|
Nov 23 2006, 03:06 PM
Return to original view | Post
#111
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(sanosizo @ Nov 23 2006, 02:06 PM) right now im sharing my internet with 6 other ppl (2 houses) & they all located a floor above me. my concern is that they only got a weak signal from my gsv4. i have 3 solutions in mind rite now... Well, in my house, I just use my old D-Link DI-624+ to act as a repeater meaning all wireless signals will go through there and then it goes to my Linksys WRT54GS to do the QoS.1. buy a high gain antenna (7 or 8dbi) (>$150) 2. drag a cable up their houses then put a switch in there. (>$60 each) 3. buy another access point & put it in 1 of the houses or in my house (gsv4 - front, new ap - back) (>$150) whats the best solution in term of cost & the quality of the signal. becos i need to make sure all my customer get good internet speed. rite now im thinking of getting another access point... this can be configured using wds rite? but need 2 wrt54g, am i rite? |
|
|
Nov 23 2006, 04:18 PM
Return to original view | Post
#112
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(sanosizo @ Nov 23 2006, 03:35 PM) what about the linksys? can it also accept wifi connections from pcs n laptops? becos im planning to widen the wireless coverage so that i have 2 aps. Sure there won't be any problems but the reason why I didn't enable wireless LAN on the WRT54GS was to reduce the load on it. |
|
|
Nov 24 2006, 12:54 AM
Return to original view | Post
#113
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(azmihamzah @ Nov 24 2006, 12:43 AM) MX510, where do you from...ur ip looks a bit different la...or u use jaring broadband now? I was wondering that too but the IP used to view this forum is TMNet's. |
|
|
|
|
|
Nov 24 2006, 02:21 AM
Return to original view | Post
#114
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
Most probably a new IP range added again.
|
|
|
Nov 24 2006, 09:38 AM
Return to original view | Post
#115
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(d@odao @ Nov 24 2006, 09:33 AM) just need some opinion...thanks in advance... This could be the hardware faulty resulting from the lightning strike. I've experienced before that my WAN and LAN port 1 was fried and sent it back for RMA.my wrt54g using dd-wrt firmware, recently kena strike by lightning...it is not dead, thought...i can still get into the admin webpage...use wifi to surf net...but, noticed port 1 not functioning properly...sometime other ports oso like not stable liao... so, i wonder wht could the cause be?...hardware kong?...or firmware need to reflash again?...cheers... |
|
|
Nov 24 2006, 09:52 AM
Return to original view | Post
#116
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(d@odao @ Nov 24 2006, 09:41 AM) thts mean need to get a new router liao lor?...it is running quite hot also...thn, i notice the lan get disconnected...wan oso disconnected...thanks for the reply... If you want to send it back for RMA, you can but you will most likely be returned with a v5/v6 of WRT54G meaning you will need to use DD-WRT micro version. |
|
|
Nov 24 2006, 10:55 AM
Return to original view | Post
#117
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(d@odao @ Nov 24 2006, 10:10 AM) i dun think there is still any warranty for it...i bought tis wrt54g v2.2 back in 2004 if not mistaken...any suggestion for other model that is good with dd-wrt?...thanks... Linksys WRT54GL would most probably be your next option. |
|
|
Nov 25 2006, 11:50 PM
Return to original view | Post
#118
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(utopian86 @ Nov 25 2006, 11:23 PM) Anyone ever encouter the router(WRT54G) suddenly dc, u can't access to the router via pc cable or wireless? Probably due to router hang. Which version of the WRT54G are you using and how frequent does it 'hang' ?Mine happen last month, so i send it back for warranty. still no reply from them. |
|
|
Nov 28 2006, 09:00 AM
Return to original view | Post
#119
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(harrychoo @ Nov 28 2006, 08:09 AM) Should i get the G or GL model for this router? Every version is made possible to be flashed to this firmware but I think choosing the GL version should be better as it has more RAM memory compared to the others.I need it for my home usage. What version the router have to be in order to be able to flash this firmware? |
|
|
Nov 28 2006, 10:30 PM
Return to original view | Post
#120
|
|
Staff
12,089 posts Joined: Dec 2004 From: Malaysia
|
QUOTE(insanenuisance @ Nov 28 2006, 08:35 PM) today i just brought a linksys wrt54g broadband router, i have a d-link 504t 4 port router modem. so i connected wrt54g to my d-link modem but cant connect to the internet. iwat went wrong ?..IP conflict or my configuration is wrong ? thanks....i'm kindly newbie toward networking... Is your D-Link on bridge mode ? |
|
Topic ClosedOptions
|
| Change to: |  0.2739sec
 0.31
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 04:35 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.