My inverter and ccfl came. But I encounter more problems than I'm use to. When I got the 8 port inverter, I don't have 2 pin to power it and the 2 pin in the small inverter that can connected to the ccfl doesn't work. Then my ccfl's inverter got shortcircuit and it was smoking, and the resistor got fried and my capacitor got blacked so in plain english, I fried the inverter. A new small inverter is coming. I still don't know what to do with my 8 port inverter. Any suggestion how to power it? Plus, I got a image for the t virus powered on.



This post has been edited by JakeGFX: Dec 12 2012, 05:20 PM

I broke my t virus cathode so t virus will look ugly now.
sorry guys, hope you will still read it.
Plus I broke one of acrylic holder for my t-virus.
Talk about my bad luck.
On to good news, I have extra tubing because it's not enough at first.
And I got my feser dye.
Really wanted to go mayhem but mayhem too expensive..
Feser is ok, I'm using it in my current build.
I don't fully trust brands I don't usually know that well.

---

Added on December 12, 2012, 6:07 pmI always get shocked if I put my hand near the switch and I can smell burn plastic on my 8 port inverter. it works now because I have a 2 pin from logisys cathode that I bought from clawhammer (Alvin).
It's weird because only that inverter work and the 3 other doesn't work.

This post has been edited by JakeGFX: Dec 12 2012, 06:07 PM

This updates was actually posted in other websites earlier than here so if there is a reply in lowyat to catch up with the other websites, I'm late and manage to update the log in lowyat here because during update 3 or 4 in this thread, no one wanted to reply so I can't post because lowyat has a picture limit for each post. Another update inbound.

---

Added on December 12, 2012, 6:42 pm

I got some picture with just UV Cathode.
My advise, go for LED.
Cathode is a pain in the ass.
I fried on inverter and I keep getting shocked by another.
But I chose cathode because the light distribution looks better.
And oh snap, I got a second pump. Is not overkill unless you get 2nd pump.
I'm doing just for you guys.
Let's see what's this baby going to do.
One more piece is left for this build which is the ram.
Stay tune.



This post has been edited by JakeGFX: Dec 12 2012, 06:42 PM

This will be the last update that is not posted. So it's already up to date with the rest of other sites.

_______________________________________________________________________________________




Since I'm still waiting for my savings to increase.
Here's some pictures of random stuff of the rig
I assemble back the mechanism for the side door.
It was a pain in the ass I tell you.
Anything with a spring will be a douche to you.

let's just hope it finishes, there was suppose to be an update but a fcking leakage pissed me off till I have no mood to refill it or check the problem again.

I blame ek radiator for this, fcking piss of shit.

turns out it was the fcking ek rad. it was leaking.
Make me wash my floor 3 times. I thought it was the compression fitting not screw properly but never felt water on it.

it was the screw that came with the ek. the leak came from the corner of the place where the water was stored in the rad. Pictures will be uploaded soon.

you'll not see any update till next year. I'm current on holiday in Iceland.

TEASER!!
Big Update Coming.





This post has been edited by JakeGFX: Dec 27 2012, 03:19 PM

Here's a picture of the leaking EK, the teaser above is not related to this.
I can't get a refund because I damage the grill so yeah, DON'T CHOOSE EK radiator, you can pick their cpu and gpu wb but just don't go with their radiator.

I still love EK wb, I just don't want other people to suffer the same fate. the leaking was not damage by me. only the rad grill damage.

It's a big big update. My motherboard has arrived.
It's a killer. Here's some picture to enjoy that pure intel POWAHHH!!

More pictures. (accessary mostly.)
BLUE SLI!!
And lastly, Intel, you suck at color coordination -.-









This post has been edited by JakeGFX: Dec 30 2012, 05:46 PM

I'm in the airport, going back to Malaysia. In London now, So I'll post this small update. It's just accessories like fan connectors. My RAM update is tomorrow in like 13 hrs because that's how long my flight is.








This post has been edited by JakeGFX: Dec 31 2012, 09:28 AM

Someone stole my ram!
OH MAH GEWD

you need to mod it. since screw stand is stuck on to the tray already.

I have mouth ulcer so i cant swallow anyting including saliva. I have been staying in bed with no mood to update. I have pictures ready. Just lazy to post them


This post has been edited by JakeGFX: Jan 4 2013, 03:58 PM

Ram is here.
It looks damn good IMO.
And the bitspower flow indicator (I don't think I'm gonna use because of no space.)

APES pm with me.


"yes we do.
Bitspower Universal RAM Module Water Cooling Set For 4 Banks 4-DIMMs.

RM285

http://www.bitspower.com/html/product/pro_...&kind2=16"

This post has been edited by JakeGFX: Jan 5 2013, 01:45 AM

Here's some shot of Bitspower CPU Summit EF.
It's a beast and it's unusual for me because I didn't knew Bitspower have a cpu block because it's not famous. And my gpu (GTX680). The waterblock was installed like 5 months ago from my last build. So yeah. enjoy the wb and the gpu.







This post has been edited by JakeGFX: Jan 5 2013, 04:03 PM