that's something new. Hmmm. Then many can request for public ip if qos is high

it's not new, i've been using public IP with that QoS for a long time already. I think I've mentioned in the forum before as well. Anyway, in my area, I prefer to use public IPs over normal IPs cause they are much stable and consistent.

u use unetp or pre-maxisbb APN?

unetp

may be because there are less user on public Ip in ur area ?

can we use unetp on Legacy or normal Maxis BB ?

you can, just call maxis hotline CS and request for it,

you can try out since your area private IP is damn lame speed

i'm using unetp on legacy. there is another APN meant for Maxis BB which ywkwy mentioned earlier. But i haven't tried that with my legacy SIM.

and like Chuah said, you'll need to request CS to activate it before you can start using it.

This post has been edited by maxcheam: Oct 29 2012, 05:20 PM

if unetp is stable, even 5Mbps on a E1762, i am damn satisfy already ,

kind of a far reach to get that speed on that modem. it should be no issue for DC HSPA+ though. it will depend on the Maxis network in the area that you'll be using it.

My E372 can touch 7Mbps easily at 6am on Unet and easily touch 4~5Mbps all day long.

So if i wan private IP from Maxis, can i touch 5Mbps too ?

try to use it and u will know

E372 once upgraded to latest FW and set TX=27 cannot connect via HW5503G router

E367 once upgraded to latest FW and set TX=27 connect very fast on HW5503G router, even with an extension usb cable 3 meters long.

HW550 is Aztech brand, i guess not many pipu use this router.......default FW not OpenWRT-ed yet

Latest firmware kah?

still cant decide which apn to pick

maxisbb / unet

I use maxisbb 99% of the time, unet can't get me to good IP range

Anyway, it is area dependent

i not sure if i should reconfigure tx value on the modem and use on the modem again.. or just let 23

Put it to 26, it shouldn't drop anymore since got router supply enough juice

your thread FW la........

But E372 on MR3420, superb on HW550 sucks

Update for SUPERCHARGE
I found out Huawei E372 support up to 33dBm TX Power.
Only some superior batch support it
Mine is one of them

Only for the dare devils

---

Added on October 29, 2012, 8:52 pmAztech for somewhat even lose to China company

This post has been edited by blacktubi: Oct 29 2012, 08:52 PM