a few pages in front did have some user feed back -200 for E367 as it is single channel modem ,

for DC_HSPA+ modem can up to -450,.

of course, the actual number u need to tweak and test it one by one to see which is works best for you in your area

LOL, E355 dont support,

This post has been edited by chuahcs79: Feb 4 2013, 10:52 PM

huawei E355 is consider router,. that's why it is not support

why not u try to experiment all the value ?

single channel modem dont over -350,. need to below than that,.

no one can tell you exactly what value is good for your modem in your area though, u need to experiment it yourself

mine zte mf600 is unlocked originally, i buy from maxis too,.

best is just find your E1762 firmware and reflash it,..

tweaking to increase tx power in performances = yes,..

other tweak = not really

well, there is a Max number which u can tweak up to,. any value higher than that wont apply,.

so dont worry, if u worry your E173 is over heat, just open the cover,.. that way more air can flow through,

or place it in air con room ( if u have air con ), or near window which have good air flow or some where shade which cooler or use a mini fan to blow at it if u are using it heavily

setting for E372 on which part ?

if can detect by QPST software, then am sure u can tweak

yes, any Qualcomm chipset usb data card modem can detect by QPST all can tweak

you refer to TX boost or antenna gain tweak on first post >?

Nope. sorry,. not support

may be you can check with your seller ?

yes it is,..
this tweak apply to most qualcomm chipset modem

LTE modem dont need to tweak at all,

just check your LTE RSCP/SNR and try to get lower number will do,.

the rest is up to the LTE tower u connected to

it is default set on Auto 4G/3G/2G,.

when u out of LTE area, u will auto -> 3G

tweaking usb modem = overclock cpu in computer

similar theory,..

hilink chipset currentl better leave it original first,
any wrong tweak/upgrade firmware will confirm 100% brick the modem

i dont think this tweak is apply to mifi,..

but if u are adventures enough, can try whether the QPST sofware can detect your mifi first, then go from there

** of course all these tweak is do it on your own risk**