should be fine , -400 also okay ma........

E372/MF680/E398 default is -2xx , so -400 should be fine, but if fried then Blackie's have E392 ma   

i wan to flash a 3.6Mbps to 7.2Mbps , the Vodafone K something, do u have the FW ?

i wan to test -250 on it , finally E220 with -250, stable and responsive on RSSI -65dBm 

my facebook, twitter load within 3 sec.. lol



i wanna sleep at facultyy!!
my house speed not liek this   

After tweak still can use with OpenWRT?

OK, I'm using TX 33 now, should I change back to TX 20 first?

You mean 20 or 33?

hey guys out there, did you guys facing a problem when sharing 3G using router, does the speed impacted when someone downloading ?
Coz I'm using E372 with vodafone HG556a router having this problem ler, when I'm downloading, my tablets loading web page like snail, and my IPTV totally stop to response. Everything back to normal after I stop downloading.  It looks like speed is there but the bandwidth not too sure .. it never happen if using TM "stimme"

Then looks like 3G / 4G still cannot replace wire broadband... sigh... 
still need to use world most expensive broadband. 

Bro,

Do you remember that you help an Asus Router user to answer the question if RT N16 support USB modem ?

Can you link me to that post again ?

I just bought a RT N16 today and i wanna see his N16 interface

Thanks

 

this is mine on RT N-16

[attachmentid=3255807]

posted my first hand touch at the Maxis thread

LOL,..

u interested to get one ? 

workable for Zoom modem from Yes?

those who are using e372 modem
maxis has finally fix their broken link to the latest modem firmware

here is the link
TS can update the 1st post
tq

http://www.maxis.com.my/maxisbb/download/E....00.99.B757.zip

Hm... is the tweak 2 any good for E398?

For huawei e355 what is the best value??

Hi blacktubi,

Thanks for a great Qualcomm chip modem 'SuperCharge' procedure ... I'm from Australia. 

Whilst I understand the first step:

1. The first tweak boosts the Tx power by 3dBm (+23 to +26dBm)

    Go to this value, change it to 26
    NV_WCDMA_MAX_TX_POWER_1

Now +23dBm is 0.2 watts and +26dbm is 0.4 watts (3db is double the power).

So this is very significant and might just be something to help those on weaker or even congested links gain a reliable connection?

I think for most modems, the default value will be '23 or 24'?

3G output power is defined by the device power class. I think this document shows the relative UMTS power class levels: http://www.wayland.ma.us/Pages/WaylandMA_B.../powerlevel.pdf

Class 1 +21dbm

Class 2 +24dbm

Class 3 +27dBm

Class 4 +33dBm

Has anyone tried values >+26dBm?

The down side is that the modem will likely run a little hotter!

2. The second tweak is doing something to the Rx antenna which I don't profess to understand:

    Go to this value, change it to -444 from (-100?)
    Depends on modem, the value are different, test which one that works the best for you
    “NV_WCDMA_VGA_GAIN_OFFSET_1”

What does the second step actually do to the modem internal antenna(s) and what to the values mean?

PS I presume the usb modem drivers must be installed for QPST to function?

Cheers

Hi blacktubi, thanks for the reply.

Wow +33dBm. That 2 watts!

    Class 1 +21dbm, 125mW

    Class 2 +24dbm, 250mW

    Class 3 +27dBm, 500mW

    Class 4 +33dBm, 2W

In Australia, we have a broad mix of Huawei, ZTE and Sierra 3g and 4G modems.

Modems with external antenna ports are almost universal.

Our current 4G modems are the Sierra 320U, ZTE MF821 (both Telstra) and Huawei E3276 (Optus).

A reliable 3G modem used by many is the ZTE MF668.

I'll take it all away and have a play and see what i can find out about these devices.

Best Regards

John k

how to unlock ZTE MF600.....

blacktubi

May i know the default values for Huawei E1762? Thanks.

#856
#876

Can we lock MF680 to ONLY a Ndis connection Only ?

If yes, how ?

Thanks