Yup, need to be careful with this one

But currently all Huawei LTE range support DC-HSPA+

help plz

why NV_WCDMA_VGA_GAIN_OFFSET_1 on my 3 modem (173, 1762) do not have - (negative) ????

when i put -234 no gain on antenna

put back 234 same no gain.

TQ

Orit already plenty of read fine solution TQ ALL



This post has been edited by mantoll: Apr 27 2013, 12:16 PM

What is the default value of MF680's “NV_WCDMA_VGA_GAIN_OFFSET_1” ?

Or rather the best value and default value ?

Thanks

hi.. is there any way we can lock the modem to specific cell ID? (MDMA)

Nope, or try use some can or something reflect to the tower location

Or just simply buy an antenna

This post has been edited by blacktubi: May 12 2013, 10:32 PM

E398

33TX, NV_WCDMA_VGA_GAIN_OFFSET_1 -444 awesomeness. Can't wait for my panel antenna to boost more!

blacktubi : had u by chance tested the new e398u1v2 on qpst to supercharge? mine failed... when add the modem port, the modem dissappear and appear again... it happen only when the specific modem port added to the qpst...

This post has been edited by z8net: May 14 2013, 04:27 PM

mine is the same, try a different port, mine worked on one specific USB port, and I'm now using it.

just a question, high rise have lower signal quality? I'm on 20+ floor now and seems i'm only getting average of 2-3Mbps on download, and connection to SG is ~1Mbps

z8net : You probably added a wrong COM (Might be the actual internet COM or diagnostics).

You can refer to device manager I guess under communication section (can't sure which section since didn't use Windows for a while )

Anyway E398 no need any sort of supercharge, wrongly

BBXiong : Typically yes, technically depends on where is Maxis base station, what is your signal you get on MDMA

z8net get decent speed even on KLCC

really? then I revert back to default value try if it's faster maybe? lol

anyway, unrelated question, if i walk to maxis and request change sim for iPhone 5, they will straight give me nano sim? or normal sized sim cut down to nano sim? feel like wanna get it changed today but I don't have any adapter in hand, if they give a new nano sim instead of cut version I won't be able to use E398 for a while liao @@

Maxis won't cut SIM card, they will issue you with a new one

I guess you can still put in E398 but make sure it didnt hide inside else hard to get it out

better not risk that

4G LTE sim they only got nano sim... buy adapter first then only change sim

Can I know what is the best value for E367?

Test it yourself

Different modem different value, some say -444 is the best

Oh. Will try it.
Between a phone and a usb modem, which is more power?
Because my modem cant detect 3g in my area but my phone can.

Probably your modem doesn't support UMTS 900Mhz but your phone can

Read first page I got some explanation there.

Modem is definitely better if comparing same range. Dont compare a 21Mbps modem VS a LTE Phone

Oh, Thanks for the explanation.
I just check my modem info and it does not support UMTS 900.
It only support UMTS 2100. Seems that Celcom using 3g@UMTS 900 at my area, in my area Maxis and Digi can detect 3g so they use 2100 I assume.
Yeah, I think this is the time for an upgrade.

Once upon a time, a tower at my neighborhood give me 7.2Mbps DL speed. (DC-HSPA+)
What I remember, if pointing to 2 different tower using external panel antenna, theoretically the speed will be double. (is it?)
I feel curious if I point 2 antenna to same single tower, is it speed double or remain 7.2Mbps.
Or may b DC-HSPA+ + EDGE ?

Need some clarification

A modem only can connect to one tower at once.

Celcom got DC-HSPA+? :