probably u have dial up to the internet too early, that'y qxdm not able to recognise.

only dial up to internet AFTER U succesfully establish the target port in qxdm, no hurry. see details in step 5 and 6.

okay, thanks bro..
i found that i forget to connect my network before checking with the QOS..

Geng ah...

stuck at step 5

got this blank

modem e372

u miss a step,

go option -> communication -> select the Port of your huawei modem

so it can detect the port

then i got this la...

cannot connect to internet after choose the target port..

I assume this method cannot use for mifi such as e587?

run MDMA first

then run QPST

then do QXDM

then baru connect MDMA

cannot

same error...

wether i run QPST, QXDM before or after i run dashboard/MDMA, both also working fine though
have u try your modem dashboard software instead of MDMA ?


This post has been edited by chuahcs79: Sep 28 2012, 03:02 AM

i think the QXDM QoS is inaccurate coz my actual downtime spd is much higher than the display 8640kbps

modem use E372

as the instruction at the front page, need to open QPST first..then choose port..then open qxdm then connect internet using dashboard mobile partnet/mdma right?

so i try booth mobile partner and mdma...same error..dont know where the mistake now...try reboot and do again also fail la..

This post has been edited by LcBoy135z: Sep 28 2012, 11:03 AM

you may need to select another huawei port to try out.



This post has been edited by coolstore: Oct 7 2012, 01:14 PM

add on reminder:

ar, as chuah have said before and i answered before:

for general users who use these Qualcomm specific program just to view options and functions, then free to click and view around.

but if you plan to enter ur own command or tweak the default value of modem, e.g. increasing wireless transmission tx power beyond the modem default value (FCC testing approval value) (overclocking to be easy for u to understand), then:

a) be ready to face a hardware risk that surpassing risk of flashing wrong firmware ya (overclocking the tx power make it looks great at early stage with great signal level, but also speed up the wear and tear process, or may lead to sudden dead at unexpected moment if the modem hardware really cannot sustain it).

b) and confronting different RF (radio frequency) Radiation Emission level (no longer the reported approval safety level in FCC document).

it is same way when happening to overtweak wifi router/wifi adapter.

flashing firmware problem: the worst lead to 'brick' status, but still reversible bcoz no hardware failure.

hardware wireless transmission unit (tx power) malfunction: no wireless activities any more, dump to dustbin.

This post has been edited by coolstore: Oct 7 2012, 01:21 PM

so basically if i want to test if my place got the dc-hspa+ coverage(even though on maxis website i got the coverage) i need to buy 42mbps modem+maxis 42mbps prepaid plan rm5 just 4 testing only? n i plan to upgrade to maxis unlimited plan btw

Yup..

by having 42mbps ( dc-hspa+ ) modem, then u can check if ur place cover dc-hspa+ or not and also to check if ur modem dc enable..

anyone here can borrow E372.......perak area....tapah or kampar.....i wanna check of my area is DC-hsdpa.......

Just want to double confirm, Its U-Mobile using Maxis Tower?
Because in maxis website, didnt stated location of the tower, only u-mobile website show the tower location. I need to point the antena to nearest Maxis tower.

yes, just RM5 simpack only.

as receiving feedback from some members that Maxis map is actually 'not accurate', some place actually don't have DC-HSPA+ yet but showing got.

---

Added on October 27, 2012, 10:45 pmthey don't share 3g tower facities, roaming now available on both 3g network instead.

maybe when it come to LTE, they may start to share tower.

This post has been edited by coolstore: Oct 27 2012, 10:45 PM

All maxis simcard can get DC-HSDPA?

So If I cut maxis simcard and put it in 3rd/4th gen iPad or an iPhone 5, I can get DC-HSPA service?