Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN Proton INSPIRA Owners and Fans Thread V46!, VOTE!!! VOTE!!! VOTE!!!!11!

views
     
DrJackal
post Sep 25 2012, 03:54 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Bros, just a little feedback on the So called stiff collar ring, rigid ring , cock ring or whatever name it has. The thing is worth every penny. Could be my car is old and tired clocking 65k++ km and 18mths old. The steering feedback is much better than stock now. The turning is much sharper n accurate too, the car wouldnt sway if i turned the steering1 to 2cm left n right while driving 90km/h. The ring surprisingly reduces some of the suspension noises at the rear ( There was noises on uneven road even after the bump stopper replacement and in fact was scheduled for 2nd replacement this week). Body roll also reduces slightly. I'm 100% satisfied.
DrJackal
post Sep 25 2012, 04:04 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Another issue the rings solve partially is the noise and steering vibration while turning on uneven road at low speed. The vibration n noise reduce by half at least. Anyway i will update again if any of those issues does come back ( durability checking )
DrJackal
post Sep 25 2012, 07:44 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(Poadster @ Sep 25 2012, 04:12 PM)
Bro....

If the steering response is sharper and more accurate, what do you mean when u say the car wont "sway' even when u turn the steering 1-2cm while driving???

Do you mean the car wont turn and "sway" to that direction?? Doesnt this means lesser steering response as your steering "dead zone" have in fact increased by 1-2 cm??

Or do you mean the car wont "roll" as much....?? But then again, the car dont suffer body roll at all when you steer and steer corrections (the 1-2cm movements) during a straight line drive, no??

Or do you mean you DONT need to do much steer correction as much, which again is negative to the fact that if you steering response have increased, very small steering movement will translate to the wheels, thus the need to do more steering corrections??

Sorry, kenot understand that statement in bold....  rclxub.gif  rclxub.gif

Added on September 25, 2012, 4:15 pm
One is for engine and power response at low end RPM, the other is to harden and stiffen the chassis during movement....  Diff poison diff function....

How much is those rings for front and back full set, and installation.....?? Adds up doesnt it....??
*
Sorry for the confusion, I meant there was dead zone before I installed the ring and now it's much minimized

DrJackal
post Sep 25 2012, 08:09 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Sc retorque my undercarriage almost every visit becoz I complain bout the rear suspension and steering noise without fail till they finally schedule another bump stopper replacement. The result is different from the rings.
DrJackal
post Sep 26 2012, 12:24 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
I was told R3 gonna release full exhaust + ecu . Boost 20hp
DrJackal
post Sep 26 2012, 12:41 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(K3nnYkl82 @ Sep 26 2012, 12:31 PM)
I was told there will be 2.0MT ... whistling.gif
*
I was told there will be a inspira hatch 2.4 manual & auto 2013
DrJackal
post Sep 26 2012, 12:55 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Anyway I was at r3 to buy the lowering springs. But they have no stock , so ended up buying the receipts only with maybankard. The sales said the r3 rims weighing 7.8kg each....


DrJackal
post Sep 26 2012, 01:06 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(ckming @ Sep 26 2012, 01:01 PM)
7.8kg for 18" ? not bad wor!
*
I'm abit skeptical actually... Have to google for info tonight. After kena by proton staff so many times...

Added on September 26, 2012, 1:08 pm
QUOTE(WilliamHoo @ Sep 26 2012, 01:05 PM)
Didn't ask when got stock

So fast u go scout jorrr
Maybank card still got discount?
*
They said this week.. Again they told my car was to arrive "within this week" and ended up after 2 weeks.

Ya promo still valid till month end

This post has been edited by DrJackal: Sep 26 2012, 01:08 PM
DrJackal
post Sep 26 2012, 06:10 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(nzh0920 @ Sep 26 2012, 03:24 PM)
doctor... go for RCS then come TT fetch us test drive.... see how good is the damper  biggrin.gif
*
Apatu RCS?

Added on September 26, 2012, 6:12 pmI just went back to collect my R3 springs, really a surprise the stocks arrive the same day.

Anyway, I saw this r3 rim for exora 16in, gunmetal , according to the guy it's 5.5kg and compatible with inspira... ( info yet to be verified )



This post has been edited by DrJackal: Sep 26 2012, 06:12 PM
DrJackal
post Sep 26 2012, 06:26 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Anybody has cross drilled their discs?
DrJackal
post Sep 29 2012, 12:26 AM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
This sentence alone already makes me label this otromen as a hypocritical liar. The rest of what he said is less important.... Just my gut feeling...

"We never actually visited LYN until recently someone told us you guys are making fun on Tuners."
DrJackal
post Sep 29 2012, 12:41 AM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(jnick @ Sep 29 2012, 12:30 AM)
All at TT..... No one here d.
Drjackal, haha. Let them be la. The show is over tongue.gif

Why u no go TT.
*
Becoz I'm anti social tongue.gif
DrJackal
post Sep 29 2012, 07:34 AM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
Sorry if I sounded making fun of him. But I'm giving an opinion as a user, I'm never really an active member in either club, group or forum, I'm just an owner who wants the best for his car. It really sounds dangerous and risky to engage someone who doesn't understand the maps to remap our car. He did mention himself he just copied somewhere in the net and doesn't understand the thing becoz he is no engineer. Would u engage someone who knows nothing about suspension to install adjustable suspension for u even if he has the right tools to do the jobs? What will he do if I encounter engine knocking/ choking/ stalling issues after the remap? Will he be able to fine tune the map to suit my engine? We all know not every engine is manufactured equal..

It's really just my point of view that i would like to share after reading the posts. Cheers and happy modding.

This post has been edited by DrJackal: Sep 29 2012, 07:40 AM
DrJackal
post Oct 1 2012, 12:52 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(satria89 @ Oct 1 2012, 11:32 AM)
What i mean is pickup la..coz heard people said 2.4 body heavy might lose to 2.0 in pickup...  blush.gif
Woi.. i mean pickup la not top speed  doh.gif  anyone tried before? haha
*
I kena cucuk by a modded 2.4hb before. I drive 1.8mt. It was a fairly straight line , he left no room for me to breathe all the way to my 6.8k at 2nd n 3rd gear then he zoomed pass. just no chance for me.
DrJackal
post Oct 1 2012, 01:49 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(JackNg1985 @ Oct 1 2012, 01:19 PM)
Maybe my size is small gua.
Wahahahaha.

But true news is.. I kena smoke by 2.4L during mid range.

So how? Any idea how to put 4B12? Since engine size same with 4B10.
*
No la, the one cucuk me is modded. At least intake and exhaust.

A mechanic told me he can do 4b12 conversion but I haven't got the time to check with him the details
DrJackal
post Oct 2 2012, 06:38 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(ckming @ Oct 2 2012, 06:16 PM)
That's what i'm doing lol! but decat liao loud leh.... kenot hide  sweat.gif
*
Decat = real man
DrJackal
post Oct 2 2012, 07:09 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(ckming @ Oct 2 2012, 06:55 PM)
Have u decat ?
*
That's my first ever mod, in the 2nd month I got my car
Felt a boost in the low end
DrJackal
post Oct 2 2012, 07:35 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(ckming @ Oct 2 2012, 07:26 PM)
I see is the diff significant?

Added on October 2, 2012, 7:27 pm
Can. Poor ppl ma sad.gif
*
I remember I told the mechanic I felt 10-15% more torque in the low end (before 3.5k ) but it was before 421 and remap. The improvement may seems relatively small if compare to 421 + dyno tuned map
DrJackal
post Oct 2 2012, 07:42 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(T630 @ Oct 2 2012, 07:38 PM)
got ask the mechanic do port polish with uprated valve spring ar... brows.gif
*
LoL it was an exhaust specialist.

I was tempted with 2l stroker kit plus port n polish until I got smoked by a 4b12 , lol
DrJackal
post Oct 2 2012, 07:52 PM

-
*******
Senior Member
3,107 posts

Joined: Jan 2003
From: Subang
QUOTE(T630 @ Oct 2 2012, 07:46 PM)
how much u de-cat... want go try try see can accept the noise anot... brows.gif

stroker kit size veli sensitive as pointed out by our mijubiji wannabe pariah installer mr. man of his words aka macgyver or well known here as k3 the kopy-kat-kenny... got a b c type... if skali silap pasang siap u... sweat.gif
*
Skali do blue print and balance then.

I decatted and replaced with 2 bullets, I'm considering to remove the bullets. And wait, I test drove William's car his car has more torque after 5k rpm. Not sure is it becoz of decat....
« Next Oldest · Car Clubs · Next Newest »
 

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.1706sec    0.20    8 queries    GZIP Disabled
Time is now: 13th December 2025 - 09:29 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.