i just had a new transplant to MITSUBISHI 6A10(1.6 V6, 24valve)
it was a halfcut, so it didn come vf da exhaust

so any recommendations on wat type of exhaust system 2 use?
(im a noob in exhausts)
quote da price n place 2 do also.....

SPECS of 6A10:
6A10
- Displacement: 1597 cc
- Power: 140 PS (103 kW) @ 7000 rpm
- Torque: 147 Nm @ 4500 rpm
- Power density: 7.71
- Engine type: V type 6 cylinder DOHC 24 valve
- Fuel system: ECI multiple (electrically controlled gasoline injection)
- Fuel type: Unleaded premium gasoline
- Compression ratio: 10
- Bore: 73 mm
- Stroke: 63.6 mm
- Fuel consumption at 10-15 modes: 8.3 L/100 km

6A10 can be found in year 93/94 Lancer and Mirage
__________________________________________________________
im plannin 2 do tuning also after doin da exhaust, because it is only givin me 150km for rm50(1.92p/l)

2.0 diameter?
can explain like da mid-box or sumthin n all?
(da whole system)juz tell me wat 2 ask da shop

This post has been edited by motherker: Apr 6 2006, 11:20 PM

i would like minimum sound.......
i drive normally.....
i want high-end power.....
i like da look of twin mufflers(like da latest Perdana V6)......
so......wat 2 ask da shop ?
recommend good shops around klang.....
n how much will it cost?

This post has been edited by motherker: Apr 7 2006, 11:58 PM

i've got myself 2.0inch piping+long bullet(kind of twisting shape)<-recommended by shop owner, he said can jimat minyak<<

my setup for my humble 6A10 is = 2.0inch piping+long bullet(twistin type)+Perdana V6 twin muffler

feedback:engine feels very responsive when revved up....(mechanic told last time da air from da engine choked 2 come out of the 1.5wira exhaust setting)
haha......juz press da pedal a lil bit aso, da rpm climbs up
laz time, like u feel a lag.....

.....VROOM..VROOM....VROOM......eat my dust, Perdana V6 S**k*r

i've got myself 2.0inch piping+long bullet(kind of twisting shape)<-recommended by shop owner, he said can jimat minyak<<

my setup for my humble 6A10 is = 2.0inch piping+long bullet(twistin type)+Perdana V6 twin muffler

feedback:engine feels very responsive when revved up....(mechanic told last time da air from da engine choked 2 come out of the 1.5wira exhaust setting)
haha......juz press da pedal a lil bit aso, da rpm climbs up
laz time, like u feel a lag.....

.....VROOM..VROOM....VROOM......eat my dust, Perdana V6 S**k*r

i've got myself 2.0inch piping+long bullet(kind of twisting shape)<-recommended by shop owner, he said can jimat minyak<<

my setup for my humble 6A10 is = 2.0inch piping+long bullet(twistin type)+Perdana V6 twin muffler

feedback:engine feels very responsive when revved up....(mechanic told last time da air from da engine choked 2 come out of the 1.5wira exhaust setting)
haha......now, juz press da pedal a lil bit aso, da rpm climbs up
laz time, like u feel a lag.....

.....VROOM..VROOM....VROOM......eat my dust, Perdana V6 S**k*r

This post has been edited by motherker: Apr 12 2006, 08:54 PM

sorry mod, 4 the triple post, my comp jammed, u can delete it off....
da middle box im not sure, but da whole set up (2.0 inch piping+middle box<long n twisting type<<+perdana V6 twin muffler+RM590(inc.installation)

PS: i checked the other shop on da same row, he charged RM500
but i didn do bcoz da man did not look educated, he said need 2
modify da muffler laa bcoz wira small laa ...bla...bla...bla.....
da shop owner which quoted RM590 explained properly and all laa...
fortunately, da shop owner was my dad's fren's son....haha.....so
got it all done at RM550
very satisfied vf da installation+performance........

my middle box was the most expensive 1....da owner recommended...
i think abt RM200 like dat....(mayb less...dunno laa...hahaa)

If u wan, den i can go vf u 2 da shop.....get discount maa...

sure, after tuning...haha.......