Plan to change my 1.5 SVDO manual wira stock extractor to PowerZone tuned 4-2-1 extractor.
Requires advices from sifu-sifu here

1. Where can get good services, workship and reasonable price for this mod?

i. NS Performance Tuning Sdn Bhd (552594-M)
No. 1, Jalan Penerbit U1/43,
Batu Tiga Glenmarie Section U1
40150 Shah Alam, Selangor.

ii. ENEOS Kepong Branch
G17, Jusco Metro Prima
1 Jalan Metro Prima,
52100 Kepong, Kuala Lumpur.

iii. ENEOS 1 Utama Branch
Lot LG 14, Jusco Bandar Utama
1 Lebuh Bandar Utama
Bandar Utama Damansara
47800 Petaling Jaya, Selangor

iv. KakiMotor or SpeedWork sell this product?

2. Is there any imitation PowerZone extractor in the market?

3. After change it, what to do with the extra stock extractor? kept it, trade-in or sold it?

if u looking for powerzone extractor, of coz go back to their workshop in NS performance tuning in glenmarie lo...

so far havent encountered any imitation powerzone extractor...

use ur stock extractor and throw at stray dogs around ur house...

Wah, wira stock extractor so worthless ah?

Any 1 hv idea on da price? of this power zone extractor.... btw is it suitable for wira 1.5 auto. appreciate any replies..

PZ extractor RM450 include installation

shinjite , i'm looking for PZ_EXT_04 that suit for my 4g15 wira.

it's RM450 include installation at their workshop in NS performance tuning in glenmarie?

Current extractor that use to exchange can trade-in?

yes pretty much worthless, unless its from wira se...

if from wira se, changing to powerzone extractor wont gain u alot of horsepower... wira se extractor is kinda good enough...

I don't think they accept trade ins

Kept it also no use, right? Just leave in the shops or sell to "Kedai Botol"?

if can, go sell it

Sell to kedai Botol or forum?

sell in the forum / the scraps

Polish it and make it as ornament for our house~ that is what one of my friends did to his old car parts~

Hi all,

Planning to change my exhaust system, deff not going consider WH after reading all the bad comments, any other decent places you guys recommend? Was considering everco but i'm keeping my options open currently running a Manual Myvi with an Apex-I open pod, looking for a straight flow system thats not too loud nor not too quiet. Basically still want some noise to syok sendiri abit haha

thanks to all and cheers!

Hi guys... just wanna to ask if any1 noe abt it.. i hv a 4g91 lancer auto tranny ya... i wanna change the exhaust.. currently i hv a kakimoto r straight flow given by my frend.. same as the pic below..



btw the inlet is 2.3" outlet 3.5" without silencer 1" with silencer.. i wanna fit tis muffler into my auto tranny car but i noe i will lose backpressure causing lack of torque.. so the question is.. can i add 1 s-flow midbox to increase backpressure & tis muffler at the end of exhaust. will it work for auto car? thx btw...

i'm using Powerzone 4-2-1 for my 4g13 satria..
i think it the same that use for 4g15 ..
yes the rm450+installation and i keep my ori extractor,just in case


BTW..
wanna ask sifu hear..is't worth for money to buy K&N drop in since if compare with some brand like simota etc,the price gap is huge..
rm275 for satria GLi

can someone recommend me some nice and friendly exhaust shop? with good and nice price? actually change S flow piping and big muffler will increase FC?

This post has been edited by nozzle: Jul 13 2009, 02:12 AM

guys, what is the max inch" pipe for N/A kelisa, my kelisa engine is Twincam w/ Ignition

This post has been edited by WarlockMage: Aug 8 2009, 10:22 AM

---

Added on August 8, 2009, 6:40 pmerr... 1.5"??....

This post has been edited by the_catacombs: Aug 8 2009, 06:40 PM

Say, for my case where D16 engine mods not that popular in JP/MY, what kind of extractor should i look for and where?
I've been using 2" piping for years and since 'ade rezeki' recently, i think its time for me to change the extractor.

*im using 1.6L SOHC D16(me516) efi in a civic eg, manual.
**the only headers i can find are by US tuners (DC, megan, etc etc)

***oh, i have PM'd kweng for his oppinions