never go for cap ayam ... that's my only advice ... JFA is not bad ... did my muffler there , hmmm getting louder thou my wanna be scooby sound ... lolz

This post has been edited by 812799: Feb 15 2009, 04:11 PM

According to kweng84, the muffler sound will last for 1 1/2 year. But currently the sound already lari a bit, but not much. During high rev the ganas sound is still there, uhh freaking chun. I know muffler won't last, other than this I think is ok.

And, my this kind of driving style, the setup is still good condition then is really good already ler.

I like this muffler and setup a lot. No regrets.

If I were to go JFA, I would need to pay double price for sure. Exhaust no need to go for chun one, because they won't last for long.

I think it really depends on which branch you go to, because the guy who did for me is a real nice chap. Before he weld the muffler, he ask me is this the position you want. And also advise me on going for a proper setup.

Some shops, you want this and that, they straight away weld for you without asking your opinion. You pick, they weld and pay,that's it. Those are fakap shops.

I paid RM600+ for midbox, piping and muffler, nice muffler and setup + ganas & bassy sound to my liking, where to find at this price? I love the muffler sound very much.

This post has been edited by zeist: Feb 15 2009, 07:05 PM

@ zeist which branch did u go to?

what about others?

Klang branch.

If we really believe what he says, we'll be dead. I don't trust him anymore for not honoring what he says and to me it's simple, if you're not honest while doing business, that's the end of it We're talking about customer satisfaction, returning customers and trustworthiness. How can you say something that is made in China be made in Taiwan instead? (that's just one freaking example of lies and I have many more to tell).

I think both our requirements are different. You wanted an exhaust system that'll give you "ganas and bassy" sound the moment you start your engine but I wanted something that is as silent as possible. For "ganas and bassy" setup, I wouldn't know if RM600+ is worth it for your setup because it depends what mufflers/midbox you are using. Many of them would cost cheaper compared to a more silent setup. However despite paying a bomb for my exhaust modification at WAI HENG, the sound output from my exhaust is like a roaring tiger (now that really sucks).

You don't have to go JFA for good exhaust and there are many other capable shops around. The reason why I went to WAI HENG is because I trusted this dishonest chap at the first place which I shouldn't

Clawhammer which branch did u went to??

I went to puchong branch before n not satisfy with their welding job...Hentam that welder kaw2 than the boss ask another welder to complete the job..Luckily after that no problems(rust,sound,performance loss)
But for sure i'm not going back there

I went to Setapak and Puchong branch and the Setapak one was horrible. The workmanship and recommendation was totally unacceptable. My mid muffler leaked due to the quality of the part instead of the welding. Nevertheless, it's just a waste of time going to WAI HENG.

the one in between of old klang road and pj
there's a waiheng there..

that one quite ok =)

only that one la

---

Added on February 16, 2009, 1:14 pmis there mufflers from orginally from japan which is lesser than 2' ?

This post has been edited by davvycroix: Feb 16 2009, 01:14 PM

I wouldn't bet on WAI HENG anymore. The workmanship and people working there might be ok but their products are NOT OK

I think i'll just sent my car to other shop to check the sound and performance lost..

go to everco sunway..
today i went there to did an installation for my full exhaust system..
their workmanship quite good n also nice customer service..

The branch that you go to most probably some chao lala ah beng did for you. The guy who did for me is a real nice chap, humble guy named Ah Keong. This guy really know what he is doing. I like his character and attitude, not arrogant nor showing off. You should come down to Klang to meet this guy, if you want to give it a try.

Or, I let you sit in my car, bring you for a spin, let you hear the sound, then you decide from there.

I don't earn anything by recommending you to him, I'm not close to him, only met him twice. Just that I think this guy deserves to earn more.

Aiya, fakap people are everywhere, that's why sometimes we don't get something up to our expectation.

The chap is kweng84? I only trust the person who weld for me, kweng is only doing sales.

Btw, how much did you pay for the setup? Which includes?

If I hantam 6500RPM on 1st and 2nd gear, the sound like Subaru ler.

This post has been edited by zeist: Feb 16 2009, 11:46 PM

I went to 2 WAI HENG's and the first one (Setapak XIN EXHAUST) was totally screwed because their recommendation was totally wrong. The setup was noisy and the car vibrating like mad when you step on the accelerator. The reason is because of the loud humming sound from the mid and rear muffler. After that I changed to a more silent setup in Puchong where I was made to pay RM550. They re-did everything from the front till the rear and the guy also seemed to know what he is doing. However on one fine day, I drove to Cameron Highlands only to know my top speed stays at 170km/h. After that, I went to Genting and came back with a damaged/leaked mid muffler which produces loud humming sound. Not long later, my O2 sensor was broken.

In total, I've spent RM1400+ on WAI HENG but now, I don't use anything from them at all. It's only about 2-3 months and I had everything including piping changed from another shop in Ampang. This new place that I go to have better quality mufflers and are more silent as well.

As I say, what we want is different and mine at 6,500rpm is only some buzzing sound I want a setup that is as silent as possible.

u are totally same with me..went to 2 of their branch..1st at puchong,really dissapointed+wasted my money there!
2nd go to setapak branch,then feel ok a bit..but still lack of power..just the sound really loud at high rev but move like a snail..

This post has been edited by apeq: Feb 17 2009, 01:26 AM

Mine is more of a S-flow setup as well, high revs at 6.5K really much more silent than my previous straight flow setup >_< Mine was done at a different shop, in PJ called Lai Exhaust

Paid RM4xx for the Sflow muffler, 2 years plus, now the sound still good albeit a bit noisier than b4, welding all good

Thanks for sharing shinjite and you have a good point there. The quality of the muffler you've purchased and price you paid for lasted you 2 years but what I got from WAI HENG was totally the opposite.

The sound gets noisier possibly because of the material inside the muffler which absorbs sound was worn off. Well, 2 years plus is pretty good already and even in my previous car, the local made muffler lasted me 2-3 years.

Problem settled at Jian HAng.. And met another Xin exhaust customer over there.. So...

And 1 more thing, my dad saw my car, kena scold like mad say why i go do my exhaust system!
Ask me change back everything! WALAU!!
So any interested please let me know, letting go whole set rm700.. Rugi also no choice.

This post has been edited by squareballs: Feb 17 2009, 06:32 PM

Another XIN Exhaust customer there? Well, I guess we know what it means so another victim of WAI HENG/XIN Exhaust.

So ngam your dad spotted ur car? Bad day dude~

dude , i'm currently driving ford laser 1.6 tx3

&

i wan to know whether these two parts suit my car a not ???
here is the lists :

garrett t25 turbo
HKS Hiper muffler

Any recommend . PLS !!!