speed this afternoon was super stable like never before even on single channel]

stable between 1.20 ~1.35MB/s even though speedtest only show 5~6.5Mbps


test file, window 8 ISO


This post has been edited by chuahcs79: Sep 26 2012, 03:36 PM

I got client can get up to 9mb at Sabah
Belum try belum tau

blacktubi, your speed improve or not after maxis block ICMP ?

No, don't improve at all and even become slower
MF680 Purple LED


B04 baseband + Umobile dashboard


B01 Purple + Umobile dashboard


E367 never had any problem with it.


ZTE devices are a lot of problem. Eg : You can't install MF820D and MF680 dashboard together. Driver different too.

The driver crashed my MF820D which it only ends up in diagnostics mode, reviving it now

This post has been edited by blacktubi: Sep 26 2012, 04:59 PM

wow

bad news,.. hope things turn out ok for u

Found 3 ZTE modem diagnostics protocol. Looking more into it.
NMEA, AT and the standard Qualcomm. Might be the key to revive MF680.

hopefully can revive i wanna revive my 680 too

what do u mean revive?
means mf680 went into diagnostic mode and never came out?

to close diag mode, send this command
AT+ZCDRUN=F

Already reset through qmat.

I need to extract the whole FW, baseband and etc from a modem to flash on another similer hardware modem.

I think I am able to extract the whole nand but I dont think I able to fully backup even the baseband

Any tips?

This post has been edited by blacktubi: Sep 26 2012, 05:19 PM

how about flashing it with umobile's firmware?
you can get it at u.com.my

Umobile firmware don't really works on the MF680 that we have.

DC capabilities not found

Assume different hardware revision.

http://u.com.my/broadband/firmware-upgrade

ic. my 680 is u branded so no issue with this firmware.

otherwise, seek help from zte's facebook page?

ZTE CS simply ignore us

my rm50 dongle gave me this speed

Nice..
What dongle btw?

u mobile is anyhow treating their client like iddiott,. the u mobile firmware i already suspect is not ZTE MF680,.. only support HSPA+ single channel,.. so those customer all go upgrade to dreaming they are on DC 42Mbps network

---

Added on September 26, 2012, 5:58 pmit is Yes dongle,.. expensive and rich people network...

This post has been edited by chuahcs79: Sep 26 2012, 05:58 PM

either this or they got the wrong firmware released

i personally already feel like is HSPA+ single channel firmware,.. but due to the swedish B04 firmware already destroy my ZTE MF680 DC capability, so i go ahead to flash u mobile in too,.. since is cacat,.. why not try any method,..

and end up didnt help at all after verify from QPST and QXDM,..

hmm.. how to verify that?
my unit managed to hit purple, and mdma did confirm its DC-hspa+

speed is faster than my other hspa+ modem.

best and most accurate method to check DC on all Qualcomm Chipset modem posted by Coolstore -> here