yes the Sim need to be 42000/8640 QoS

but also one more very important thing,

if u are in very rural Area or non high density area, the QoS will still fall back and depends on that base station / towers you connected to,.

which is if you Sim is 42000/8640 activate, and base station is support 8640/8640 only in that area,

result : your speed QoS is still 8640 /8640

bear in mind those are purely advertising gimmick as not all base station / tower in whole malaysia is all DC-HSPA+ 42Mbps capable

and also remember maxis did put UP TO 42Mbps !!

Dont forget the UP TO

it is not Maxis Fault, it is a normal advertising gimmick which every ISP is using,..

and they dont put : is 42Mbps capable

they always put : UP TO 42Mbps

many consumer Neglect to see the word UP TO, and straight jump in the next word 42Mbps

---

Added on November 5, 2012, 10:38 pmif your area is too high density, congestion will be the very main issue/factor

This post has been edited by chuahcs79: Nov 5 2012, 10:38 PM

well good luck on that,

i try that before when Maxis was HSPA era ,..

and if both sim is conencted to same tower,

result : 1 sim is fast while the other sim is snail slow,.

unless you able to log on different tower on both sim

well, you dont have to take my word for it, apply and try it yourself

sorry i cannot assist you in 20Mbps speed and above,

speed between 9~11Mbps consider is lucky enough , you should be thankful,.

and becareful what you wish for, might wine up like fruitie case where her area so high speed at begining and now sometimes hardly can achieve 10Mbps even

bear in mind wireless broadband is not like wired broadband can really supply minimum 80% of satisfaction guarantee

---

Added on November 5, 2012, 10:48 pmwell, you gain some & you lose some i guess

This post has been edited by chuahcs79: Nov 5 2012, 10:49 PM

as you can see, DC = dual channel doesn't mean 42Mbps,..

3Mbps also can transmit in DC as in 1.5Mbps x 2

most people thinking DC = 42Mbps,

which is wrong concept,

Tonight high speed arrive early





This post has been edited by chuahcs79: Nov 6 2012, 12:49 AM

these godness speed only happen in graveyard shift,.
so have to enjoy it while it last

ZTE MF680



this is single channel modem Option Icon 505 HSPA 14.4Mbps

---

Added on November 6, 2012, 1:49 amthat yagi can throw away liao lo,. simply after they ever test your Panel,.

anyhow roughly point also get RSSI : -51dBm

This post has been edited by chuahcs79: Nov 6 2012, 01:54 AM

Day time speed ,
no more high speed ike graveyard shift

maxis always block p2p,.

until graveyard shift maxis will open those port,.

time is depends on your area

some area port open 2am some is 12am and some is 3am

maxis WBB & maxis FTTH is both different platform and they dont share the bandwidth either

Bro wen u get stabel super consistency speed and fibre like connection when loading websites, u will thanks to the "poison "

will post second review when blacktubi TS-9 convertor arrive,.

second review = ZTE MF680 + panel + TL-MR3420

right now poison you guys again

E372 huawei set ( tweaked 33 TX )

Before adding antenna :
[attachmentid=3142415]


After Adding antenna:
[attachmentid=3142416]


i install panel @ outdoor wall beside my window & follow the Handy Guide on Direction from Blacktubi, ( amazing guide,..) result is as u can see

Anyone fallen FULLY into this poison yet ?

http://forum.lowyat.net/index.php?showtopic=512216&hl=

i guess tons of people volunteer to fall into deadly venom,

if anymore doubt on the panel, i can assist to show test in any doubt you have too,

nope, i cant because tl-mr3420 V2 only support tp link stock firmware which bad firmware compare to Openwrt on V1 i am using,.

try it yourself to experience it ,.

It is so weird that QXDM WCDMA Power showing DC is ON but the WCDMA HSDPA Decoder showing 0% DC

WCDMA power
[attachmentid=3142532]

WCDMA HSDPA Decoder
[attachmentid=3142534]



This post has been edited by chuahcs79: Nov 7 2012, 02:48 AM