Fuyooh..so kecoh this facebook, guess we better share our knowledge here in lowyat. Kinda think facebook was getting out of control. Maybe it is because lowyat forum is moderated whereas facebook is self moderated?

Facebook Prevoc also got politics ...haish...

Thought it was created to allow sharing of knowledge of our beloved Preve...sad case indeed...

Do not judge the people based on their appearance...we only know the true "colour" of the person after many months.

Bro...tak payah tidur ke? 2am still in lowyat? Too much rage?

Off topic, this is quite common in many corporations...people going up the corporate ladder not because of skills or abilities but "other" abilities. Consultants sounds more like conmen...

---

Added on October 10, 2012, 9:29 amMorning bro.....trying to pull your leg...at least this forum is "alive" again..

This post has been edited by Gigabit: Oct 10 2012, 09:29 AM

Can share me the picture?

This is the official reply from the coup members from the old Prevoc FB. For sharing here. Sejauh mana kebenaran kenyataan ini?



Penyelaras Kumpulan
‎{Annoucement }>> Assalamualaikum dan selamat sejahtera. Memperkenalkan kami Kumpulan Penyelaras (KP) yg terdiri dari BARISAN AHLI VETERAN Proton Preve Owners Club. Kami merupakan Admin/Moderator baru bagi group ini.

Kami ingin meminta maaf jika apa2 yang berlaku semalam telah membuatkan anda semua tertanya-tanya apa sebenarnya yang berlaku. Kami memerlukan masa untuk berbincang sesama Ahli Tertinggi dan disebabkan itu lewat membuat makluman pada tuan2/puan2 disini.

Di sini kami ingin memaklumkan mulai hari ini, kumpulan Facebook ini telah memutuskan hubungan dengan Kelab PREVOC.
Ini berlaku berikutan kepincangan Jawatankuasa PREVOC. Antara isu-isu yang membawa kepada kemelut ini adalah:

1. Isu kuasa yang tertumpu kepada hanya beberapa AJK Tertinggi
2. Isu ada diantara AJK yg bukan pemilik Proton Preve
3. Isu forum Preve yang dimiliki oleh individu yg sama yg memiliki forum Proton lain
4. Isu pengunaan akaun individu untuk penjualan barangan jenama kelab dan ketiadaan akaun kelab
5. Isu tidak mengambil Admin baru dari ahli Facebook yg sedia-aktif dan penumpuan kuasa ke ahli yg tidak aktif dan tiada computer
6. Isu AJK terbabit didalam penjualan barangan di Facebook bersandarkan ‘endorsement’ kelab
7. Isu penyatuan dan penyertaan aktiviti kelab sesama semua pemilik Preve, tidak mengira kelab lain.

Susulan perkara diatas, pihak AJK dan Moderators telah melepaskan jawatan masing masing sebagai AJK dan Admin dan memaklumkan perkara tersebut kepada kami KP dan ahli-ahli veteran disini.

KP terpaksa mengambil tindakan untuk kebaikan Kumpulan Facebook kerana tidak mahu ahli digunakan untuk kepentingan peribadi AJK PREVOC dengan ketetapan berikut
1. Avatar Kumpulan Penyelaras (KP) yang terdiri daripada beberapa ahli veteran dan ‘founding member’ kumpulan Facebook ini telah mengambil-alih status selaku Admin. Secara khusus, KP adalah terdiri daripada beberapa individu . KP akan menambah lagi keahlian di masa yang akan datang.
2. Semua keahlian dibuka kecuali AJK PREVOC yg berpentingan sendiri.
3. Semua bentuk aktiviti social / TT yg merangkumi semual pemilik Preve dialu-alukan
4. Kumpulan Proton Preve Owners Club tidak akan bernaung atau berpaut kepada mana-mana Kelab rasmi atau tidak rasmi.
5. Kumpulan ini akan mengambil sikap pendirian berikut:
- berkongsi maklumat dengan memberi kredit kepada sumber maklumat sepatutnya,
- menyertai semua bentuk aktiviti riadah dan social tanpa memilih kumpulan pengacara dan pengelola.

Tata-susila Kumpulan:
i- tiada perbincangan politik
ii- tiada perbincangan agama
iii- hormat –menghormati semua
iv- akur kepada ketetapan Admin.

Diharap dengan pengumuman ini tuan2/puan semua boleh berterusan memberikan sokongan kepada kumpulan ini dan masa yang sama berkongsi maklumat sesama kita.

Sekian untuk makluman sekalian. Terima Kasih.

Baik buka parti politik....

Bro Dhuang.....how could you park the car outside in the sun and then in the afternoon, heavy rain

Bro,

You do have a choice and it is Cap Square underground carpark. There is so many empty slots and makes me wonder why no one parking there? Yes, I know it is expensive but if can protect the car from sun and rain, it is worth it (if your car is brand new, if more than 5 years, do not bother)

Did not bother to tint so much, why risk it when JPJ can just tear everything if they do not like it?

I kinda like the sound, not annoying to me. The only sound that is annoying is sounds from kapchai, buses, lorries exhaust.

So far, the feedback received is for Senawang SC. Service is good and response to complaints are handled and resolved. For the other one, not sure.

Suggestion, after do sierra glow, can actually put Optimum Opti Coat but it ain't cheap, RM300

However, do note that if the whole car have no more beads, he will have charge a fee for the service.

Probably less than RM700. I have not done it before. Best you email Mr. Choong or SMS him.

Optimum opti coat would be nice if it was cheaper by RM200. Current selling price is RM300 and it is only 200ml in quantity.

It is permanent coating bro.....of course it is as expensive as gold

Bro,

This is taken from

http://forum.lowyat.net/topic/2491249

Item(s): Optimum Opti-Coat 2.0

Package includes: 1 syringe (20ml) Optimum Opti-Coat 2.0 + 1 foam applicator

Price: RM300 (COD)/RM310 (Postage)

Picture:



Opti-Coat 2.0

Description
You read it right. Optimum Opti-Coat 2.0 is a permanent coating that protects automotive paint over its lifetime! Unlike a wax or sealant, Optimum Opti-Coat 2.0 will not wash or wear off. It acts as a second layer of clear coat which provides increased protection against the elements. Formerly only available to professionals, Optimum Opti-Coat 2.0 is now available to the public in a more user-friendly formula.

Optimum Opti-Coat 2.0 is a clear resin coating, much like the clear coat that already exists on your vehicle. And just like your factory clear coat, Optimum Opti-Coat 2.0 is meant to be permanent! Optimum Opti-Coat 2.0 can be applied to all exterior surfaces. It is not recommended for glass since improper application can affect visibility. For other exterior surfaces, Optimum Opti-Coat 2.0 is a highly effective, transparent protective coating.

Optimum Opti-Coat 2.0 is an additional barrier between the elements and your vehicle's paint. The paint will retain its color and contaminants will be blocked out to keep the paint smooth and clean. Unlike waxes and paint sealants that require frequent reapplication, Optimum Opti-Coat 2.0 provides constant, unyielding protection for the life of your vehicle's finish!

Optimum Opti-Coat 2.0 was modified slightly from the original professional formula. (The pro version is still available under the Opti-Guard name.) Optimum Opti-Coat 2.0 cures more slowly, which gives you more time to apply the coating correctly.

Because Optimum Opti-Coat 2.0 is permanent, the paint finish has to be properly prepared before applying it. Any blemishes or contamination on the paint will be permanently locked in so remove them first! On a properly prepared paint finish, Optimum Opti-Coat 2.0 will look clear, smooth, and clean.

Note: Optimum Opti-Coat 2.0 is not to be confused with other waxes, sealants or nano-coatings, this is different. Optimum Opti-Coat 2.0 uses a resin technology that forms a permanent bond to paint and cures, just like an extra layer of clear coat.

Once Optimum Opti-Coat 2.0 cures, washing is the only maintenance needed to keep your vehicle looking fantastic. The coating can be clayed but it should not be necessary since Opti-Coat 2.0 releases contaminants easily. Use detail sprays as desired to intensify the gloss. You can also use Optimum Poli-Seal by hand or with dual action polisher with a foam finishing pad to clean the paint over time.

Say goodbye to waxing! Optimum Opti-Coat 2.0 provides permanent paint protection to keep your vehicle looking its best indefinitely!

How to Use
1) Do a proper paint correction to remove any defects.
2) Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones.
3) Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel.
4) Wipe Opti-Coat onto a single panel at a time in a thin layer using two directions, front to back, and then side to side.
5) Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear.
6) Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.
7) Repeat steps 1-6 for each panel where application is desired. Not recommended for glass.

NOTE

1) The Opti-Coat is PERMANENT for its nature. It is not recommended for non-experienced user/detailer or beginner in car care. We DO NOT guarantee any dissatisfaction in outcome due to any failure or any mis-application of user. User is on own liability, responsibility, and accountability.

2) Opti-Coat application service can inquired.

Disclaimer: I am not related and not a reseller of Optimum products.

Seriously, it is a good product if you want to have minimum maintenance of the car coat and paint.

---

Added on October 16, 2012, 4:54 pmDepends on individual i think, if still got gloss but not beads, acceptable for you or not? If not acceptable, you have to do coating every 3 months? Use opti coat, do once, no need do again? Your choice.

This post has been edited by Gigabit: Oct 16 2012, 04:54 PM